The radial-clearance page discusses fit-related reduction and refers to historic standards and roller-bearing examples. Those examples do not establish the axial clearance of a servo ball bearing. Agree unmounted radial clearance, installed operating clearance and axial movement separately, using the correct bearing type, measurement load, fit and thermal conditions. Actual generic radial-clearance guidance [4]
The vibration page presents one dB table and another frequency-band table in μm/s, while using acceleration wording. Do not combine these into one “noise grade” or infer an installed motor sound-pressure result. Request the correct measured quantity, units, current standard/edition, speed/load, fixture, frequency bands and calibrated method for the candidate. Retain the actual lot report and validate the machine-level result separately. Actual vibration tables and labels [5]
The tolerance page describes P0/P6 and separate dimensional/runout quantities. Accuracy, clearance and vibration are separate specifications: provide the required bore/outside-diameter/width tolerances, runout and mounting geometry in addition to the noise/torque targets. A claimed low-noise grade does not supply dimensional accuracy or alignment performance. Actual tolerance reference page [6]
Agree representative samples and hot/cold startup, running and reversing measurements in the actual motor. If proposing an import replacement, compare the complete incumbent construction and validation conditions, not only the base model or envelope.