BearingIndex
THE BEARINGINDEX DIRECTORY

Jingyi Bearing

Jining Jingyi specialises in needle and precision cylindrical roller bearings. Its RN/RNU and solid-ring needle families require the buyer to define supplied rings, rolling-element envelope and mating raceway responsibility. Qualify the exact assembly and inspection plan rather than translating every catalogue diameter symbol into a complete-bearing bore or OD.

JINGYI · NEEDLE AND CYLINDRICAL ROLLER INTERFACES

Define the supplied rings and mating raceway before comparing bearings.

Jining Jingyi Bearing Co., Ltd. (济宁精益轴承有限公司) describes needle and precision cylindrical roller bearings as its speciality, with thrust, combined and non-standard work also listed. Its catalogue includes RN, RNU, JYB and solid-ring needle structures. These families make the surrounding shaft/housing and raceway specification part of the purchase decision. Official company scope [1]

Prepare a sourcing inquiry
01

Keep the diameter symbols attached to the actual structure.

The RN and RNU pages repeat broad cylindrical-bearing text and a size range labelled d 20–120, Ew 50–200 and B 15–75. Yet the actual RNU sketch labels Fw, D and B and depicts the outer ring/roller arrangement without an inner ring. That difference requires a controlled selected-part drawing; do not silently turn every listed symbol into the bore and OD of a complete two-ring bearing. Actual RNU page and browser-viewed sketch [2] Actual RN page [3]

Release decisionQuestion for the engineer
Supplied componentsWhich ring, roller/cage and any separate locating component are supplied? What are the controlled drawing symbols and dimensions?
Mating racewayWhich shaft or housing surface serves as a raceway, and what material, hardness, finish, geometry and inspection does the selected design require?
Axial functionIs this a locating or free-end arrangement? What displacement, flange and axial-load conditions apply to the actual structure?
Installed fitWhat fits, clearance and mounting procedure apply after fitting and at operating temperature?

The official text discusses different flange arrangements and cage materials. Obtain selected-model limits and cage configuration instead of applying the whole family's general “high-speed” description to an individual RN/RNU or non-standard design.

02

The hydraulic-pump family needs an actual rating and comparison basis.

The official “one hole, two needles” solid-ring needle-bearing page describes use in high-pressure gear pumps and gives a size range labelled Fw 12–70, D 30–100 and C 15–50. It says the structure can increase load by more than 20% in the same design space. That is a supplier comparative statement; the page does not identify a selected model's load rating or the comparison/test conditions. Actual family description and symbols [4]

Define the pump installation

Provide shaft/raceway and housing drawing, support arrangement, load/speed duty, pressure-related operating conditions, lubricant, temperature and cleanliness. Confirm inner-ring versus ringless supply and the actual roller/cage arrangement.

Request evidence for the choice

Obtain selected-part dimensions/ratings and the baseline used for any improvement claim. Agree pump/assembly validation and failure criteria before adopting the design for a higher load.

The solid-ring family names both with-inner-ring and without-inner-ring structures. Define who manufactures and inspects any customer-supplied raceway, and keep its material/geometry records with the bearing lot. Do not substitute a similar envelope without checking internal geometry, lubrication and the installed fit. Official ring-scope distinction [4]

03

Connect the laboratory scope to the tests your application actually needs.

Jingyi's company page states IATF16949, ISO45001, ISO14001 and CNAS laboratory recognition. Request current certificates, manufacturing entity/site and scope, and the laboratory accreditation schedule for the required test methods. A company-level statement does not show that every test or selected product is covered. Supplier qualification statements [1]

The actual Jining notice 济工信字〔2023〕14号, 13 April 2023 lists Jingyi as entry 92 among recognised industrial-enterprise “one enterprise, one technology” R&D centres. This supports that dated R&D-centre record; it is not a selected-bearing conformity or application-performance certificate. Actual government recognition table [5]

  1. Engineering release: complete components, mating raceway, dimensions/symbols, cage, clearance and lubricant.
  2. Traceable sample: agree material/heat-treatment, raceway geometry, dimensional and running inspection.
  3. Application validation: specify representative load/speed/temperature/contamination and test/report acceptance with the buyer's engineering team.
  4. Repeat manufacture: retain lot records and approval for ring/roller/cage, lubricant and process changes.

The company page also describes a proposed new-factory vision and forecast output. Do not present that plan as a completed production site or merge forecast and claimed current output into available capacity. Confirm the actual site and current process responsibility for the order. Actual company and future-plan sections [1]

04

Use the official email to obtain a precise technical owner and factory route.

The official contact/footer lists 0537-2389325 / 0537-2313834 and [email protected], with an address on Xinyuan Road, Jining Development Zone. The email domain differs from jnjybearing.com, and the published fax string is unusual; confirm the actual responsible engineer and receiving/audit address rather than guessing a fax correction or building number. Actual contact [6]

Send existing markings and mating-part measurements for a repair enquiry, or the controlled assembly drawing and duty for development. Request samples/serial quantities, non-standard tooling/design responsibility, manufacturing site, current exact-part availability, schedule, packing/corrosion protection and delivery terms. Keep the approved raceway and bearing configuration with the order and any later claim.

YOUR NEXT STEP

Prepare a Jingyi needle or cylindrical-bearing enquiry

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

0 model records

No documented models yet.

Try broader requirements, or explore the manufacturer’s published product scope.

Explore manufacturers →

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Official actual company pageJingyi · company and plans ↗

    Needle/cylindrical focus, supplier certificates/lab statements and future-site vision; current evidence to obtain.

  2. Official actual text and browser-viewed sketchJingyi ·RNU ↗

    Repeated range versusFw/D/Bsketch, ring-scope and selected-drawing questions.

  3. Official actual family pageJingyi ·RN ↗

    Family range and flange/cage text, not selected-model ratings.

  4. Official actual family pageJingyi ·one-hole double-needle ↗

    Pump use,Fw/D/Crange, with/without-inner-ring and supplier20%loadclaim; exact rating/basis to obtain.

  5. Government actual full notice/tableJining ·2023 industrial R&D-centre recognition ↗

    2023-04-13,济工信字〔2023〕14号row92; no selected-bearing conformity inferred.

  6. Official actual contact/footerJingyi ·contact ↗

    Phones,email andXinyuanRoad; precise site/fax to confirm.

Report a source correction → · Return to inquiry checklist ↑

Jingyi Bearing published product scope reviewed

The manufacturer website describes needle and precision cylindrical roller bearings.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:33

Source documentation retained for editorial review.