BearingIndex
THE BEARINGINDEX DIRECTORY

CMC

Yantai CMC publishes single/double-row tapered bearings, double-row angular-contact bearings, hub units and custom roller/bearing work. Its production description identifies heat treatment, grinding and assembly, while its hub test facilities suggest concrete validation questions. A 2026 municipal disclosure provides a narrower, independently checkable result for two sampled tapered-bearing batches; it is not universal product approval.

YANTAI CMC · TAPERED BEARINGS, HUB UNITS AND BATCH EVIDENCE

Separate the bearing setting, wheel-hub interface and evidence for your order.

Yantai CMC Bearing Co., Ltd. (烟台西蒙西轴承有限公司) publishes single- and double-row tapered bearings, double-row angular-contact bearings, and second/third-generation wheel-hub units. Its dedicated introduction dates the company to 1989. The useful sourcing distinction is whether you need separable bearing components, an agreed double-row setting, a complete hub unit or a drawing-specific part. Actual company introduction [1]

Prepare a sourcing inquiry
01

Decide who supplies the complete taper assembly and who sets it.

The actual single-row detail identifies GCr15 high-carbon chromium bearing steel, a separable construction and adjustment during mounting. The double-row detail discusses radial and bidirectional axial loads, but provides no complete candidate drawing or model-specific setting table. Do not carry a generic factory-setting statement into an order without the quoted assembly’s tolerances and instructions. Actual single-row material/construction description [2] Actual double-row detail [3]

Order routeSpecify before quotationAcceptance to agree
Single-row cone/cup or pairFull cone and cup identities, metric/inch units, assembled envelope, arrangement and replacement drawing.Matched compatibility, running accuracy and mounted clearance/preload procedure; identify the party responsible for adjustment.
Double-row assemblyArrangement, spacers/retention, load directions, shaft/housing fits and temperature.Supplied setting and its measurement conditions, assembly orientation and change control for matched components.
Industrial applicationSpeed, radial/axial loads, shocks, lubrication and available space.Candidate ratings and service calculation, material/heat-treatment evidence and drawing-based dimensional inspection.

Matching bore size or a familiar series is insufficient for mixing cups, cones or spacers. For a replacement, retain the complete markings and the original assembly setting; ask for a controlled proposal against that configuration.

02

Validate the hub as an assembly, not only as a bearing.

The hub detail explains integration of bearing, lubrication and sealing, but does not provide a vehicle/OE interchange table, complete flange drawing or sensor specification. The company introduction advertises second/third-generation units; confirm which actual construction and part number is proposed. A generic “maintenance-free” description does not establish correct installation or fitment. Actual hub-unit detail [4] Advertised hub generations [1]

Replacement enquiry

Provide vehicle/axle position, original part number and full markings, flange/bolt pattern, pilot dimensions, offset and shaft/spline interface. Where applicable, include the encoder, sensor location, connector and required signal compatibility. Request written fitment against your exact assembly.

New platform enquiry

Provide wheel/tyre and brake interfaces, design loads, speed/duty, mounting stiffness, tightening/retention method, environment and expected validation programme. Agree drawing ownership, sample build and vehicle-level acceptance responsibilities.

The homepage actually lists hub simulation, bearing fatigue-life, mud/salt-water and hub-unit torque test machines. Ask which tests apply to the quoted unit, using what loads, temperatures, contamination cycles, sample quantities and pass limits, and request the actual reports. A photograph of a test machine does not prove a candidate has passed your programme. Actual production and test-facility descriptions [5]

Agree seal and lubricant specification, starting/running torque, axial movement, noise/runout and traceability at dispatch. Clarify special installation tools, tightening procedure and handling of a damaged encoder/seal before sample approval.

03

Use the custom range to resolve an actual drawing problem.

The custom page specifically names single- and double-row tapered bearings with an outer-ring retaining flange, and sleeves. The roller page offers design/manufacture to customer requirements. These are more useful leads than treating “custom” as unlimited capability. Send the controlled part drawing and ask which geometry/material/process can be produced and inspected. Actual custom alternatives [6] Actual roller-design offer [7]

For rollers, define taper/profile, length, end geometry, material, hardness, finish, tolerances and required sorting/lot consistency. For a retaining flange or sleeve, define mating features, retention/load path and inspection datums. Agree whether the supplier accepts responsibility for a component alone or for the assembled bearing performance.

