INYOUNG
Yinyang Bearing, branded INYOUNG and formerly described as Taizhou Baoma, publishes deep-groove and several roller/angular-contact families. Its actual deep-groove table shows why the same bore is insufficient for interchange: envelope, ratings and lubrication-based speed figures differ. Confirm the current complete specification, actual material and test plan before approving a low-noise, high-temperature or long-life claim.
The bore size alone does not define an INYOUNG replacement.
Yinyang Bearing Co., Ltd. (银阳轴承股份有限公司), using the INYOUNG name, describes its predecessor as Taizhou Baoma Bearing Manufacturing and locates its business in Daxi, Wenling. It publishes deep-groove ball, cylindrical roller, tapered roller, spherical roller and angular-contact families. Ask which actual construction meets your equipment requirement before treating the broad low-noise, high-temperature or long-life positioning as a measured model specification. Actual company publication [1] Actual product and performance positioning [2]
Compare three 100 mm bore entries before selecting the series.
The actual deep-groove product table includes the following entries. The site formats some basic designations with commas, such as “61,820” and “6,020”; the designation below is the same row without that display separator. Confirm the exact full manufacturer designation on the quote, including seal/shield and clearance. Actual published deep-groove table [3]
| Catalogue row | d × D × B | Dynamic / static ratings | Grease / oil limit speed |
|---|---|---|---|
| 61820 | 100 × 125 × 13 mm | 19.6 / 23.0 kN | 2,800 / 5,600 rpm |
| 61920 | 100 × 140 × 20 mm | 43.0 / 42.0 kN | 2,600 / 5,300 rpm |
| 6020 | 100 × 150 × 24 mm | 60.1 / 54.3 kN | 4,200 / 5,000 rpm |
These share a bore, but differ in mounting envelope, ratings and published lubrication-based speed figures. Supply shaft/housing drawings, shoulder/fillet geometry, axial space, loads and the actual duty cycle. Ask the supplier to approve the candidate and clarify the seal/shield variants, clearance, accuracy, cage and lubrication basis. The table’s separate RS/2RS/Z/2Z columns are not permission to apply every open-bearing speed figure to every sealed variant.
Some shoulder headings and individual numeric fields in the published table are inconsistent. Do not use the web table as the production drawing. Request a corrected, controlled model sheet with allowable shoulder/fillet dimensions and operating-speed conditions before interchange approval. The website’s generic speed article is guidance, not a qualification of a selected bearing or a universal safety margin. Actual table and field presentation [3] Actual dated speed guidance [4]
Write the actual ring, ball, cage, seal and grease materials into the order.
The material page describes SAE 52100 high-carbon chromium bearing steel and recommends AISI 440C for potentially corrosive environments, saying its 440C part numbers use an S prefix. The manufacturing page separately lists materials including 100Cr6 and GCr15. These are published options and process descriptions; they do not establish the material of every catalogue row or interchangeable chemistry/heat treatment for every duty. Request the selected part’s controlled material specification and lot records. Actual material and S-prefix publication [2] Actual manufacturing/material route [5]
For corrosion exposure, define fluid/chemical contact, moisture, cleaning and temperature. Ask which complete configuration is available, including the cage, seals and lubricant, and agree the relevant corrosion/function test. An S prefix or stainless-steel recommendation does not alone establish the suitability of the entire bearing for food contact, a chemical environment or sustained high temperature.
Low-noise requirement
Specify component vibration quantity, units, speed/load, fixture, bands and limits, then agree the installed equipment acoustic result separately. Add startup/running torque and temperature checks where relevant.
High-temperature or long-life requirement
Provide actual temperature and duty spectrum, loads, fits and lubrication. Agree the material/heat-treatment, clearance, seal/cage/grease combination and a representative endurance test with a defined failure and wear criterion.
The material page’s three performance categories—low noise, high-speed/high-temperature, and high-load/long-life—are useful enquiry routes. They are not numeric performance ratings or a replacement for the agreed candidate test report. Actual three-category positioning [2]
Connect each process claim to evidence for the selected model.
