BearingIndex
THE BEARINGINDEX DIRECTORY

FSB

FSB / Fujian Fushan focuses on mounted insert-bearing units and spherical plain bearings, with application-specific fan and sealing packages. Its F1, FA and FC descriptions separate grease, clearance, sealing and housing choices. Select the whole unit for actual speed, contamination and mounting duty, then confirm model-specific evidence and maintenance.

FSB · MOUNTED UNITS FOR FANS AND CONTAMINATED DUTY

Choose the bearing, housing and maintenance package together.

Fujian Fushan Bearing Co., Ltd. (福建福山轴承有限公司) describes mounted insert-bearing units and spherical plain bearings, with standard and customised application packages. Its website goes beyond housing families to distinguish fan duty, sealing and lubrication. Use those distinctions to prepare a complete unit enquiry, then validate the exact model in the intended machine. Official company scope [1]

Prepare a sourcing inquiry
01

F1, FA and FC are different specification conversations.

Published packageDetails in the application pageBuyer action
F1 ordinary fanSpecific fan clearance, L02 grease, R8 seal, anti-loosening set screws and JH7 insert/housing fit.Obtain the full bearing/unit drawing and permissible speed, noise and temperature conditions.
FA commercial fanThe same named grease/seal/fit choices, with reinforced housing and a described refined-steel insert material.Confirm the exact housing, material evidence and what changes from the F1 offer.
FC fire fanA separate high-temperature grease code L15, specific clearance and supplier test/temperature claims.Request applicable test reports and conditions for the exact unit, plus the machine maker’s required system approval.

These are the supplier’s own application descriptions, not independent verification of a duty envelope. Do not combine FC high-temperature claims with ordinary-fan life claims or assume that a bearing description certifies a complete fire/smoke-control fan. Have the responsible machine engineering team approve the exact configuration and required qualification evidence. Actual F1 / FA / FC page [2]

The catalogue includes an actual UCP209-F1 detail, but the reviewed text does not provide a controlled dimensional/performance table for that unit. Request its current drawing and complete insert/housing designation; do not fill missing values from another brand’s UCP209. Actual unit detail [3]

For a fan enquiry, state shaft size and tolerance, belt or impeller loads, speed, continuous/standby operation, vibration, ambient and bearing temperatures, access for lubrication and noise acceptance. Agree grease fill, clearance, locking method and installed temperature/vibration checks before series supply.

02

Choose contamination protection without losing the required speed or shaft access.

The actual sealing page describes R3 triple sealing as suitable for medium- and low-speed harsh environments. It separately describes other special-seal performance claims. Do not apply one option’s speed claim or life multiplier to every seal package. Request the selected suffix, seal material, torque, permissible duty and test conditions. Actual seal descriptions [4]

Dust, mud or crop debris

Describe particles, splash direction, washdown and exposure duration. Confirm protection against mechanical damage to seals, grease compatibility and the inspection/replenishment plan. A “waterproof” heading alone is not an immersion or washdown rating.

Covered housing

The page distinguishes TTC through covers and TEC covers closed at one end. Release actual shaft projection, through-shaft or closed-end geometry, service access and cover/shaft clearances. Confirm which covers, gaskets and fasteners are included.

The supplier publishes relative-life improvements for sealing and cover options. Treat those as claims to substantiate with the compared configurations, duty and test report, not a promised service life for a different machine. Agree a practical pilot inspection for contamination ingress, grease condition and temperature under the buyer’s actual duty.

03

Set the locking method and replenishment plan for the exact unit.

