BearingIndex
THE BEARINGINDEX DIRECTORY

LS

LS publishes lubricated and PTFE-lined spherical plain bearings, rod ends and related components. Select the sliding pair and installed duty first, then confirm maintenance, fits, controlled limits and the specific manufacturing/site evidence.

LS · SPHERICAL PLAIN BEARING SELECTION

Specify the sliding pair and the movement it must survive.

Fujian Longxi Bearing (Group) Corporation Limited publishes radial, angular-contact and thrust spherical plain bearings, rod ends and other components. These are sliding-bearing routes. The first useful decision is the actual sliding pair, motion, load and maintenance access, rather than choosing a rolling-bearing replacement from nominal bore alone. Actual LS family directory [1]

Prepare a sourcing inquiry
01

Steel/steel, PTFE composite and PTFE fabric are distinct builds.

GE…E / GE…ES / GE…ES-2RS: steel/steel

The actual radial product page specifies bearing-steel rings, heat treatment/phosphating and a molybdenum-disulfide-coated sliding surface. It says the E version lacks the lubrication grooves/holes provided on the other listed versions; 2RS denotes seals at both ends. Confirm access, lubricant and replenishment instructions for the complete designation. Actual steel/steel construction [2]

GE…C: steel/PTFE composite

The actual page describes a formed carbon-steel outer ring with PTFE composite lining and a hardened, hard-chrome-plated inner ring. It also describes a stainless-ring option identified GE…C/X; confirm the complete option and corrosion requirement rather than assuming every C model is stainless. Actual composite-lined construction [3]

GE…ETL-2RS / GE…XTL-2RS: steel/PTFE fabric

The actual page describes bonded PTFE fabric and end seals. XTL uses an outer ring split axially into two halves and held by locking rings. Confirm exact construction, liner, retention and mounting; a shared PTFE label does not make composite and woven-liner versions identical. Actual fabric-lined construction [4]

“Self-lubricating” identifies a published product route. Obtain the manufacturer's instructions for lubrication, contamination control, wear limits, inspection and replacement in your actual duty; it is not a promise of indefinite life or freedom from all maintenance.

02

A 20×35×16 mm envelope can hide different ratings and maintenance.

The following values come from the actual LS product tables, explicitly headed mm and kN. B is the inner-ring width; all three rows separately publish outer-ring width C = 12 mm. This comparison illustrates why geometry alone does not approve a substitute. Actual GE20ES row [2] Actual GE20C row [3] Actual GE20ETL-2RS row [4]

Designation / sliding paird×D×BPublished dynamic / static ratingPublished family temperature
GE20ES-2RS · steel/steel20×35×16 mm30 / 146 kN−30 to +130 °C
GE20C · steel/PTFE composite20×35×16 mm31 / 78 kN−50 to +150 °C
GE20ETL-2RS · steel/PTFE fabric20×35×16 mm83 / 139 kN−30 to +130 °C

These are manufacturer catalogue values, not permissible application loads or tested service life. Confirm load-rating definitions, required life, oscillation and temperature, fits and residual clearance, seal/liner compatibility and any reductions before approval. The unsealed GE…ES family is separately described at −50 to +150 °C; do not carry that range into a 2RS order.

Obtain a current controlled drawing/data sheet for the full suffix and duty. Do not rank suppliers by the largest spherical-plain-bearing dynamic rating or copy a rating into a bearing-life formula without the manufacturer's applicable method.

03

LS’s own 2020 handbook warns against cross-manufacturer rating comparisons.

The original linked handbook is explicitly Catalog 2020. Its printed page 15 explains that manufacturers may define spherical-plain-bearing load ratings differently and says their ratings cannot simply be compared. Printed page 16 separates radial/axial/combined load, relative movement versus static loading, and constant versus alternating load. That is a concrete reason to describe the joint's movement and reversal before asking for a size recommendation. Actual original handbook, printed pp. 15–16 [5]

Describe the motion and interfaces

Provide shaft/housing or rod-end drawings, load direction/magnitude and reversal, oscillation angle/frequency or other actual motion, temperature/exposure, available envelope and retention. Include start/stop and shock conditions where relevant.

Define the life and maintenance question

State the required duty duration, allowable wear/play/torque and inspection/replacement criterion, maintenance access and lubricant restrictions. Ask LS to identify the applicable sliding-pair rating/life method and confirm suitability for that duty.

The handbook includes separate tolerances, clearance/fits and dimension tables for lubricated, self-lubricating, thrust, angular-contact and rod-end routes. Its interchange list is an enquiry aid, not an approved cross-brand replacement. Its 2020 certificate gallery and historical company figures are not treated as current qualification or available capacity.

04

Agree fit, wear and test editions explicitly.

