BearingIndex
THE BEARINGINDEX DIRECTORY

CSC

CSC in Changshu publishes precision/application bearing supply, including 7602/7603 and BSB screw-support families. Confirm arrangement and actual production site, then connect the approved build, lot inspection and applicable site certificate before ordering.

CSC · SCREW SUPPORT AND TRACEABLE PRECISION SUPPLY

Approve the support arrangement and the lot that delivers it.

Suzhou CSC Precision Technology Co., Ltd. identifies itself at Suzhou Road 30, Changshu, and describes bearing manufacture plus application solutions. Its useful public evidence includes specific screw-support families, named manufacturing/measurement resources and a batch-traceability statement. These support a technical enquiry; the controlled arrangement and actual manufacturing location still belong in the order. Actual company identity and positioning [1]

Prepare a sourcing inquiry
01

7602, 7603 and BSB are enquiry routes, not complete orders.

The actual precision page describes single-direction angular-contact thrust bearings for ball screws, with 7602** and 7603** standard series and a separate BSB screw-specific series. It names engineering-plastic cages and open or sealed structures selected for customer conditions. Its high-load, stiffness, accuracy, acceleration and low-torque wording is a manufacturer capability description, not a numerical acceptance result. Actual 76/BSB product publication [2]

Public choiceInput needed for the quotationApproval to obtain
7602** / 7603** or BSBFull shaft/screw and housing drawings, existing designation, direction/reversal of axial loading and duty.Exact full model, envelope and interface tolerances, supplied arrangement and retention.
Open or sealedLubricant supply, contamination, speed/temperature profile and access for maintenance.Actual seal/grease or oil build, torque/heat acceptance and lubrication instructions.
Precision and axial stiffnessRequired positioning/running performance, load case, shaft/housing fits and clamping.Numerical tolerances, preload/arrangement and the measurement conditions for the agreed stiffness or running result.

Confirm whether one bearing, a paired/grouped set or an assembled support is supplied, with set identification and mounting instructions. Do not substitute from a nominal bore or a shortened series name. No current model-specific load, speed, stiffness, preload or service-life value is invented from this descriptive page.

The official site also routes enquiries to deep-groove, angular-contact, four-point, self-aligning and thrust families. Its company introduction names machine-tool, robotics and other applications; those application labels do not establish your exact machine fitment or aerospace/medical project approval. Actual positioning and application claims [1]

02

Turn the published traceability claim into an order-level evidence chain.

The production-environment page explicitly describes process control from order receipt through shipment and traceability for an individual product batch. It lists turning, heat treatment, grinding, assembly and warehousing, and names equipment including a HEMBRUG precision lathe, Lapmaster Wolters/G&N grinding resources and an Aichelin salt-bath furnace. These are the manufacturer’s published resources; they are not a site audit or proof that every order uses every listed machine. Actual manufacturing and batch-traceability description [3]

  1. Freeze the technical build

    Approve the drawing/revision, full designation, material/cage, seals/lubrication, precision and clearance/preload. For support sets, identify arrangement, pairing/marking and all supplied accessories.

  2. Link manufacturing to inspection

    Request the actual factory/process scope, material and heat-treatment traceability, lot identification and release plan. For critical interfaces, agree dimensional/geometric records and measurement conditions; include running torque, vibration or other functional checks only with defined methods and limits.

  3. Retain the approved reference through repeat supply

    Identify the approved sample/build, shipment lot and inspection documents. Agree approval for changes to plant, process, material, cage, grease or seal, and a containment/nonconformance route for related stock.

The quality page names dimensional, form, metallographic, chemical and lifetime-testing equipment from several suppliers. Ask which resource and calibrated method will release your actual characteristic, and request its lot-linked output. An instrument brand or laboratory image is not a passing batch result. Actual quality-resource description [4]

03

The 2026 approved project is separate from a confirmed supplying line.

