BearingIndex
THE BEARINGINDEX DIRECTORY

C&U

C&U publishes broad bearing and assembly supply plus regional engineering and testing support. Identify the actual supplied item and factory, then agree traceability, test methods and site-specific certification before accepting a batch.

C&U · TRACEABLE SUPPLY AND ENGINEERING ANALYSIS

Connect the bearing, the factory and the test evidence.

C&U’s accessible official regional sites publish ball and roller bearings alongside wheel-hub, water-pump/integral-shaft, slewing and CV-joint products. Those supplied items need different drawings and acceptance. The useful enquiry identifies the exact component or completed assembly, its manufacturing entity and the evidence needed to release the order. Actual official product families [1]

Prepare a sourcing inquiry
01

A loose bearing and a completed hub or pump item have different approval boundaries.

The Americas product page lists ball/roller families, wheel-hub bearings, integral-shaft/water-pump bearings, slewing bearings and CV joints. It also separates precision, hybrid ceramic, magnetic-clutch, mounted-unit and other categories. These actual routes support an enquiry; they do not establish a controlled part’s dimensions, automotive fitment or present availability. Actual category list [1]

Loose bearing or matched arrangement

Specify full model/suffix, drawing and tolerances, material, precision/clearance or preload, cage, seals and lubrication. Provide shaft/housing fits, load/speed/temperature and required installed performance.

Hub, integral shaft or pump-related item

Define the complete supplied components and interfaces, retention and assembly process. For a replacement, provide the exact original identifier and vehicle/equipment/assembly revision where applicable, then obtain confirmed fitment and a controlled drawing.

Slewing, mounted or special product

Supply the actual interface/load drawing, mounting support and fastener/retention requirements. Agree installation and completed-item acceptance rather than borrowing a small deep-groove inspection checklist.

Ask whether the quotation covers a loose bearing, subassembly or completed functional item, and who approves each design/interface. The broad catalogue’s size/range statements are manufacturer descriptions, not a guarantee that every variant is stocked or that every factory makes every family.

02

Specify the method and outcome before booking an engineering test.

The actual testing-capabilities page lists material/heat-treatment analysis, dimensions/shape, roundness/roughness/waviness/vibration, lubricant/rubber analysis and tests including fatigue, grease, high-speed/temperature, torque durability, slurry splash and seals. The engineering-support page more specifically describes Plymouth, Michigan incoming-product inspection and post-test teardown/visual analysis, with noise instruments, dimensional gauges and clearance/hardness resources. Group-level capabilities and a particular regional laboratory’s resources are different scopes. Actual broad testing offer [2] Actual Plymouth support resources [3]

Buyer problemEvidence to agreeBoundary to retain
Assembly noise or rough runningBearing/assembly identity, measurement speed/load, temperature, bands/method and numerical acceptance.Do not interchange instrument vibration-band results and sound-level readings.
Torque or heat after mountingFits, preload/clearance, clamping, grease/seal build and time/speed/load temperature profile.Compare loose and installed conditions with the same identified sample.
Seal or contamination failureExposure medium, temperature, cycle, leakage/ingress definition and post-test inspection.A test-bench description does not establish a waterproof or corrosion rating.
Endurance or material concernRepresentative build, duty, sample quantity, failure criterion and material/heat-treatment methods.A capability listing is not an actual lifetime result or accredited scope.

Agree the responsible laboratory/site, method/edition, calibration, report fields and whether accreditation is required for that exact test. Link the result to the drawing revision, bearing lot, lubrication and assembled interfaces. Do not invent a passing result or numerical limit from an equipment list.

03

The laboratory cover certificate requires its missing scope schedule.

The European download page provides an original two-page CNAS scan naming the C&U measuring and test center / 人本股份有限公司检测试验中心, registration CNAS L5285, at 1155 Shenzhou Road, Fengcheng, Fengxian, Shanghai. It states ISO/IEC 17025:2017, effective 28 October 2023 with printed expiry 27 October 2029. It explicitly says the accredited service scope is in the attached schedule, which forms part of the certificate. The examined two-page Chinese/English file does not include that schedule. Original laboratory scan [4]

Request the current CNAS record and complete L5285 scope schedule for the exact item, method and laboratory location. Current directory status and scope were not independently established in this review. Do not label every test in C&U’s capabilities page as accredited, or transfer the Shanghai center’s scope to the Plymouth laboratory.

