BearingIndex
THE BEARINGINDEX DIRECTORY

Huding

Anhui Huding focuses on drawn-cup needle bearings, one-way clutches, thrust needle components, brake needle parts and automotive stampings, with an updated Tongling factory publication and continuing Wuxi business. Its actual HF/HFL descriptions distinguish one-way torque from a clutch-and-bearing assembly carrying additional radial force. Review the complete mounting system and qualify the manufacturing site after the published2025 move.

HUDING · NEEDLE CLUTCHES, AUTOMOTIVE STAMPINGS AND A NEW FACTORY

Choose the complete needle-bearing arrangement, then qualify the production route.

Anhui Huding Bearing Co., Ltd. (安徽沪鼎轴承有限公司) describes a focus on drawn-cup needle bearings, one-way clutches, thrust needle assemblies, brake needle parts and automotive stampings. Its updated introduction reports a June 2025 move to a rebuilt Tongling factory, while some Wuxi Huding business continues. Match the product construction and actual manufacturing site before reusing an old approval or ordering against a family name. Actual updated company and relocation publication [1]

Prepare a sourcing inquiry
01

One-way torque and additional radial support are different enquiries.

Huding’s actual single-way clutch description says the drawn-cup needle clutch transmits one-way torque and can be combined with HK/BK bearings. Its separate clutch-and-bearing assembly description says that assembly transmits torque and additional radial force. Establish the support arrangement rather than choosing only by a matching bore. Actual one-way clutch description [2] Actual combined assembly description [3]

Published family exampleActual public rangeWhat the buyer should resolve
HF, steel-spring one-way clutchShaft diameter 6–35 mm in the published family table.Required lock/freewheel direction, torque and overrunning duty, and separate radial support where required.
HFL, steel-spring clutch-and-bearing assemblyShaft diameter 6–35 mm in its published family table.Combined torque and radial load, exact assembly geometry, speed, fit and lubrication.
Spring/knurled variantsKF, KFR and R suffix variants appear with different published ranges.Complete designation and controlled construction; do not treat all suffixes as interchangeable.

The public family ranges do not provide a full candidate’s torque rating, speed limit or dimension sheet. Send the complete marking and drawing. Request the locking direction as viewed from an identified side, engagement behaviour, freewheel drag and the shaft raceway’s required material, hardness, finish and geometry. Confirm the thin drawn-cup housing fit and mounting procedure with the supplier.

For a starter position, define engagement cycles, transient torque, overrunning speed and temperatures, lubrication and contamination. Test the actual assembled configuration. The company’s published starter-system customer names do not establish your component’s OEM approval or vehicle interchange. Actual starter-system positioning [1]

02

Define which parts and processes the quote includes.

The company describes thrust needle bearings, needle-and-cage assemblies, automotive brake semi-circular needle bearings and stamped parts. A thrust product photo is not a complete stack drawing. State whether the enquiry includes the cage/rollers, thrust washers and any mating raceways or stamped interfaces, then agree stack height, axial load, support-face geometry and lubrication. Actual manufacturing focus [1] Actual thrust-family detail [4]

Automotive stamped or brake part

Provide the controlled part drawing, material/thickness, critical geometry, burr direction, mating components and functional acceptance. Identify tooling ownership, sample approval and changes requiring buyer consent.

Zinc-nickel surface treatment

The catalogue includes a zinc-nickel hydraulic-component entry. Confirm whether Huding supplies the part, treats buyer-supplied parts or uses an approved external route. Agree coating composition/thickness, covered surfaces, dimensional effects, post-treatment and corrosion/hydrogen-related requirements where applicable.

The hydraulic-component detail is a family/photo publication without a quantified corrosion limit or coating specification in the reviewed text. Request the actual process specification and traceable test results for your material and geometry rather than assigning a salt-spray duration to the catalogue label. Actual zinc-nickel component detail [5]

03

Check the new factory against the displayed certificate’s address and exclusions.

The actual enlarged certificate image identifies NQA IATF 16949:2016, NQA number T184329, IATF number 0496253, first issued 16 January 2024 and with a printed validity end of 15 January 2027. Its scope is manufacture of needle bearings and stamped parts, with product design excluded. Printed dates are not confirmation of current issuer status. Actual certificate image viewed in browser [6]

That image gives 7 Jinyuan Road, Jinqiao Economic Development Zone, Yi’an, Tongling. The updated company text reports the June 2025 move, and the current dedicated contact gives 12 Hucheng Road, Yi’an Economic Development Zone. Ask for the updated certificate/site coverage and the buyer’s required relocation approval before applying an old audit to the new production route. Actual relocation publication [1] Actual current Tongling contact [8]

The company also publishes ISO 9001, ISO 14001 and occupational-health management claims. Obtain current originals and check legal entity, location, scope and issuing-body status. Management-system documents do not prove a specific component’s fatigue life, vehicle release or coating performance. Actual honour publication [6]

A Tongling Science and Technology Bureau notice dated 21 June 2024 lists Huding in a proposed high-tech recognition reward section, referring to its 2022 second-batch first recognition in Yi’an. This dated administrative evidence does not establish a current product certificate, the new plant’s qualification or your order’s quality. Actual government notice, section II entry 16 [9]

04

Separate tooling capability from product-design responsibility.