The actual manufacturing page describes raw material, turning, heat treatment, grinding/superfinishing, assembly and quality inspection. It names automated machining/inspection, clean assembly, ultrasonic cleaning, grease filling/closure, vibration lines and material, hardness, geometry and life checks. Obtain the actual manufacturing route for your model, including subcontracted operations if any; broad listed processes do not mean every bearing uses all of them. Actual manufacturing and inspection sequence [5]
The home page advertises 28 processes, while the company page displays 26. Ask for the approved process/control plan rather than using either marketing count as an audit conclusion. The processing page’s 10 mm bore to 500 mm outside-diameter range likewise does not establish that every construction within that range is currently available. Actual home-page process count [6] Actual company-page process count [1] Actual advertised processing range [5]
- Freeze the sample construction. Approve drawing revision, materials/heat treatment, accuracy, clearance, cage, seals and lubricant.
- Check traceable component records. Agree material/heat-treatment, hardness/microstructure, dimensions/runout, clearance and vibration evidence, with methods and pass limits.
- Validate the actual assembly. Review fits, mounting force path and any thermal mounting restrictions for the chosen sealed/greased construction; test torque, temperature, noise and duty performance.
- Release repeat supply. Identify approved lots, packaging and handling, required certificates, change notification and nonconforming-lot response.
The company’s fit article explains creep, heating and wear from unsuitable fits and discusses mounting methods. Have engineering approve the actual fit and installation procedure. Do not apply the article’s generic oil-bath heating procedure automatically to a pregreased or sealed candidate. Actual fit/mounting guidance dated 23 August 2021 [7]
Confirm the legal supplier and current drawing channel.
A Wenling government document issued 5 November 2024, publishing the city’s 2023 industrial-enterprise performance evaluation, includes 银阳轴承股份有限公司 in its annex. This supports a dated administrative company record, not product certification, bearing performance or the capacity allocated to a present order. Keep supplier identity checks separate from the technical acceptance package. Actual government PDF, company entry on page 11 [8]
The dedicated contact page gives No. 6 Fangyan Road, Daxi Town, Wenling, Zhejiang, telephone 0576-86388102 and service line 400-182-8788; the site header publishes [email protected]. Confirm the drawing-review owner, contracting entity, exact production/inspection and sample-receiving addresses, current required certificates, quote, sample/serial lead time and warranty. Actual contact page [9] Published header email [6]
Website access differed during this review: source-text retrieval returned company and product content, while the browser showed maintenance over HTTP and a certificate-authority error over HTTPS. Do not treat that discrepancy as proof that production has stopped. Use the published telephone/email to request the current controlled catalogue and company details before relying on the online enquiry channel.
Prepare an INYOUNG bearing enquiry
Tick what you have ready. Copy the full checklist with its current status for your procurement notes.
Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.
Documented models.
93 model recordsEvidence, with boundaries.
Our review approach →Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.
- Actual official content retrievedINYOUNG · company introduction ↗
Yinyang identity/predecessor, Daxi location and displayed26-process claim; not audited capability.
- Actual official material textINYOUNG · material and classification ↗
52100/440C S-prefix and performance categories; candidate material/limits require controlled evidence.
- Actual official HTML table retrievedINYOUNG · deep-groove product table ↗
Specific100mm-bore rows and grease/oil figures; formatting/field inconsistencies require current corrected sheet.
- Actual official technical article dated23 August2021INYOUNG · speed guidance ↗
Generic speed discussion; ratios/margins not treated as universal candidate qualification.
- Actual official process/inspection descriptionINYOUNG · manufacturing process ↗
Material, turning, heat treatment, grinding, clean assembly and inspections; model-specific route not verified by list alone.
- Actual official home content retrievedINYOUNG · home publication ↗
Product families, header email and28-process claim; browser access differed during review.
- Actual official technical article dated23 August2021INYOUNG · fits and mounting ↗
Fit/creep and generic installation guidance; specific sealed/greased method requires approval.
- Primary56-pagePDF actually read; cover/date visually checkedWenling government · 2023 industrial performance evaluation results ↗
2024Nov5 document includes Yinyang onpage11; administrative record, not product quality or present capacity.
- Actual official contact content retrievedINYOUNG · dedicated contact ↗
Fangyan Road6, phone/service line/fax; confirm current contractual and receiving route.
Report a source correction → · Return to inquiry checklist ↑
INYOUNG published product scope reviewed
The manufacturer website describes ball and roller bearings from Wenling.
Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.
Company-level record; not a model test report · 2026-09-24 04:20:33
Source documentation retained for editorial review.