The separate European-hosted IATF file names C&U Company Limited, No. 66 East Kuocang Road, Wenzhou, USI YG6WK2, registration 01 111 018652/04, IATF number 0514965, for design and manufacture of bearings and bearing parts. The scan states 6 May 2024 to 5 May 2027, with annexes identifying remote design/testing, sales and other support roles. These are the actual document fields, not a blanket certificate for every group plant or product. Obtain current issuer status and the actual manufacturing site’s applicable certificate/annex before approval. Original IATF scan and annex [5] Actual separate European certificate directory [6]

The CCCME directory independently identifies C&U Group and publishes its Wenzhou East Kuocang Road address. Its company introduction contains 2004 financials and legacy quality-system wording, so it is used as a company-identity/contact cross-check rather than current production, certificate or quality evidence. Actual trade-chamber company record [7]

04

Preserve the assembly evidence before asking for a failure analysis.

The Plymouth engineering-support offer specifically includes post-test teardown and visual analysis. An enquiry becomes more useful when it preserves the failed item’s context; cleaning, mixing parts or changing the assembly before recording it can remove information needed to compare installation, contamination, lubrication and damage. The following is a buyer preparation sequence, not a claimed diagnosis of any actual failure. Actual teardown/analysis service [3]

  1. Identify the parts and event

    Record bearing and assembly identifiers, lot/date, service hours, duty, failure symptoms and any maintenance or operating change. Photograph the installed orientation and condition where safe and preserve the mating parts.

  2. Agree handling before teardown

    Ask the responsible engineering team how to package/label the item and whether to retain lubricant, seals and debris. Keep each bearing’s rings/rolling elements with its identity; do not combine unrelated lots or assemblies.

  3. Define the analysis question

    Request a report distinguishing observations, measured findings, probable causes and further checks. Agree containment and disposition for related stock and installed units, and verify the proposed correction through the actual duty.

For new or repeat supply, retain approved sample/build, material/grease/seal choices, lot release and change approval. Ask the manufacturer to confirm the seller’s authorisation and the applicable authenticity/traceability procedure; packaging or a familiar logo alone does not establish origin or performance.

05

Route the enquiry to the team responsible for the actual item.

The accessible European contact page lists Genfstraße 1, 97424 Schweinfurt, phone +49 9721 298330 and [email protected], with a second Limburg location. The Americas engineering-support page has an explicit engineering selection for technical requests. Confirm the actual engineering owner, legal seller, manufacturing plant, shipping origin and returns/nonconformance route in writing. Actual Europe contact [8] Actual Americas engineering route [3]

The main cugroup.com/en.cugroup.com routes refused connection during this review, so accessible official regional pages and their original documents are used here. No live main-site stock, authenticity-query result, quotation, MOQ, capacity reservation or delivery promise is asserted. Request current sample/tooling costs, quantity and lead time for the fully defined item.

YOUR NEXT STEP

Prepare a C&U supply or engineering-analysis brief

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

0 model records

No documented models yet.

Try broader requirements, or explore the manufacturer’s published product scope.

Explore manufacturers →

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Official regional product publicationC&U Americas · actual products and assemblies ↗

    Actual bearing and hub/shaft/pump/CV/slewing categories; no exact fitment, current stock or uniform factory capability inferred.

  2. Official regional capability descriptionC&U Americas · bearing-testing capabilities ↗

    Analysis and test menu; no actual completed result, numerical acceptance or universal accredited scope inferred.

  3. Official regional page, browser readC&U Americas · actual Plymouth engineering support ↗

    Incoming inspection, post-test teardown/visual analysis, named noise/dimensional/clearance resources and engineering contact selection; Shanghai accreditation not transferred.

  4. Original accreditation scan hosted by official Europe site, rendered/readC&U · original CNAS L5285 cover scan ↗

    Named Shanghai center, ISO/IEC17025:2017, dates and scope-schedule requirement; two-page file lacks schedule and current CNAS directory/scope status not established.

  5. Original issuer scan hosted on official Europe site, rendered/readC&U · original IATF certificate and remote-support annex ↗

    Named Wenzhou holder/site, USI and certificate numbers, 2024–2027 printed dates and remote roles; no universal plant coverage/current issuer status inferred.

  6. Official directory, browser readC&U Europe · actual certificate and literature directory ↗

    Separately labelled Europe ISO, group/laboratory and Wuhu IRIS documents; directory headings do not establish current site-specific approval.

  7. Primary trade-chamber directoryCCCME · C&U Group company record ↗

    Company identity and Wenzhou address cross-check; dated financials, legacy certificate wording and promotional quality claims not treated as current evidence.

  8. Official regional contact publicationC&U Europe · actual contact locations ↗

    Schweinfurt/Limburg route, phone and email; actual seller/plant/engineering responsibility and delivery need direct confirmation.

Report a source correction → · Return to inquiry checklist ↑

Product scope reviewed reviewed

The official website lists ball and roller bearing product categories.

Scope: Product scope only. No material report, model specification, certification validity or factory audit was reviewed.

Company-level record; not a model test report · 2026-09-21 00:00:00

Source documentation retained for editorial review.