The official contact page publishes Suzhou Road 30, Changshu High-tech Industrial Park. A Suzhou environmental notice dated 19 May 2026 separately identifies CSC’s new high-performance-bearing R&D/industrialization project east of Liuzhou Road and south of the planned Weiyi Road, Changfu, with a project figure of 20 million sets annually. A subsequent government announcement records approval 苏环建〔2026〕81第0135号 dated 26 May 2026. Actual project/site notice [5] Actual approval announcement [6] Current published contact address [8]

These records establish the described project and an environmental approval, not completed construction, commissioned lines, actual output, certificate coverage or an available delivery slot. Do not add the project figure to legacy output or assume your order is made there. Ask CSC to identify the actual manufacturing/inspection/shipping locations and any transfer/qualification plan.

The China Bearing Industry Association directory uses the current company name in its heading, but its introduction retains the older Changshu Changcheng Bearing name, legacy certification editions and historical resource figures. Use it as an industry identity/address cross-check, rather than adopting those figures as current capacity or the old certificate wording as present status. Actual association company record and legacy text [7]

04

Check the actual site certificate, then reach the right sales team.

The official quality page’s original IATF image was read in its browser lightbox. It names 苏州长城精工科技股份有限公司 at Suzhou Road 30, Changshu, with IATF number 0503459 and CASC number 2024A617, for design and manufacture of rolling bearings. The printed registration/expiry dates are 4 March 2024 / 3 March 2027. These are document fields; current issuer/oversight status was not independently established. Actual quality page and original IATF scan [4]

The same site describes ISO 9001, ISO 14001 and AS9100 management systems. Request the current original certificate, annex, issuing-body verification and coverage for the actual factory and proposed product. Do not extend the Suzhou Road IATF scan to a new project site, or turn a management-system statement into approval of every automotive/aerospace component.

Domestic enquiry

0512-52898449
[email protected]

International enquiry

0512-52872559
[email protected]

These are the official role-specific contacts. Send the controlled build, duty and requested evidence; confirm legal seller, production/shipping site, sample costs, quantity/MOQ, lead time and returns/change procedure directly. No live inventory, quotation or project delivery promise is asserted. Actual contact directory [8]

YOUR NEXT STEP

Prepare a CSC support-bearing and qualification brief

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

0 model records

No documented models yet.

Try broader requirements, or explore the manufacturer’s published product scope.

Explore manufacturers →

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Official company publication, browser readCSC · company introduction ↗

    Current company identity, precision/application positioning and management-system claims; no project qualification or current certified status inferred.

  2. Official product publicationCSC · actual 76/BSB screw-support series ↗

    7602/7603 and BSB, engineering-plastic cage and open/sealed choices; no missing numerical parameters supplied.

  3. Official process/resource descriptionCSC · production environment and batch traceability ↗

    Named resources, manufacturing stages and order-to-shipment batch traceability claim; not an audit or guaranteed process for every item.

  4. Official publication; original IATF image browser/lightbox readCSC · quality resources and original certificate gallery ↗

    Actual measurement resources and Suzhou Road IATF scan fields/dates; current issuer status and coverage of other sites not independently established.

  5. Primary government project noticeSuzhou environment bureau · proposed CSC project approval notice, 19 May 2026 ↗

    Named entity, separate project location and planned 20-million-set figure; no commissioning, available capacity or product approval inferred.

  6. Primary government approval listSuzhou environment bureau · CSC approval announcement, 1 June 2026 ↗

    Actual approval number/date for the described project; no acceptance, completed construction or current output inferred.

  7. Primary association-hosted company-submitted directoryChina Bearing Industry Association · CSC company record ↗

    Identity/address cross-check; older Changshu name, historical figures and legacy certificate wording retained as dated self-description.

  8. Official contact publicationCSC · official domestic and export contacts ↗

    Suzhou Road 30 and separate phone/email routes; actual contract site and commercial terms need direct confirmation.

Report a source correction → · Return to inquiry checklist ↑

No reviewed model or batch reports are available. Independent verification is not implied.