BearingIndex
THE BEARINGINDEX DIRECTORY

Fenglian

Fenglian publishes thrust-ball bearing families including D(B), cage-free TTC, double-direction, miniature and covered designs through its supplier-managed HiSupplier showroom. Its older tables contain duplicated designations and unresolved dimensional entries. Confirm the load direction, supplied washers and assembly arrangement against a current drawing before considering replacement.

THRUST BEARINGS · DRAWING BEFORE REPLACEMENT

Choose the thrust arrangement. Then resolve the catalogue row.

Xinchang Fenglian Bearing Co., Ltd. (新昌县丰联轴承有限公司) describes a focus on flat thrust-ball and non-standard bearings. Its supplier-managed showroom lists D(B), TTC without a cage, miniature, double-direction and covered families. The dedicated domain could not be read as a working factory website during this review: HTTPS showed a certificate-name error and its public HTTP address showed a domain-invalid notice. The accessible showroom is manufacturer-supplied evidence, not an independent factory audit. Actual supplier-managed introduction [1]

Prepare a sourcing inquiry
01

Describe the complete axial support, rather than just “a flat bearing”.

A family name is a starting point

Fenglian names cleaning-machine, automotive/tractor clutch, elevator and jack applications in its introduction. These are its advertised application groups; they do not establish approval for your machine, vehicle or safety-related assembly. Its navigation separates miniature, D(B), cage-free TTC, double-direction, inch and covered thrust bearings. Actual company scope and family navigation [1]

For your enquiry, identify where the axial force enters and leaves the assembly, whether it reverses, the available axial height and the shaft/housing mounting surfaces. Ask the supplier to nominate the actual construction and drawing for those conditions.

Define what arrives in the box

  • D(B) or inch-style replacement: specify the old full designation and measured mating envelope; do not infer interchangeability from a similar number.
  • TTC without a cage: request the rolling-element and washer arrangement, handling/assembly instructions and the permitted duty for the proposed design.
  • Double-direction or covered design: confirm the component set, installed height, restraint and mounting orientation. A cover title alone does not establish a seal specification.
  • Miniature or custom part: provide a controlled drawing and explain the critical interfaces; a photograph or sample is a reference, not the final tolerance agreement.

These are BearingIndex preparation questions based on the published families. They are not claims that Fenglian has validated a particular load, speed, interchange or service life. The technical index is dated August 2017; request the current version for the chosen product. Actual dated parameter index and D(B) table [2]

02

The TTC table cannot uniquely identify every part by designation.

The actual cage-free parameter page is dated 26 August 2017. It prints two rows named T1380 with different outside/height values, and two rows named T1930 with different dimensional sets. The D(B) page is dated 31 August 2017 and labels its dimensions d/D/H; the TTC page uses d/D/T. Neither readable table states a dimensional unit. Actual TTC table [3] Actual D(B) table [2]

Actual published issueWhy it matters for this enquiryAsk for this resolution
T1380 appears with d/D/T entries 35.179 / 59.4 / 15.875 and 35.179 / 66.675 / 19.446.The printed name does not select one outer envelope or height. No units or revision resolution are supplied in the readable table.The exact current designation, dimensioned drawing and explanation of which row applies to your mounting envelope.
T163 prints the d entry as “41529”.It is unresolved source data. Adding a decimal would be an editorial guess.A corrected, approved drawing/table issued by the supplier, with explicit units and tolerances.
T1930 has two different dimensional sets; D(B) and TTC use different height headings.A designation or a copied height column alone is insufficient to approve a replacement.Identify the full assembly, drawing revision, measurement datums and installed height.

The numbers above document source ambiguity; they are not approved specifications. Do not turn the showroom table into a purchase specification or silently repair its fields. A current drawing should also define washer interfaces, materials, accuracy, permissible load/speed and lubrication conditions for the candidate part.

What about the double-direction parameter page?

The accessible 14 August 2017 page contains its parameter graphic, but no dimensional table in the extracted text. Do not transfer TTC or D(B) figures into a double-direction bearing. Request that family’s actual drawing and complete supplied component set. Actual double-direction parameter publication [4]

03

Custom manufacture needs a signed drawing and a specific acceptance route.