The homepage describes protective-atmosphere belt furnaces, automated and single-machine grinding lines, and assembly measurements including axial clearance and starting torque. The technical centre describes CAD/CAE analysis. Convert these published facilities into order evidence: material certificate, heat-treatment lot, grinding/geometry inspection, assembly setting and agreed functional results. Request calibrated methods and the actual process route rather than accepting facility counts as available capacity. Actual manufacturing/assembly descriptions [5] Actual technical-centre description [8]

  1. Freeze the drawing. Agree material, interfaces, setting and acceptance limits before samples.
  2. Review representative evidence. Link the sample and test reports to the drawing revision and actual production process.
  3. Control repeat supply. Agree lot traceability, inspection records and notification before changes to material, tooling, process, seals or manufacturing site.
04

Use the public result at its actual scope, then verify the current order.

Yantai’s market-regulation disclosure, published 15 April 2026, records passing results for CMC 30204, batch QQ250301ZD, and 30302, batch QQ220401ZD, sampled on 13 October 2025. It identifies legal entity credit code 9137060061341314XP. These are specific sampled-batch findings, not approval of all sizes or future shipments. Ask for the inspection evidence and traceability of your actual order. Actual municipal results, entries 267–268 [9]

The official quality page lists historic milestones including IATF 16949:2016 in July 2018 and ISO 14001:2015 in January 2017. Obtain the current certificate original, issuing body, validity and covered site/activity; these dated milestones alone cannot establish current status. A 2023 development-zone publication describes the company’s original joint-venture background and subsequent Jindong acquisition, so confirm the present legal seller rather than presenting the founding ownership as the current shareholding. Actual certification history [10] Dated development-zone company information [11]

The dedicated sales contact is +86-535-6374732 / +86-535-6371085, [email protected], at 181 Changjiang Road, Yantai Economic and Technological Development Zone, Shandong. Confirm engineering responsibility, receiving address, current candidate availability, sample/production schedule, quote and warranty. The recruiting contact in the government publication is not the sales enquiry route. Actual dedicated company contact [12]

YOUR NEXT STEP

Prepare a CMC taper, hub or custom-part enquiry

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

0 model records

No documented models yet.

Try broader requirements, or explore the manufacturer’s published product scope.

Explore manufacturers →

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Official actual company history and rangeCMC · company introduction ↗

    Founding date, taper/hub focus and advertised generations; ownership/capacity claims need current confirmation.

  2. Official actual material and construction detailCMC · single-row tapered bearing ↗

    GCr15, separable construction and mounted adjustment; no complete candidate specification.

  3. Official actual product descriptionCMC · double-row tapered bearing ↗

    Published general load/application description; exact arrangement and supplied setting require agreement.

  4. Official actual product detail, also read in browserCMC · automotive hub unit ↗

    Integration/sealing background; vehicle, flange and sensor compatibility not established.

  5. Official actual facility descriptionsCMC · production, inspection and hub testing ↗

    Heat treatment, grinding, clearance/torque measurement and test-machine types; not candidate test results or capacity allocation.

  6. Official actual custom alternativesCMC · made-to-requirement bearings ↗

    Outer-ring retaining-flange single/double tapers and sleeves; exact feasibility requires drawing review.

  7. Official actual component offerCMC · tapered rollers ↗

    Customer-specific roller design/manufacture; tolerances and performance not specified.

  8. Official actual engineering descriptionCMC · technical centre ↗

    CAD/CAE and test-facility claims; quote-specific design/validation deliverables need agreement.

  9. Primary municipal disclosure dated 15 April 2026Yantai market regulator · 2025 product sampling results ↗

    Entries 267–268: two named sampled batches and legal entity; not universal product certification.

  10. Official actual dated certification milestonesCMC · quality-system history ↗

    Historic IATF/ISO claims; current certificate, site and validity not established.

  11. Primary local-government publication dated 19 June 2023Yantai development zone · company recruitment information ↗

    Dated company ownership/history and work location; recruiting contact is not the sales route.

  12. Official actual contact pageCMC · dedicated contact ↗

    Sales phone, email and Changjiang181 address; no enquiry submitted.

Report a source correction → · Return to inquiry checklist ↑

CMC published product scope reviewed

The manufacturer website describes tapered roller and automotive hub bearings.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:33

Source documentation retained for editorial review.