BearingIndex
THE BEARINGINDEX DIRECTORY

Dongfang Sliding

Dongfang Sliding: planar metal thrust washers, hydraulic side/port plates and drawing-led friction components.

DONGFANG · THRUST WASHERS · PUMP PLATES

Specify the working surface, material build and mating assembly.

Hangzhou Lin’an Dongfang Sliding Bearing (杭州临安东方滑动轴承有限公司) describes a planar precision metal sliding-bearing focus and a1982 company history. Its public catalogue separates crankshaft thrust washers, hydraulic side/port plates and custom friction components. These are surface-and-interface enquiries: a familiar engine or pump name alone does not settle thickness, material layers, oil passages or assembled clearance. Exact company and product focus [1]

Prepare a sourcing inquiry
01

Select a component role before asking for a replacement.

Actual published routeWhat it establishesFirst engineering input
Crankshaft thrust washersVehicle/engine-labelled entries including BYD473, Geely4G18, JAC4GA and CheryE4G16.Actual engine/crankcase revision and controlled washer drawing; thickness class, working face, locating features and assembled endplay.
Hydraulic side / port platesGear, vane and piston-pump categories; A10V and A10V(coated),VQ and other pump-labelled entries.Exact pump/plate role and revision, mating geometry, port layout, surface/flatness and clearances; operating pressure/speed/fluid/temperature.
Custom thrust / friction componentsAir-compressor thrust bearings, refrigeration thrust rings, gap-adjusting rings, turbocharger/timing/transmission and loader washer routes.Actual component drawing, load/sliding duty, material/layers and lubricant/environment; dimensions alone do not define an equivalent working surface.

These are catalogue roles and buyer-preparation recommendations, not verified vehicle fitment, complete pump supply or component load ratings. The custom listing does not establish medical, aviation or other system approval despite the broad industries named in company text. Published engine-labelled detail [2] Actual hydraulic categories [3] Actual custom catalogue [4]

02

Repeated pump prose is not a specification for three different parts.

Use the actual title as a lead, then ask for controlled evidence.

The reviewed BYD473 washer, A10V piston-pump-plate and refrigeration-thrust-ring details all repeat the same internal-gear-pump explanation. That text does not describe each named component’s material, dimensions, operating limits or confirmed fitment. Do not use it to infer that a thrust washer is a pump or that an A10V part has the mechanism described in the generic prose. BYD473 actual page [2] A10V actual page [5] Refrigeration-ring actual page [6]

Request the exact manufacturer part reference and controlled drawing, with dimension units, revision, mating-part/engine/pump variant and accepted material/BOM. Compare the supplied sample with that document. Product images and a title do not establish thickness tolerances, pressure capability, oil compatibility, current stock or an approved OEM relationship.

The public HTTP documents were readable on 8 October 2026, while browser visits were redirected into a domain-certificate error. This is an access limitation; it does not negate the catalogue, but current quotations and files need direct confirmation. The repeated explanatory text was actually inspected, not assumed from a blank page.

03

A10V and A10V(coated) need separate material and surface approval.

The supplier publishes separate A10V and A10V(coated) entries under the piston-pump port-plate category. The reviewed coated page does not give an order-specific coating composition, thickness, adhesion criterion or temperature/fluid limit. Obtain those values from the controlled offer rather than assuming the coated variant is interchangeable or universally longer-lasting. A10V route [5] Actual coated A10V route [7]

Plate geometry and fluid duty

Provide exact mating interfaces, ports and locating features, working-face flatness/finish and assembled clearance. Identify the fluid, pressure/speed and startup/thermal duty. Agree how dimensional, leakage and installed functional results will be measured for this plate revision.

Material and working layer

Specify the base material, bearing layer, any coating and which face it covers. Ask for chemistry/hardness, layer/thickness and bond/adhesion acceptance as applicable, with lot traceability and permitted changes. A photograph does not establish the layer stack or test result.

For crankshaft or custom thrust pieces, separately define the loaded/sliding face, thickness/endplay class, oil grooves and locating/orientation features. Retain the same approved material and working-face revision through sample and repeat supply. These are buyer approval questions, not additional material capabilities assigned to Dongfang.

04

Use standards experience to frame a diagnosis, not to predetermine its cause.

The manufacturer’s 15 May 2013 article describes its work on thrust-washer failure terminology and appearance/cause classification. The national standards platform independently lists Lin’an Dongfang Sliding Bearing Co.,Ltd. among drafting units for plan 20081601-T-604, marked published as GB/T27938-2011. The record supports historical standards involvement; it does not prove the cause of an individual failed part or guarantee an in-house failure-analysis service. Dated company article [8] Actual standards-platform record [9]

  1. Preserve the evidence: retain the failed part, its lot/drawing and counterpart, orientation, photographs and operating/lubrication/assembly history. Agree how to examine the working surface before cleaning or destructive testing.
  2. Separate observations from causes: ask for recorded wear/damage, dimensional/material/layer findings and the evidence supporting each proposed cause. Do not label every worn washer as a material defect or assume an assembly/lubrication explanation without evidence.
  3. Close the manufacturing loop: request incoming material/layer records, working-face/thickness/flatness inspections and lot-linked release data for the offered revision. Agree corrective action and how the changed sample/assembly will be requalified.