The D(B) and TTC publications state that non-standard bearings can be designed/manufactured to user requirements. That is a supplier offer to discuss a design, not evidence that your part has already been developed or tested. The introduction also claims an ISO9000 quality system without a current certificate number, issuer, validity period or covered site in the accessible text. Actual custom-part statement [2] Actual TTC publication [3] Quality-system self-description [1]

  1. Resolve the design. Agree the full designation, drawing revision, units, components included and the dimensional acceptance limits. Explain axial load direction/reversals, speed, temperature, lubrication and the mating support surfaces.
  2. Define the sample test. Separate dimensional checks from performance checks in your actual assembly. Agree how installed height, axial behaviour and any noise/temperature requirement will be measured, under what load/speed and with which acceptance limit.
  3. Link production to the approved sample. Record material/lot identity, the approved process/site, inspection scope and treatment of design or source changes. Ask for the actual relevant certificate original and issuer-status route if your procurement requires certification.

Ask separately about sample charges, tooling ownership, MOQ, lead time, packaging and preservation of the supplied washer/rolling-element set. None was independently confirmed for a current order. Do not approve a jack, elevator or clutch application solely from the application words in the company introduction.

04

The showroom’s contact address and old identity record serve different purposes.

Use the dedicated contact as a lead

The actual contact page names Zhang Jun (张军), telephone +86 575 86170168, mobile +86 13806746161, and Building 4, Nos. 111–121, No. 2 Jiangdong Road, Chengtan Subdistrict, Xinchang. Confirm the current engineering contact and the production/delivery address before sending samples. No enquiry was sent during this review. Actual supplier-managed contact [5]

Do not treat an old identity panel as current registration

The platform identity page lists the same Chinese company name and a Houshangen Village, Meizhu address. Its displayed business term ends 9 October 2023 and no current annual-review date is supplied. This is an old platform record: it neither proves current registration status nor proves that the business has ceased. Obtain the current business licence and confirm the legal seller, invoicing entity and manufacturing site. Actual dated platform identity fields [6]

A government-hosted electricity-user PDF separately contains the Chinese company name, including PDF page 124, row 324, under Chengtan. This is a narrow external name record. It does not verify today’s contact address, manufacturing capability, product quality or current certification; the electricity figures are not converted into bearing capacity. Actual government-hosted electricity-user attachment [7]

The dedicated domain’s current access failure and the age of the available technical/identity records make direct confirmation particularly important. Keep the old table, the supplier’s corrected drawing and your final order revision together, so an unresolved historical row cannot re-enter the purchase later.

YOUR NEXT STEP

Prepare a Fenglian thrust-arrangement and drawing brief

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

0 model records

No documented models yet.

Try broader requirements, or explore the manufacturer’s published product scope.

Explore manufacturers →

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Supplier-managed platform publicationFenglian · actual manufacturer-managed company introduction ↗

    Company’s own thrust/custom scope, application groups and undated ISO9000 claim; not independent audit/current certificate.

  2. Supplier-managed original technical textFenglian · D(B) parameter publication, 31 August 2017 ↗

    D(B) headings and custom-manufacture statement; explicit dimensional unit/current revision not established.

  3. Supplier-managed original table, actual browser readFenglian · cage-free TTC table, 26 August 2017 ↗

    Duplicated T1380/T1930 and printed T163 field; no silent numerical correction or approved specification.

  4. Supplier-managed graphic publicationFenglian · double-direction parameter page, 14 August 2017 ↗

    Actual page/graphic presence; no readable dimensional text used or figures imported from another family.

  5. Actual supplier-managed contactFenglian · dedicated platform contact ↗

    Zhang Jun, published phones and Jiangdong address; present roles require direct confirmation.

  6. Historical platform identity recordHiSupplier · Fenglian identity panel ↗

    Chinese name, old address and business term ending 2023; not current official registry or cessation finding.

  7. Original government-hosted PDF, actual text readGovernment-hosted · electricity-user attachment ↗

    239-page electricity-user attachment, company-name occurrence on PDF page124 row324; no current qualification, address or bearing output inference.

Report a source correction → · Return to inquiry checklist ↑

No reviewed model or batch reports are available. Independent verification is not implied.