BearingIndex
THE BEARINGINDEX DIRECTORY

Kaiyuan Bearing

Linyi Kaiyuan offers tapered bearings, wheel-hub assemblies and pinion-bearing units through a group website that also names Shandong Zhouyan. Its 2026 enterprise-standard announcement describes long-life targets under standard conditions. Confirm the selected configuration, validation conditions and manufacturing entity rather than treating the announcement as a universal mileage warranty.

KAIYUAN · HUB SYSTEMS, PINION UNITS AND VALIDATION

Release the complete unit and its test conditions before accepting a mileage claim.

Linyi Kaiyuan Bearing Co., Ltd. (临沂开元轴承有限公司) describes tapered roller bearings as its principal product and names wheel-hub, inserted/combined hub and pinion units developed through Shandong Zhouyan Precision Bearing. The current website is headed Shandong Kaiyuan Manufacturing Group. Establish which entity and site supplies your selected bearing or assembly. Actual company/group structure [1]

Prepare a sourcing inquiry
01

The million-kilometre announcement needs its model scope and test basis.

On 22 June 2026, Kaiyuan announced its first “million-kilometre tapered roller bearings and bearing units” enterprise standard. The announcement states, under standard operating conditions, B10 life ≥800,000 km and B50 life ≥1,000,000 km, alongside materials, sealing and dedicated-grease descriptions. Treat these as the supplier's conditional standard targets; do not combine B10 and B50 into a guarantee that every delivered unit will reach a million kilometres. Actual dated announcement [2]

Obtain the controlled documents

Request current Q-KY100-ZCDY1.0-2026 revision, product/manual coverage and selected-model applicability. The announcement links a PDF through a file-sharing service; this review uses the announcement and does not claim to have checked that full standard.

Match the vehicle duty

Ask for the defined loads, speed spectrum, temperature, lubrication, contamination, sample population, failure criterion and test/report basis. Agree how those conditions relate to the buyer's route, axle duty and warranty terms.

The same announcement describes high-cleanliness GCr15, a labyrinth seal and dedicated grease, and explicitly invites corrections to this first version. Confirm the actual material/grease/seal configuration and revision for the offer. A catalogue bearing from another configuration is not automatically covered by that standard.

02

A loose tapered bearing, hub assembly and pinion unit have different supply boundaries.

Purchase routeDefine in the drawingConfirm supplied scope
Tapered bearingFull cone/cup designation, fits, shoulders, mating arrangement and installed setting.Matched components, precision/material and adjustment responsibility.
Wheel-hub assemblyAxle/wheel interfaces, mounting envelope, sealing and sensor/encoder requirements if applicable.Hub, bearings, spacer/retention, seals, grease and mounting hardware. Actual hub entry [3]
Pinion unitPinion/axle position, mating shaft/housing and assembly interfaces.Bearings, carrier/spacer/retention and any setting operation actually included. Actual pinion entry [4]

The reviewed hub and pinion pages repeat a general bearing introduction and do not supply selected-model engineering parameters. Their displayed zero prices/inventory are not a reliable order quote or stock receipt. Ask for actual model drawings, available lot and written supply scope; do not derive an MOQ or absence of capacity from website defaults.

The company also lists bearing-manufacturing equipment. A machinery offer and a finished-bearing offer need different acceptance documents and schedules. Keep the requested product and contracting/manufacturing responsibility explicit. Separate equipment and bearing activities [1]

03

Investigate spacer and outer-ring retention as part of the whole hub design.

Published application CN105065461A, 18 November 2015, names Kaiyuan and describes a heavy-truck hub arrangement with a rigid spacer between bearings and pinned outer-ring retention. It addresses axial setting and outer-ring movement as system-design questions. This is a published technical proposal, not proof that every current hub uses it, a current patent-right conclusion or a verified durability result. Actual published patent description [5]

Ask which spacer/retention architecture the selected unit uses, how component dimensions determine clearance, and what is controlled before shipment versus at axle assembly. Obtain measuring conditions, limits, calibration/inspection records and the approved mounting procedure. Confirm whether components must remain matched and how a field replacement preserves the setting.

  1. Release the configuration: selected assembly drawing, interfaces, setting, seal, lubricant and supplied hardware.
  2. Approve traceable samples: link material, heat treatment, dimensions, assembly/clearance and rotation/torque records to the lot.
  3. Validate duty: obtain agreed fatigue, sealing and temperature/running reports with actual conditions and exceptions.
  4. Control serial changes: agree lot checks and written approval for material, grease, seal, spacer and process changes.

The official company history lists ISO9002/QS9000/ISO/TS16949 milestones. Request current certificate validity, entity/site/scope and programme-specific evidence where required. Historic customer names and technical-centre claims do not replace selected-vehicle approval. Supplier qualification history [1]

04

The homepage phone is headquarters; the dedicated contact gives a sales route.

The dedicated contact labels 0539-3641035 / [email protected] as sales; 0539-3641049 is headquarters and 0539-3222529 is procurement. Use the sales route to obtain a named engineer and quotation, rather than sending a customer enquiry to the company's purchasing department. The address is 200 metres east of the West Outer Ring Road / Yinghua Road intersection, Yinan County, Shandong. Actual department labels [6]

Confirm group/Kaiyuan/Zhouyan manufacturing and contracting entity for the selected unit, audit/receiving site and invoice/payee. Request sample and serial quantities, tooling if needed, validation schedule, serial lead time, packing/corrosion protection and delivery terms. Agree warranty scope and claims evidence against the actual approved configuration and duty; a news announcement is not the order contract.

YOUR NEXT STEP

Prepare a Kaiyuan hub or pinion enquiry

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

0 model records

No documented models yet.

Try broader requirements, or explore the manufacturer’s published product scope.

Explore manufacturers →

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Official actual company pageKaiyuan · company ↗

    Tapered focus, group/Zhouyan activities and historical qualifications.

  2. Official actual dated announcementKaiyuan ·2026 long-life enterprise-standard announcement ↗

    2026-06-22 conditionalB10/B50targets/material/process descriptions; full linked standard not reviewed.

  3. Official actual category detailKaiyuan · hub assembly ↗

    Hub offer category; generic text/default values do not establish selected-model parameters or stock.

  4. Official actual category detailKaiyuan · pinion unit ↗

    Separate pinion-unit category; supplied engineering scope to obtain.

  5. Actual published patent application textCN105065461A · heavy-truck hub arrangement ↗

    2015-11-18 publication, rigid spacer and pinned outer-ring proposal; not current product implementation or patent-right guarantee.

  6. Official actual department directoryKaiyuan · contacts ↗

    Sales/HQ/procurement distinction, emails andYinanroute.

Report a source correction → · Return to inquiry checklist ↑

Kaiyuan Bearing published product scope reviewed

The manufacturer website describes tapered roller and wheel-bearing units.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:33

Source documentation retained for editorial review.