BearingIndex
THE BEARINGINDEX DIRECTORY

Chunsheng

Yantai Chunsheng specialises in internal-combustion-engine sliding bearings and related components. Its actual listings separate CW200 main and connecting-rod bearings from CURSOR10/CURSOR13, CAT C7 and WD615 thrust parts. Buying starts with engine revision, bearing position, journal condition and the approved shell or thrust drawing; a shared engine-family label alone does not establish interchangeability.

CHUNSHENG · ENGINE BEARING SHELLS, THRUST PARTS AND REPAIR DIMENSIONS

Identify the engine position and journal condition before ordering the bearing set.

Yantai Chunsheng Sliding Bearing Co., Ltd. (烟台春生滑动轴承有限公司) describes development and manufacture of engine bearing shells, flanged shells and rolled bushings. The actual range separates main, connecting-rod and thrust parts rather than offering a single interchangeable “engine bearing.” Use the engine and controlled component drawing to select the correct route. Actual company scope [1] Actual named product categories [2]

Prepare a sourcing inquiry
01

Separate main, connecting-rod and thrust orders before comparing quotes.

The actual details publish CW200 main bearing and CW200 connecting-rod bearing separately, dated 9 August 2022. The CURSOR10 detail is specifically a thrust bearing, also published that day. Their text does not supply a complete OE interchange, repair-size or material table. Treat these as starting product references and request the current controlled candidate specification. Actual CW200 main detail [3] Actual CW200 conrod detail [4] Actual CURSOR10 thrust detail [5]

PositionInformation to sendWhat to resolve
Main bearing shellsEngine code/revision, journal position, old part number, housing/journal drawing and any measured wear.Upper/lower shell differences, oil groove/hole arrangement, locating features and exact set contents.
Connecting-rod shellsEngine and rod revision, crankpin size/condition, rod big-end housing and old shell markings.Correct shell halves, thickness and retention/locating geometry; do not substitute a main shell by engine name.
Thrust pieces or flanged shellThrust position, mating faces, existing construction, measured end float and drawing.Separate washer versus integral flange, thickness, orientation, oilways and assembled axial-clearance acceptance.

Specify whether the quotation is for an individual half-shell, a pair, a journal position or a complete engine set. List quantities and included thrust pieces explicitly; a product category does not establish a complete kit.

02

A replacement must fit the measured engine, not just its family name.

Standard-size production

Send the journal and housing tolerances, shell drawing, installation torque/procedure and required assembled clearance. Agree how wall thickness, free shape and shell crush/retention will be measured and accepted in the intended housing.

Engine repair

Provide actual journal measurements, grinding history, out-of-round/taper observations and existing markings. Identify the required repair or undersize convention and its units. Request a drawing-confirmed proposal; do not assume a catalogue engine label guarantees every repair size is offered.

Compare oil holes and grooves, locating tabs, widths, edge relief and any flange position against the engine drawing. Confirm how the supplied upper/lower parts are marked and installed. These checks matter before startup: a visually similar shell can still present a different oilway or assembled geometry.

The website lists several families, including CW200, 6170ZC, 206L and multiple thrust categories. It also displays 0.00 price fields and an unrelated-looking “TiO2” category. Neither provides a usable commercial quote or proves a bearing-material specification. Request the exact part, drawing revision, current availability and price in writing. Actual category and placeholder-price publication [2]

03

Agree the bearing layers and operating evidence for the actual component.

The introduction says Chunsheng develops shells, flanged shells and rolled bushings and names engine manufacturers/applications. It also describes bench testing and batch production for some products. Those company statements do not establish a current approval for every bearing sold under an engine-family name. Ask for the exact approved part/revision, test conditions and permission to use any customer qualification evidence. Actual application and bench-test claims [1]

Specify the required backing and lining material, layer thicknesses and any overlay/coating by the controlled drawing or applicable customer specification. Ask for material certificates and process/lot traceability. The pages reviewed do not establish a universal bimetal, trimetal, lead-free or polymer construction; do not select one from photographs or the manufacturer name.

  1. Describe the engine duty. Provide speed/load cycle, oil specification, pressure/temperature, starts and application environment; include relevant failure observations for replacements.
  2. Approve representative samples. Review geometry, layer/material evidence and assembled clearance or end float, then agree the applicable component and engine tests.
  3. Agree validation limits. Define test duration/conditions, wear or damage criteria and teardown evidence; identify who accepts the engine-level result.
  4. Freeze repeat supply. Require notification before changes to lining/overlay, forming, machining, process or production site.

For a rolled bushing enquiry, supply the mating-pin drawing, housing fit, oilway and assembled machining/clearance requirements separately. A shell or thrust-part drawing cannot stand in for the bushing specification.

04

Link the published inspection capability to the lot you receive.

The equipment page actually names a semi-circle perimeter detector, roundness detector, microscope and universal tool microscope. These give useful inspection questions: ask for the approved perimeter/crush method, thickness/profile and oilway checks, calibrated equipment, sampling plan and recorded results for your batch. An equipment caption alone supplies none of those lot results. Actual processing/test equipment captions [6]

The official honour page labels invention-patent certificates; no current product or automotive-system certificate scope was established from its text. Obtain any contract-required current certificate original and verify the exact entity, site and activity, alongside the candidate’s own test evidence. Actual honour publication and its limited text [7]

The China Internal Combustion Engine Industry Association’s 28 February 2023 bearing-shell branch list includes the exact company name. This supports a dated industry identity, not engine fitment or product approval. Actual primary association member list [8]

The dedicated contact gives 0535-3942168, [email protected] and No. 27 Jingsi Road, Yantai High-tech Development Zone, postcode 264670. Confirm the engineering owner, current manufacturing and sample receiving point, order quantity, packaging to protect shell surfaces, delivery and warranty. Actual official contact [9]

YOUR NEXT STEP

Prepare a Chunsheng engine-shell or thrust enquiry

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

0 model records

No documented models yet.

Try broader requirements, or explore the manufacturer’s published product scope.

Explore manufacturers →

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Official actual company introductionChunsheng · engine sliding-bearing company scope ↗

    Shell/flanged-shell/rolled-bushing scope and company application claims; not current approval of all named engine parts.

  2. Official actual product listingChunsheng · actual product categories ↗

    Distinct engine/position categories and placeholder prices; complete kits, drawings and material stack not established.

  3. Official actual detail dated 9 August 2022Chunsheng · CW200 main bearing ↗

    Main position label; current part interchange, dimensions and material require confirmation.

  4. Official actual detail dated 9 August 2022Chunsheng · CW200 conrod bearing ↗

    Separate connecting-rod reference; not identical to the main-bearing order.

  5. Official actual detail dated 9 August 2022Chunsheng · CURSOR10 thrust bearing ↗

    Thrust component reference; complete fitment/repair-size drawing not established.

  6. Official actual instrument captionsChunsheng · inspection equipment ↗

    Perimeter/roundness/microscope instruments; no buyer-lot results or calibrated method established.

  7. Official actual honour-page textChunsheng · honours ↗

    Patent certificate labels; current automotive/system scope not verified from text.

  8. Primary association list dated 28 February 2023CICEIA · bearing-shell branch member list ↗

    Exact company listed; dated membership evidence, not product qualification.

  9. Official actual contact textChunsheng · dedicated contact ↗

    Telephone, email and Jingsi27 address; current engineering/site assignment requires confirmation.

Report a source correction → · Return to inquiry checklist ↑

Chunsheng published product scope reviewed

The manufacturer website describes sliding bearings for internal-combustion engines.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:33

Source documentation retained for editorial review.