BearingIndex
THE BEARINGINDEX DIRECTORY

Chuangxian

Ningbo Chuangxian: office-automation, power-tool, robot and automotive bearing positioning, with a source-led guide to part specifications and quality/sustainability evidence.

CHUANGXIAN · NINGBO

Move from an application label to a controlled part specification.

Chuangxian’s own company page names office automation, power tools, robotics and automotive bearings. Company profile [1] Its public reports provide more useful procurement questions than the product marketing alone: ask which exact part, inspection record and current site support your project. An application category is not an approved machine or vehicle fitment.

Prepare a sourcing inquiry
01

A-006, A-004 and A-001 identify website entries—not complete engineering approvals.

The reviewed pages name an automotive bearing as A-006, a thin-wall bearing as A-004 under power tools, and an angular-contact bearing as A-001 under office automation. Each repeats the same general motor/bearing explanation instead of supplying a model-specific dimensional and performance sheet. A-006 [2] A-004 [3] A-001 [4] Use these codes to identify the inquiry page; do not treat them as universal bearing designations or supported cross-references.

Automotive A-006

Identify the actual assembly position, complete OE/reference and load/speed/environment. Request the supplier’s proposed designation and drawing, plus project-specific qualification evidence. The generic description does not identify a supported vehicle or component location.

Thin-wall A-004

Supply the required section/envelope, shaft and housing fits, mounting stiffness and relevant loads. Ask for the actual offered geometry, tolerances and installed performance evidence. The page gives no numerical wall thickness, dimensions or load ratings to release a design against.

Angular-contact A-001

State axial/radial load direction, arrangement and any matching/preload requirement. Obtain contact angle, complete designation, cage/lubrication and accuracy requirements on the offered drawing. None of these should be inferred from its office-automation category.

02

Use the quality report to request records at the right level.

The homepage states P5 accuracy and Z4V4 vibration/noise performance, plus IATF 16949 and RoHS wording. [5] Those are manufacturer claims. Obtain the applicable measurement standard, test conditions and agreed limits for your exact configuration, along with current certificate/declaration scope; no blanket qualification of every product is made here.

The quality-integrity report is published on 27 May 2025 and explicitly covers January–December 2024. It describes incoming, process and final inspection, instrument calibration/traceability and batch inspection of incoming materials. [6] That gives a basis for asking for evidence rather than relying on equipment-gallery labels.

Request a part-linked inspection trail

Ask which incoming material checks, process control points and final characteristics apply to your offered bearing. Agree measuring methods and acceptance limits, request relevant calibration status and sample/lot records, and require traceability to the approved construction.

The report discusses ISO systems and Zhejiang Manufacturing standards. [6] Request the exact current certificate or applicable standard number, issuer, entity, site, product scope and validity. A report title or statement of adopting a system is not independent verification of a valid certificate.

03

The near-zero-carbon publication is a strategy, not an achieved product footprint.

The company’s 20 May 2025 strategy describes a 2024 emissions baseline and future reduction/energy goals. It distinguishes fuel-related and purchased-electricity emissions and discusses eventual near-zero-carbon development. [7] No conclusion that the factory has already reached zero emissions, or that an individual bearing has a verified low-carbon footprint, follows from this document.

For a sourcing programme with environmental requirements, ask for the latest reporting period, site boundary, methodology and verification record. If you need a product footprint, request the part-specific boundary, allocation and supporting data separately. Confirm progress against the strategy with actual results; do not label planned electricity substitution or future certification as completed.

04

Keep the legal entity, website and manufacturing site connected.

The official profile/footer names 宁波创先轴承有限公司 in Jiulonghu Development Area, Zhenhai, Ningbo. [1] The government-hosted 2024 first-batch technology-based SME list includes the exact entity at entry 348, number 2024330211A8000348. [8] This corroborates a dated enterprise record; it is not bearing performance or current certificate validation.

A separate manufacturer website, icxbearing.com, names Zhejiang Dacheng and uses an email at cxbearings.cn. [9] Shared email-domain usage alone does not establish a merger, renamed entity or common manufacturing site. Confirm which legal entity owns the quotation and which factory will fulfil it before transferring qualification records between names.

On this review, the listed website and its English route produced a certificate-domain warning in the browser; the public Chinese HTTP pages were readable and used for this research. No login or document submission was performed. Request the official current catalogue and contact route directly if your browser cannot open the cited pages; do not infer that the company has ceased operating.

YOUR NEXT STEP

Prepare a Chuangxian evidence-based inquiry.

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

0 model records

No documented models yet.

Try broader requirements, or explore the manufacturer’s published product scope.

Explore manufacturers →

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Manufacturer publicationChuangxian · official company profile ↗

    Chinese entity, Jiulonghu positioning and application routes; public HTTP text read, browser certificate warning recorded.

  2. Manufacturer catalogue entryChuangxian · automotive A-006 ↗

    Named entry/category; generic repeated description, no complete numerical specification or fitment obtained.

  3. Manufacturer catalogue entryChuangxian · thin-wall A-004 ↗

    Named entry under power tools; no numerical wall geometry or model-level load specification obtained.

  4. Manufacturer catalogue entryChuangxian · angular-contact A-001 ↗

    Named entry under office automation; complete designation/contact angle/arrangement not disclosed in reviewed text.

  5. Manufacturer claimsChuangxian · official homepage ↗

    P5/Z4V4, IATF/RoHS and laboratory wording; current validity or blanket product conformity not independently verified.

  6. Dated manufacturer self-reportChuangxian · 2024 quality-integrity report, published 27 May 2025 ↗

    2024 inspection/calibration policies, standards and general commitments; not an independent audit or part-specific guarantee.

  7. Manufacturer strategy documentChuangxian · near-zero-carbon development strategy, 20 May 2025 ↗

    2024 baseline and future goals; no achieved zero-carbon factory or verified bearing footprint established.

  8. Dated government enterprise recordNingbo · 2024 first-batch technology-based SME list ↗

    Exact Chinese entity, entry 348 and 2024330211A8000348; not product qualification.

  9. Separate manufacturer publicationZhejiang Dacheng · separate manufacturer website ↗

    Different company name with cxbearings.cn email domain; corporate relationship and factory equivalence not established.

Report a source correction → · Return to inquiry checklist ↑

Chuangxian published product scope reviewed

The manufacturer website describes bearings for compact machinery and automation.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:34

Source documentation retained for editorial review.