The company says it can independently design and develop progressive and multi-station tooling. The displayed IATF scope excludes product design, so agree whether Huding is making to your approved drawing, proposing a component modification or taking a defined design responsibility outside that displayed scope. Tooling design alone does not establish responsibility for the vehicle or machine design. Actual tooling capability claim [1] Actual design exclusion [6]

The equipment publication labels stamping, grinding, heat treatment, fatigue testing, plating and plating inspection images. Ask which current line/site performs your part’s processes, how subcontracted steps are controlled and which measured records accompany samples and production lots. The photo labels are not calibrated capability or a candidate’s test results. Actual equipment publication [7]

  1. Freeze part and process scope. Agree complete supplied components, controlled drawing, material/heat treatment, finish and manufacturing site.
  2. Review tooling and samples. Define tooling ownership, sample iterations and dimensional/functional reports, including clutch direction, torque and drag or thrust-stack acceptance as appropriate.
  3. Release the actual assembly. Complete the buyer’s system validation and required automotive approval dossier for the candidate, not the family label.
  4. Control repeat supply. Agree traceability, lot tests, engineering changes, capacity allocation, delivery and nonconformity remedies.

The updated introduction advertises potential annual output of 40 million needle-bearing sets and 40 million stamped parts after the new factory’s commissioning. Those figures are not capacity reserved for your model. Obtain the current line readiness and a written sample/serial schedule. Actual new-factory capacity wording [1]

05

Use the current contact to identify the order’s factory and legal entity.

The dedicated contact lists Hua Youyi, +86-13771095862, telephone +86-562-2218666 and email [email protected]. It gives the Anhui factory at 12 Hucheng Road and separately lists a Wuxi factory at Changyu Road, Minzhu Village, Yuqi, Huishan, Wuxi. Confirm the exact audit/sample-receiving location before arranging a visit or shipment. Actual contact and two factories [8]

The introduction says some Wuxi Huding business continues to serve the surrounding area. Confirm which legal entity quotes, contracts and invoices, which site manufactures each process, and who owns engineering approval and warranty. Send the complete assembly drawing and duty with the enquiry, then request the selected HF/HFL/thrust or stamped-part configuration, qualification plan and commercial terms. Actual continuing Wuxi business [1]

YOUR NEXT STEP

Prepare a Huding needle-clutch or automotive-part enquiry

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

0 model records

No documented models yet.

Try broader requirements, or explore the manufacturer’s published product scope.

Explore manufacturers →

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Official actual content read in browserHuding · updated company introduction ↗

    2025 factory move, continued Wuxi business, needle/stamping focus, tooling, customer claims and capacity wording; not buyer release.

  2. Official actual product textHuding · one-way drawn-cup needle clutch ↗

    One-way torque, HK/BK combination and HF family ranges; not exact model torque/speed approval.

  3. Official actual product textHuding · clutch-and-bearing assembly ↗

    Torque plus additional radial force and HFL variant ranges.

  4. Official actual family/photo detailHuding · thrust-bearing detail ↗

    Family reference without full thrust-stack configuration or candidate ratings.

  5. Official actual family/photo detailHuding · zinc-nickel hydraulic component ↗

    Surface-treatment catalogue entry; process, supplied parts and corrosion limits require agreement.

  6. Official certificate image enlarged and viewed in browserHuding · actual honour and IATF certificate ↗

    NQA T184329/IATF0496253, printed2024–2027 dates, manufacture needle bearings/stampings, design excluded, olderJinyuan7site; issuer/new-site status not verified.

  7. Official actual labelled images/contentHuding · equipment publication ↗

    Published process/test photo labels; not current calibrated capability or lot records.

  8. Official actual contact textHuding · current dedicated contact ↗

    Tongling Hucheng12 and separate Wuxi location, named contact/phones/email.

  9. Primary official notice actually readTongling Science and Technology Bureau · proposed2024 rewards ↗

    21 June2024, sectionII entry16 refers2022first recognition; dated proposed administrative reward, not current factory/product qualification.

Report a source correction → · Return to inquiry checklist ↑

Huding published product scope reviewed

The manufacturer website describes needle roller bearings and assemblies.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:33

Source documentation retained for editorial review.