FSB’s installation instructions separately identify set-screw units, eccentric-collar units and adapter-sleeve units. They call for checking base rigidity, flatness and shaft tolerance, and provide separate housing-bolt and set-screw torque tables. Use the correct instructions for the actual lock and fasteners; a torque for a mounting bolt is not a torque for the shaft-locking screw. Actual installation instructions [5]

  1. Release the shaft and mounting drawing. Confirm unit height, mounting-hole/slot layout, housing material and shaft-fit requirements.
  2. Approve locking and rotation. Agree the model-specific collar, screws or sleeve, assembly sequence and torque instructions; check the assembled shaft rotates normally.
  3. Record the maintenance duty. Define actual temperature and contamination, grease type, fill/replenishment quantities and service access.
  4. Inspect before replacing only the insert. Check the housing’s condition and confirm the approved spherical seat, fit, seal and lubrication interface for the replacement.

The maintenance page provides replenishment intervals by temperature and cleanliness, and quantities by diameter/bore series. These are conditional recommendations. “Maintenance-free” navigation does not mean every FSB unit requires no attention, and a general interval table is not an agreed interval for every special fan or seal package. Ask for the selected configuration’s instructions and retain the correct grease specification. Actual maintenance tables [6]

04

Use the standards record for scope, then ask for the selected unit’s proof.

The national standards platform names Fujian Fushan among the drafting organisations for GB/T 3882-2017, covering boundary dimensions of insert bearings and eccentric collars. Its actual record marks the standard current and records a 2023 review. Participation is relevant company evidence, but it is not certification of an offered unit’s material, noise, sealing, durability or fire-fan performance. Actual national standards record [7]

The company describes quality systems and development activity. Obtain the current certificate entity, site, scope and validity, and the actual manufacturing route and lot-linked inspection evidence for your order. For the fan/seal claims, request the applicable report, tested configuration and test conditions, and agree any buyer-specific sample or programme qualification. Supplier quality descriptions [1]

The official contact gives Fushan Industrial Area, Xiamei Town, Nan’an, Fujian, 0595-86760022 and [email protected]; 86750000 / 86357006 are labelled fax. Confirm the precise audit/receiving location, legal contracting entity and responsible application engineer. Actual contact [8]

Ask for an itemised offer covering full unit/insert/housing scope, lock, covers and grease, sample approval, quantities, serial lead time, packing, delivery terms and claims procedure. Keep the approved drawing and maintenance/qualification package with the order so repeat batches preserve the selected application configuration.

YOUR NEXT STEP

Prepare an FSB application-unit enquiry

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

0 model records

No documented models yet.

Try broader requirements, or explore the manufacturer’s published product scope.

Explore manufacturers →

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Official actual company pageFSB · company introduction ↗

    Mounted-unit/plain-bearing range and quality/development descriptions; current certificate evidence not independently established.

  2. Official actual application descriptionsFSB · high-speed/low-noise application ↗

    F1/FA/FC grease, seal, fit and supplier test/life claims; no complete-fan or independently verified duty approval.

  3. Official detail actually read and browser viewedFSB · UCP209-F1 ↗

    Named unit listing; controlled dimensional/performance table to obtain rather than borrowing other-brand values.

  4. Official actual sealing descriptionsFSB · sealing application ↗

    R3 medium/low-speed context and TTC/TEC cover distinction; multipliers are supplier claims, not installed-life guarantees.

  5. Official actual installation tablesFSB · installation ↗

    Separate lock forms, shaft-fit and housing/set-screw torque guidance; selected configuration instructions required.

  6. Official actual conditional maintenance tablesFSB · maintenance ↗

    Grease intervals/quantities and insert replacement; not universal maintenance-free operation or unconditional interchange.

  7. Actual authoritative standards recordNational standards platform · GB/T 3882-2017 ↗

    Fushan drafting participation and current insert/collar boundary-dimension standard; no product performance certification.

  8. Official actual contactFSB · contact ↗

    Xiamei Fushan Industrial Area, 86760022, email and separately labelled fax routes.

Report a source correction → · Return to inquiry checklist ↑

FSB published product scope reviewed

The manufacturer website describes housed insert bearings and spherical plain bearings.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:33

Source documentation retained for editorial review.