A separate national plan,20254030-T-604, lists the current Hangzhou Lin’an company name among drafting units for sliding-bearing statistical process control. It was issued 6 August 2025 and shown under approval when read on 8 October 2026. That is a standards-plan role, not proof of achieved Cpk, a released new standard or acceptable process capability for your thickness/flatness/coating characteristics. Ask for the actual measured characteristics, sampling and capability evidence. Actual current SPC plan [10]

05

Confirm the offered entity, current system and sales route.

The company description states ISO/TS16949, and the honours page labels an ISO/TS16949 image. The original image could not be read in this review because its image host returned 403. No current issuer status, certificate number/expiry or covered-site scope was established; obtain a current required certificate/annex and issuer record rather than presenting the old website wording as verified automotive certification. Industry awards, safety and brand honours answer different questions. Company system wording [1] Honours publication [11]

The contact page names Hangzhou Lin’an Dongfang Sliding Bearing at 207 Taiyang Street, Taiyang Town, email [email protected]. Its switchboard is 0571-63831188; dedicated marketing numbers are 0571-63831388 and 0571-63831777. Confirm the exact contracting/manufacturing entity and site, authorised engineering/sales contact and responsibility for the component design and assembly qualification. Actual contacts and marketing route [12]

Approve a sample against its drawing/material/working-layer revision and agreed inspection and installed duty. Obtain sample/tooling costs, quantities/MOQ, current manufacturing slot, delivery and nonconformance handling directly. For repeat orders, require notification of material/layer suppliers, coating/process/tool/site changes and define the inspection or installed requalification needed.

YOUR NEXT STEP

Prepare a Dongfang thrust-washer or pump-plate brief

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

0 model records

No documented models yet.

Try broader requirements, or explore the manufacturer’s published product scope.

Explore manufacturers →

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Manufacturer publication, public HTTP readDongfang · exact company and planar-bearing focus ↗

    1982 history, planar metal focus and ISO/TS wording; broad industry and customer claims are not independent qualification.

  2. Manufacturer catalogue lead, actual text readDongfang · BYD473 actual detail ↗

    Engine title and category; repeated internal gear pump prose does not establish washer specifications or OEM approval.

  3. Manufacturer category publicationDongfang · side/port-plate catalogue ↗

    Gear, vane and piston pump plates, including A10V, coated A10V and VQ routes; complete pump ratings are not established.

  4. Manufacturer category publicationDongfang · custom friction-component catalogue ↗

    Ring, washer and thrust application routes; controlled materials, loads and approvals require confirmation.

  5. Manufacturer product lead, text checkedDongfang · A10V actual detail ↗

    Piston pump plate category; repeated generic gear pump text does not define this part.

  6. Manufacturer product lead, text checkedDongfang · refrigeration thrust-ring detail ↗

    Custom ring title with the same generic prose; dimensions, fluid compatibility and material are not established.

  7. Manufacturer variant publicationDongfang · A10V coated detail ↗

    Separate coated title; controlled coating composition, thickness, adhesion and duty ratings are not given.

  8. Dated manufacturer articleDongfang ·2013 failure-standard article ↗

    Standards work described on 15 May 2013; this is not an individual failure diagnosis or a service guarantee.

  9. Primary standards platform, actually readSAMR · thrust-washer failure-standard record ↗

    Historical Lin’an company name listed as a drafting unit for plan 20081601-T-604, published as GB/T 27938-2011; this is not bearing certification.

  10. Primary standards platform, actually readSAMR · sliding-bearing SPC revision plan ↗

    Plan 20254030-T-604 lists the current company name. Issued 6 August 2025 and under approval on 8 October 2026; no order Cpk or performance is inferred.

  11. Manufacturer publication, image access limitedDongfang · honours and system-image label ↗

    ISO/TS image label read; the original image host returned 403. Current certificate details and status were not established.

  12. Manufacturer public contact documentDongfang · exact contact and marketing numbers ↗

    207 Taiyang Street; switchboard 0571-63831188; marketing 0571-63831388 and 0571-63831777; published email. Confirm authorisation and commercial terms.

Report a source correction → · Return to inquiry checklist ↑

Dongfang Sliding published product scope reviewed

The manufacturer website describes engine sliding bearings and thrust washers.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:34

Source documentation retained for editorial review.