The national-standard platform identifies GB/T 304.3-2023, spherical plain bearings—fits, as current, implemented 1 December 2023 and replacing the 2002 edition. It names LS among the drafting units. Its record confirms the edition and participation; it does not prescribe an installation fit for your actual drawing in this page. Actual fits-standard record [6]

The official industry-standard record lists JB/T 10860-2026, spherical-plain-bearing life-test procedure, published 13 February 2026 with implementation date 1 September 2026, replacing JB/T 10860-2008. Specify the applicable contract/test edition and obtain its technical method before agreeing a life test; no cycle count, test load or pass criterion is invented from the title. Actual life-test edition and dates [7]

  1. Approve the controlled build

    Link full designation, drawing/revision, sliding pair, liner/surface treatment, seals, dimensions and installed clearances to an identified sample.

  2. Define what the test proves

    Agree loads/movement/temperature/exposure, sample quantity, methods and numerical wear, play, torque or life criteria appropriate to the project. Identify the laboratory and any exact accredited scope needed.

  3. Carry it into repeat supply

    Request lot/material/liner and process traceability, release documents and change approval. Retain the approved reference, shipping lot and agreed handling of nonconforming stock.

The standards platform separately confirms that the TC98/SC1 spherical-plain-bearing secretariat is based at LS. Standards work is a distinct institutional role, not product certification or approval of all laboratory tests. Actual technical-committee record [10]

05

Headquarters, three plants and support sites have different roles.

The actual contact directory separates the headquarters at Hubin Road 1, building 1, rooms B1501–B1901, from three Lantian plants at Longxiang North Road 8, Fuqi North Road 9 and Xiaogang North Road 32, all in Zhangzhou's Longwen district. Ask which entity/site actually manufactures, inspects and ships the proposed bearing rather than using the office address as the factory address. Actual headquarters and plant directory [9]

The current official quality page links an original two-page IATF image naming the group company at Fuqi North Road 9, registration 12 111 26739 TMS, IATF number 0555775, for design/manufacture of bearings including bushings and universal-joint crosses. It states 21 November 2024 to 20 November 2027; its annex separates remote support and extended production locations. Current issuer status and the applicability of each annex location to a proposed order were not independently established. Request the current complete certificate/annex and site-specific confirmation. Actual quality page and original scan [8]

The page also lists ISO 9001:2015 and AS9100D; request the exact current holder/scope and verification where required. Aviation project approval, current QPL listing and universal laboratory accreditation are not inferred from a logo, application list or the older handbook.

Domestic market

0596-2072087
[email protected]

International market

0596-2072883
[email protected]

The directory separately provides aviation sales and after-sales routes. Send the defined application and evidence request to the appropriate team, then confirm contract party, manufacturing site, sample terms, quantity/MOQ and lead time. No current stock, quotation, approval or delivery promise is asserted. Actual role-specific contacts [9]

YOUR NEXT STEP

Prepare an LS spherical-plain-bearing application brief

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

0 model records

No documented models yet.

Try broader requirements, or explore the manufacturer’s published product scope.

Explore manufacturers →

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Official directory, browser readLS · spherical plain bearing family directory ↗

    Actual radial/angular/thrust/rod-end routes; no unlisted fitment or current inventory inferred.

  2. Official model-level publication, browser checkedLS · GE…E/ES/ES-2RS construction and model table ↗

    Steel/steel, lubrication/seal differences, actual GE20 row with mm/kN headings and family temperature; no installed approval inferred.

  3. Official model-level publication, browser readLS · GE…C / GEG…C composite-lined table ↗

    PTFE composite construction, GE20C values, family temperature and C/X ring option; no universal stainless build or life guarantee inferred.

  4. Official model-level publicationLS · GE…ETL/XTL-2RS fabric-lined table ↗

    PTFE fabric/seals/split construction, actual GE20ETL row and temperature; no application equivalence inferred.

  5. Original official PDF, cover/contents/selected technical pages rendered and readLS · original spherical plain bearing Catalog 2020 ↗

    Printed pp.15–16 rating-definition and load/motion boundaries; dated catalogue and certificate/interchange material not current approval.

  6. Primary standard recordNational standard platform · GB/T 304.3-2023 fits ↗

    Current fits edition, dates/replacement and named drafting entities; no unexamined fit tolerance asserted.

  7. Primary industry-standard recordNational standard platform · JB/T 10860-2026 life test ↗

    Published edition, 1 September 2026 implementation date and replacement; full test text, cycles and pass limits not supplied.

  8. Official quality publication and original image, browser viewedLS · quality system and original IATF scan ↗

    Actual Fuqi North Road holder/site, certificate numbers, scope, printed dates and annex roles; current issuer status/order applicability not independently established.

  9. Official contact directoryLS · headquarters, plants and market contacts ↗

    Separate office/three plant addresses, domestic/export/aviation and after-sales roles; actual order site and commercial terms need confirmation.

  10. Primary technical-committee recordNational standard platform · TC98/SC1 secretariat ↗

    Named LS secretariat and professional scope; no product certification or laboratory accreditation inferred.

Report a source correction → · Return to inquiry checklist ↑

No reviewed model or batch reports are available. Independent verification is not implied.