BearingIndex
THE BEARINGINDEX DIRECTORY

Hejia

Hejia: miniature metric/inch, thin and flanged bearings plus normal/B/H spindle series, with a guide to closure-dependent envelopes and spindle replacement evidence.

HEJIA · MINIATURE & SPINDLE BEARING ROUTES

Select an envelope. Then qualify the exact variant and spindle arrangement.

Ningbo Hejia’s company page describes small motor bearings, inch and nonstandard bearings, angular-contact bearings and several other product families. Company publication [1] Its public tables offer two distinct sourcing routes: miniature envelope/closure matching and a separate spindle-bearing construction/arrangement review.

Prepare a sourcing inquiry
01

Open, shielded and sealed options may require different width checks.

The metric and inch tables separate open, shielded and sealed designations and use both B and B1 width fields. The thin table covers MR, 68 and 69 references; the flange table adds D1/D2 and C1/C2. Metric [2] Inch [3] Thin [4] Flange [5] Choose the complete variant and check its drawing, rather than assuming that a base designation defines every closure’s axial envelope.

Actual catalogue routeWhat to resolve with HejiaWhy it matters to your drawing
MR63 / MR63ZZ and 686 variantsThe applicable B or B1 field for the chosen construction, complete closure and tolerances.The axial seat/retention space must match the supplied part.
R2-5 / R2-5ZZ and the inch R-seriesUnit-labelled drawing, fits and full closure designation. The numeric dimension columns are not explicitly unit-labelled in the reviewed table text.An inch-family name does not make every number in its table an inch measurement.
F684 / F684ZZ; MF105 / MF105ZZWhich D1/D2 and C1/C2 dimensions apply, flange side/orientation and the matching housing shoulder.Bore/outside diameter alone do not define flange seating and axial location.

Request ring/ball/cage material, lubricant/fill, clearance and dimensional acceptance for the actual build. The flange and miniature tables are reference routes, not evidence of current stock or that every displayed closure combination is available. [2] [5]

02

Do not choose between the two published 688 load ratings yourself.

Hejia’s metric table lists 688 with Cr/Cor values of 1260/590 under a rated-load (N) heading, while its thin table lists 1605/715 for 688. [2] [4] No difference in internal construction sufficient to reconcile those ratings was established from the reviewed entries. Ask for the exact offered variant, current rating method and controlled data sheet; this page does not select a preferred value or average them.

Other entries show questionable speed/designation strings, including a 693 oil-speed value of 670000, F624 oil-speed value of 480000 and “6804-3RS”. [2] [5] [4] They are reasons to verify the source sheet, not values to silently correct into a supposedly validated catalogue. No speed limit from those entries is used here as a design recommendation.

03

Normal, B and H are separate construction inquiries.

Normal spindle series

The first angular-contact page lists 708, 71800, 71900 and 7000-series references. Its two rating groups both carry a 15° heading in the reviewed text. [6] Ask the supplier to define the actual contact angle and which rating/speed columns belong to the offered construction. The duplicate heading is not resolved here by inventing a second angle.

B spindle series

The second page lists B7000C through B7010C and /HQ1 variants, with separately published speed values. [7] Obtain the complete meaning of /HQ1, actual rolling-element/cage materials, precision and lubricant requirements. No ceramic-ball construction or speed capability is inferred solely from that suffix. Confirm discrepancies such as the B700C/HQ1 string on the first row.

H spindle series

The third page lists long designations such as H7000C.T.P4A.2RZ, an FAG comparison column and a preload (N) group. [8] Treat the FAG reference as Hejia’s comparison, not approval by that brand or proof of interchangeable preload, rigidity, runout, lubrication or thermal behaviour.

Prepare a spindle replacement dossier

Supply the original complete designation/drawing, number and orientation of bearings, load/speed duty, fits and axial locating scheme. Ask Hejia for the proposed full designation, contact angle, matched-set arrangement where required, preload definition and measurement conditions, precision/inspection report, lubrication and mounting requirements. Agree controlled sample acceptance with the responsible spindle engineer before replacing an existing arrangement. The public H-series table alone does not specify a delivered matched set or release an installed spindle speed.

04

The dated entity record is useful; current process evidence is still required.

The company page gives No. 1388 Zhenluo East Road, Zhenhai, Ningbo. [1] A government-hosted 2024 technology-based SME list records 宁波合佳轴承有限公司 as entry 1,030, number 2024330211A8006334. [9] It confirms dated listing context, not current bearing certification, address inspection or product performance.

The official home page announces ISO 9001:2008 certification. [10] The process, testing and certificate pages did not yield complete readable evidence during this review. This is an access/evidence gap, not proof that the factory lacks those facilities. Obtain the current certificate with issuer/site/scope, a process and inspection plan for your offered bearing, calibrated equipment records and traceable lot results. Broad claims about quiet running, long life or application sectors on the company page do not establish numerical acceptance for your order. [1]

Source access: the browser returned HTTP 403 and an HTTPS certificate warning. Public HTTP company/product pages were readable through a normal text request without bypassing HTTPS validation. Their revision dates were not established; use a current supplier-issued specification for purchasing. Current price, MOQ, stock and lead time were not verified.

YOUR NEXT STEP

Prepare a Hejia miniature or spindle request.

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

0 model records

No documented models yet.

Try broader requirements, or explore the manufacturer’s published product scope.

Explore manufacturers →

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Manufacturer publicationHejia · company introduction ↗

    Product positioning and Zhenluo East Road address; numerical performance and current operations not independently audited.

  2. Manufacturer catalogue tableHejia · metric miniature table ↗

    Open/shielded/sealed and B/B1 fields; 688 rating conflict and questionable entries not corrected.

  3. Manufacturer catalogue tableHejia · inch-family table ↗

    R references and width fields; explicit dimensional units/current fit data require confirmation.

  4. Manufacturer catalogue tableHejia · MR/68/69 thin-series table ↗

    Named variants and differing 688 ratings; not current stock or universal suffix availability.

  5. Manufacturer catalogue tableHejia · flanged miniature table ↗

    F/MF references and multiple flange/width fields; drawing mapping and questionable speed values need confirmation.

  6. Manufacturer catalogue tableHejia · normal spindle series ↗

    Actual series references and duplicate angle headings; complete construction/conditions not inferred.

  7. Manufacturer catalogue tableHejia · B spindle series ↗

    B and /HQ1 variants; suffix materials, precision and disputed strings not inferred.

  8. Manufacturer catalogue tableHejia · H spindle series ↗

    Long designations, FAG comparison and preload columns; not third-party approval or installed spindle qualification.

  9. Historical government entity recordZhejiang · 2024 third-batch technology-based SME list ↗

    Exact name and entry 1,030, confirmed in the original PDF; not bearing certification.

  10. Manufacturer publicationHejia · official homepage ↗

    Old ISO 9001:2008 announcement; current certificate validity/scope not independently verified.

Report a source correction → · Return to inquiry checklist ↑

Hejia published product scope reviewed

The manufacturer website describes precision small bearings in metric and inch series.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:34

Source documentation retained for editorial review.