BearingIndex
THE BEARINGINDEX DIRECTORY

Luoerman

Yangzhou Luoerman describes two bearing workshops and a separate flexible-connection workshop. Its scope combines electrical-equipment bearings, needle/one-way clutch and joint or oil-free bearings with grounding braids and copper/aluminium connections. Separate mechanical support requirements from conductor requirements, obtain part-specific drawings and tests, and do not infer electrical insulation or a current certificate from broad website labels.

BEARINGS AND ELECTRICAL CONNECTIONS · DEFINE THE PART’S JOB

Mechanical support and electrical connection need separate acceptance plans.

Yangzhou Luoerman Bearing Co., Ltd. (扬州罗尔曼轴承有限公司) describes two bearing workshops and one flexible-connection workshop. Its official introduction lists electrical-equipment bearings, drawn-cup needle bearings, one-way needle clutches, joint and oil-free bearings, alongside copper/aluminium connections and copper braids. This mixed scope makes the part’s actual job the first enquiry question: supporting motion, transmitting one-way torque or carrying an electrical connection. Actual company scope and workshop description [1]

Prepare a sourcing inquiry
01

Begin with the function, not the electrical-equipment label.

Mechanical support or one-way motion

The company advertises drawn-cup needle bearings, one-way needle clutches, joint bearings and oil-free bearings. Send the intended shaft/housing arrangement and identify whether the requirement is radial support, articulation, oscillation or one-way engagement. Those are different jobs; one category cannot establish the performance of another. Actual advertised bearing families [1]

For a drawn-cup part, ask which shaft surfaces/components are included and what installed fit and running surface the candidate requires. For a one-way clutch, specify the drive/overrun direction, torque and speed duty and the bearing support arrangement. For joint or oil-free supply, request the exact construction, motion duty and allowed lubrication/maintenance conditions.

Do not infer insulation from “electrical-special”

The actual electrical-bearing detail page is titled 电气专用轴承 but its description discusses general lubrication and diesel-generator maintenance. It does not identify a controlled model, electrical insulation construction or a part-specific voltage/test requirement. That label alone does not support an insulated-bearing claim or approval for a particular switching mechanism. Actual electrical-bearing detail and its evidence boundary [2]

Explain the bearing’s mechanical location inside your equipment. If electrical properties are required, state the actual requirement and ask for the candidate’s construction and test document; do not assume the website’s title answers it.

The needle-bearing detail page similarly contains a generic family title without a usable model/dimensional parameter group in the readable publication. Ask the supplier for the actual candidate drawing and designation rather than copying catalogue-system default fields into a specification. Actual needle-bearing detail [3]

02

Grounding braids and copper/aluminium connections are their own procurement route.

The website separately publishes grounding straps/copper braided flexible connections and copper/aluminium flexible connections. Their actual detail pages provide the family titles and images, but no usable part-specific conductor cross-section, current duty or terminal drawing in the readable parameter area. A category listing does not establish a rating for your installation. Actual grounding/braid detail [4] Actual copper/aluminium detail [5]

Your required roleGive the supplierAgree for the proposed part
Grounding/bonding connectionConnection points, actual protection requirement, available route, movement and terminal interfaces.Conductor/material construction, terminal drawing and the electrical/mechanical verification required by your equipment specification.
Flexible current-carrying connectionCurrent duty and thermal conditions, flexing movement, length/envelope and mating terminal arrangement.Cross-section, connection method, resistance/temperature criteria and movement-cycle acceptance under agreed conditions.
Copper/aluminium connectionActual materials and interfaces on both sides, environment and assembly constraints.Exact supplied material/joint construction, surface treatment, contact requirements and relevant joint-validation evidence.

These are buyer-defined inputs and acceptance questions, not verified services or ratings offered by Luoerman. Obtain the candidate’s actual design and installation instructions before approving a conductor. Mechanical-bearing inspection records cannot substitute for electrical-connection test evidence.

03

A mixed purchase needs two technical files and clear workshop responsibility.

