BearingIndex
THE BEARINGINDEX DIRECTORY

Chuangda

Zhejiang Chuangda supplies linear-motion components including ball screws, profiled guides, round shafts and linear bushings. Its SPF page contains an SFU drawing, while EK fixed supports and HGH guides have their own dimensions. Resolve the exact drawing and component interfaces before treating the catalogue as an assembled-axis offer.

CHUANGDA · LINEAR-MOTION COMPONENTS

Build the axis around approved interfaces, not a matching family name.

Zhejiang Chuangda Bearing Manufacturing Co., Ltd. (浙江创达轴承制造有限公司) lists ball screws, profiled linear guides, cylindrical shafts, linear bearings, flanged bearings and sliding units. Buyers can enquire about several components of a motion axis, but the order still needs to define who matches, machines and checks the assembled parts. Official company range [1]

Prepare a sourcing inquiry
01

The SPF page shows an SFU drawing: settle the designation before machining.

The official product title is SPF single-nut series, but its actual detail image is headed SFU single-nut series and lists SFU model numbers. The image distinguishes screw diameter, lead, ball diameter, nut envelope, flange holes and oil port. This naming discrepancy needs written clarification; it is not a basis for declaring SPF and SFU interchangeable. Actual title and drawing [2]

Actual drawing rowScrew and leadNut length LProcurement implication
SFU01604-416 mm / 4 mm40 mmObtain the confirmed series and matching screw/nut drawing.
SFU01605-416 mm / 5 mm50 mmThe same screw diameter does not preserve lead or nut length.

Give required travel, overall screw length, end machining, nut orientation, fixing-hole pattern and lubrication access. Specify lead accuracy, backlash or preload, load, speed and required positioning performance. Ask whether the quote includes a matched screw and nut, end machining, support bearings, locknut and coupler, or individual parts only. Approve a revision-controlled assembly drawing before releasing mating parts.

The illustrated flange patterns change between smaller and larger screw diameters, and the drawing marks the oil port Q separately. Check fastener and maintenance access in the actual machine; matching nominal diameter alone does not make a drop-in replacement.

02

EK10 and EK12 share mounting dimensions but accept different shaft ends.

The EK detail is explicitly the fixed side. Its actual drawing lists EK10 with d1 = 10 mm and EK12 with d1 = 12 mm, while both rows show B = 70 mm, H = 43 mm and mounting pitch P = 52 mm. A common outside mounting envelope therefore does not establish the same screw-end fit. Actual EK fixed-end table [3]

Freeze the machined shaft interface

Confirm bearing-seat diameter and tolerance, shoulder position, thread/locknut, axial locating arrangement and coupling interface. Have the supplier identify the included bearing arrangement and its permissible axial/radial duty.

Define the whole support arrangement

Name the opposite-end support or free-end condition and the actual bearing span. Request the assembled alignment and rotation checks, mounting fasteners, tightening instructions and lubrication requirements. The fixed-end catalogue page alone does not specify the complete axis.

Coordinate screw supplier and support supplier against the same drawing. If Chuangda is asked to supply both, require written responsibility for their mating fit and assembled acceptance, rather than separate quotations with unverified interfaces.

03

HGH20CA and HGH20HA need different block-envelope checks.

The actual HGH drawing covers high-assembly square blocks in CA and HA forms. For size 20, it shows a shared assembly height H = 30 mm, but HGH20CA has L = 77.5 mm and HGH20HA has L = 92.2 mm. Their published dynamic ratings also differ, 17.75 and 21.18 kN respectively. These are catalogue values for the named forms, not an installed life or accuracy guarantee. Actual HGH-CA / HGH-HA drawing [4]

Confirm the full block/rail designation, preload, accuracy class, seal/end-cap package, rail length, hole pitch and end distance. State block count and spacing, load and overturning moments, stroke, mounting orientation and contamination exposure. A family code shared with another catalogue does not prove cross-brand block/rail interchange.

  1. Agree the rail and screw datums. Record the machine reference surfaces, rail alignment, screw parallelism and permissible mounting errors.
  2. Approve the actual component set. Match blocks to rails and screw to nut/supports; identify what is assembled and inspected by the supplier.
  3. Accept the axis under its duty. Define travel accuracy/repeatability, backlash, running force, temperature and representative load tests with the machine builder.

Chuangda also lists round-shaft and bushing arrangements. Select that architecture from the actual load, support and mounting design; do not substitute a cylindrical shaft system for a profiled guide merely because both provide linear motion. Separate product architectures [1]

04

Keep the historical shaft project separate from today’s delivery promise.

Testing company Zhejiang Duopu publishes a notice dated 5 November 2018 for Chuangda’s environmental acceptance monitoring report, titled a project for 500,000 metres of linear shafts annually. This is actual dated project documentation on the testing provider’s site. The project title does not establish current production, available capacity, product accuracy or certification of a complete motion system. The linked report attachment has not been used here for additional technical claims. Actual testing-provider publication [5]

For the intended order, request the current production address, process allocation for shaft/screw/nut/rail components, outsourced operations, material and treatment records, and measurement evidence for the agreed tolerances. Agree lot traceability and approval before changes to matched parts, preload or finishing.

The dedicated contact publishes 13 Shiting Road, Nanmingshan Subdistrict, Shuige, Liandu District, Lishui, telephone/fax 0578-2695755, mobiles 15372268523 (Wu Xinlei) and 13884398709, and [email protected]. Confirm the contracting and audit/receiving location with the responsible contact. Actual contact page [6]

Send an assembly drawing and component schedule, not only a list of family names. Request an itemised offer with sample approval, tooling/end-machining scope, quantities, serial lead time, corrosion protection, packing, delivery terms and evidence required for a claim. Keep unresolved SPF/SFU naming out of the released purchase specification.

YOUR NEXT STEP

Prepare a Chuangda motion-axis enquiry

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

0 model records

No documented models yet.

Try broader requirements, or explore the manufacturer’s published product scope.

Explore manufacturers →

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Official company page actually readChuangda · company introduction ↗

    Separate linear-motion component families and application descriptions; no complete-system performance implied.

  2. Official page and drawing viewed in browserChuangda · SPF single-nut detail ↗

    SPF title versus actual SFU image; 01604/01605 rows, lead and nut-length differences.

  3. Official drawing viewed in browserChuangda · EK fixed-side support ↗

    EK10/12 bore differences with shared B/H/P mounting dimensions; no bearing arrangement or complete-axis approval inferred.

  4. Official dimensional and rating drawing viewedChuangda · HGH linear guide ↗

    HGH20CA/HA lengths and dynamic ratings; installation, accuracy and interchange need confirmation.

  5. Testing provider primary publication actually readZhejiang Duopu · Chuangda environmental report publication ↗

    2018-11-05 historical linear-shaft project listing; attachment not used, current capacity and product certification not established.

  6. Official current displayed contact actually readChuangda · contact ↗

    Shiting Road 13, 2695755, Wu Xinlei/mobile contacts and email; receiving and contracting entity to confirm.

Report a source correction → · Return to inquiry checklist ↑

Chuangda published product scope reviewed

The manufacturer website describes linear bearings and ball-screw support products.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:33

Source documentation retained for editorial review.