The official two-bearing-workshop/one-connection-workshop description explains how the company presents its activities, but does not identify the process route or release responsibility for your drawing. Its advertised application groups include high/low-voltage electrical equipment and several mechanical sectors; no named customer approval or present order qualification was independently established. Actual workshop and application self-description [1]

  1. Choose the product route and owner. Separate the bearing and conductor line items, their full drawings/revisions, supplied components and responsible engineering/production team. Confirm any external operation and traceability to the final part.
  2. Approve the candidate specification. For a bearing, define fit, clearance, motion/load/speed, material and lubrication. For a connection, define material/cross-section, terminations, electrical/thermal duty and movement. Request supplier confirmation of measurable acceptance limits.
  3. Accept a representative sample. Link dimensional/material records to the sample and test it in the intended assembly under the agreed duty. If both product routes are involved, keep the two acceptance reports distinct.
  4. Release production with controlled changes. Confirm lot identification, inspection scope, design/material/site-change approval and nonconformance handling. Agree MOQ, prototype/tooling costs and delivery milestones for each part rather than inferring them from advertised annual scale.

No numerical load, torque, voltage, current, service life or lubrication-free guarantee was obtained for a named candidate. “Oil-free” remains an advertised family description until the specific part and its operating conditions are confirmed.

04

Historical company notices do not fill the product-certificate gaps.

The introduction cites ISO9001:2008 and TS16949-2009. The actual honours page is dated 7 September2018 and displays small award/AAA images; it does not establish a readable current quality-system certificate with issuer, number, covered site and expiry. Request the relevant current original and issuer-status route for your procurement. A missing usable public certificate is a verification gap, not a finding that no certificate exists. Historical standard-edition claims [1] Actual honours publication and viewed graphic [6]

Two original government-hosted records contain the company name: the 2021 third-batch proposed technology-SME list (PDF page416, row10382) and the 2025 provincial specialized-SME second-batch public-notice list (PDF page159, row6488). These are dated proposed/public-notice records, not present bearing or conductor test certificates or a final current-status check. Original 2021 proposed-list attachment [7] Original 2025 public-notice attachment [8]

The dedicated contact page gives Yiling Industrial Park, Jiangdu District, Yangzhou, [email protected] and +86 514 86568137 / 86568157; the site also publishes mobile +86 13905251884. Confirm the exact legal seller, drawing-specific workshop, engineering contact and sample/delivery address. No manufacturer enquiry was submitted. Actual dedicated contact [9]

YOUR NEXT STEP

Prepare a Luoerman part-function and acceptance brief

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

0 model records

No documented models yet.

Try broader requirements, or explore the manufacturer’s published product scope.

Explore manufacturers →

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Actual manufacturer self-descriptionLuoerman · official company introduction ↗

    Two bearing and one connection workshop, mixed product scope and historical standards; scale/customer claims not independently verified.

  2. Actual official detail, live browser readLuoerman · electrical-special bearing detail ↗

    Generic maintenance body, no named engineering or electrical-insulation qualification; system defaults not commercial evidence.

  3. Actual official product publicationLuoerman · needle-bearing detail ↗

    Family listing with missing usable model/dimensional parameter group; not a rated candidate or quotation.

  4. Actual official product publicationLuoerman · grounding strap/copper braid detail ↗

    Grounding/braid family presence; no part-specific electrical or terminal specification used.

  5. Actual official product publicationLuoerman · copper/aluminium connection detail ↗

    Separate conductor family; no assumed material joint process, current rating or performance test.

  6. Actual official text and browser-viewed award graphicLuoerman · honours page, 7 September2018 ↗

    Award/AAA images do not establish current ISO/IATF certificate scope/status.

  7. Original government PDF, actual download/text readMOST-hosted · Jiangsu2021 third-batch proposed technology-SME list ↗

    444-page attachment, first-page title and PDF page416 row10382; proposed historical company record, not current product certification.

  8. Original government PDF, actual web text readGovernment-hosted · Jiangsu2025 specialized-SME second-batch public list ↗

    175-page attachment title and PDF page159 row6488 read; local download403 and screenshot timeout, no final/current product approval asserted.

  9. Actual official contactLuoerman · dedicated contact ↗

    Yiling Industrial Park, email and phones; exact entity/site/team requires direct confirmation.

Report a source correction → · Return to inquiry checklist ↑

Luoerman published product scope reviewed

The manufacturer website describes needle bearings for electrical applications.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:33

Source documentation retained for editorial review.