BearingIndex
THE BEARINGINDEX DIRECTORY

Maichi

Xingtai Maichi’s company presentation on Bearing.cn focuses on single-row, double-row and inch tapered roller bearings alongside thrust-ball and deep-groove bearings. Its listed website currently returns an application error. The reviewed industry-platform product display provides family images rather than usable model ratings, so a buyer should request a full designation, cone/cup or assembled-set drawing and a defined inspection grade before ordering.

TAPERED ROLLER PROCUREMENT · DEFINE THE SET AND INSPECTION GRADE

Make the tapered-bearing set and acceptance grade explicit.

Xingtai Maichi Bearing Manufacturing Co., Ltd. (邢台迈驰轴承制造有限公司) presents itself on the Bearing.cn industry platform as a manufacturer of single-row, double-row and inch tapered roller bearings, with thrust-ball and deep-groove families also described. The linked company website was attempted first and actually returned an application error in the browser. The platform presentation is useful manufacturer-attributed evidence, but it does not establish current model specifications or approved application performance. Actual manufacturer presentation hosted on the industry platform [1] Listed website checked on 8 October 2026 [2]

Prepare a sourcing inquiry
01

Separate the advertised tapered range from the product-photo display.

The company presentation specifically names single-row, double-row and inch tapered roller bearings. The actual product-display page has four items: cylindrical roller, spherical roller, deep-groove and tapered roller bearings. The reviewed tapered detail displays a family name and photograph without a readable designation, dimensional/load table or speed specification. Neither a family photograph nor broader display proves every construction is currently manufactured or stocked. Actual company wording [1] Actual four-item display [3] Actual tapered detail and specification gap [4]

Advertised tapered routeInformation to supplyEvidence to request
Single-row replacementExisting full bearing designation and approved cone/cup or assembled drawing; shaft/housing fits, retaining arrangement and required installed setting.Exact proposed cone and cup identifiers, dimensions/tolerances and assembly width, clearance/setting method and full suffix meanings.
Double-row or paired arrangementLoad directions, arrangement drawing, spacers if present, locating/retention and required mounted clearance or preload.Complete set construction, matched components/spacers if supplied, setting measurement and traceability; do not approve two single bearings as an assumed double-row equivalent.
Inch-series partOriginal full cone/cup designation and drawing in explicit units, including chamfers, ring widths and total assembled width.Controlled dimensional comparison and material/clearance/suffix differences; rounded metric envelopes or a similar photograph cannot establish interchangeability.

For a new application, supply radial/axial loads, speed/duty, life and environmental requirements. Ask the supplier to identify a candidate and document its selection assumptions. No maximum speed, life guarantee or numerical load capability was established from the viewed public product detail.

02

Replace “premium P6” with a drawing-linked inspection agreement.

The manufacturer-attributed introduction distinguishes ordinary and high-end product quality, saying the latter reaches P6. It also claims checks for material/metallographic structure, grinding burns, raceway crown, roundness and roughness, with bore, assembly height and appearance fully inspected. These are supplier statements, not sample or lot results; P6 should not be treated as a blanket life, material, noise or high-speed guarantee. Actual P6 and inspection wording [1]

Define the delivered grade

Ask which standard/edition and clauses define the quoted precision, which dimensions and rotational features are controlled, and what changes between the ordinary and premium offers. Put the selected grade, construction, material, heat treatment, lubricant and seal scope in the purchase specification.

Define the inspection evidence

Agree limits, measurement state/method, sample size or complete-inspection scope, instrument/calibration evidence and lot-linked results. Specify assembly-height measurement and whether cone/cup or supplied-set results must be recorded together.

The actual first page of the company album captions height inspection, metallographic testing/qualified products, hardness testing and a warehouse corner among bearing photos. These images/captions cannot establish current calibrated capability, traceability or acceptance of the quoted batch. Request the actual heat/material records, defined burn/crown/roughness checks and inspection report for your candidate. Actual album page and limits of photographic evidence [5]

If the part is to be supplied under an OEM or private label, establish whose controlled design is used, who owns the tooling/specification, how markings and lot identity are controlled, and which production operations are performed at the quoted site. The company’s general OEM claim does not independently establish a named customer relationship.

03

The listed equipment sectors are enquiry contexts, not approvals.

The presentation lists pellet machines, reducers, agricultural machinery, axles, vehicles and other industrial sectors. It does not supply model-specific approvals for those uses. In particular, the railway heading is not evidence of railway qualification. Describe the actual bearing position and conditions rather than requesting a generic “bearing for this industry”. Actual application and OEM/export wording [1]

  1. Document the assembly. Provide shaft/housing drawings, fits, retention, lubrication and installed clearance/preload requirements with the full bearing/set designation.
  2. Document the operating cycle. Identify radial/axial loads, reversal/shock, speed, starts/stops, temperature and contamination. For a reducer or axle, explain the actual load path; for machinery exposed to dust or water, define the surrounding sealing arrangement.
  3. Accept samples against the part and assembly. Agree material/heat-treatment, geometry and any needed performance tests, then validate temperature, movement, vibration or wear under a representative installed duty. Define criteria before testing.
  4. Control repeat supply. Require lot traceability, approved design/material/site/process changes and an agreed complaint measurement package. Confirm sample and repeat-order quantity, production lead time, packaging and commercial terms for this specific specification.

Promotional delivery and after-sales wording in platform news is not a verified response-time or lead-time commitment. No service enquiry or product trial was performed during this review. Ask for the responsible technical/quality contact and written delivery and complaint terms.

04

Use the actual legal record and dated government notice carefully.

The platform-linked original business-licence image was loaded, enlarged and read in the browser. It names 邢台迈驰轴承制造有限公司, shows credit code 91130535MA094JKX6Y, establishment 28 September 2017 and an address in Sunzhuang Village, Daliuzhuang Township, Linxi County. The photographed licence is a historical document, not a current registry-status check. Obtain a current licence and confirm that the seller, invoice and receiving/manufacturing site correspond. Actually viewed original licence image [6]

The Hebei industry authority’s original 52-page attachment is a 2025 proposed high-tech-enterprise subsidy public notice, with public-comment dates 19–23 June 2025. Page 47, row 1805 names the company and certificate GR202413001215. This is a dated public-notice record, not evidence that the subsidy was paid, present certificate issuer status was checked or a bearing batch was approved. Actual original notice title and company row [7]

The actual honours page displays four items: HEBHR and MAIC trademark-registration certificates, credit-code document and business licence. Trademark/identity documents do not establish current quality-system scope. The introduction’s GB/T 19001-2016 and ISO wording needs the current original certificate, legal entity/site/scope and issuer-status check; no current quality-system certificate was verified. Platform membership duration and “credit score” are not independent product-quality ratings. Actual honours index [8] Manufacturer-attributed system and platform wording [1]

The platform publishes manager Bi, +86 15630917999, mobile +86 17659953888, [email protected] and Sunzhuang Village. The listed corporate website is currently unusable in the reviewed state, so confirm these contacts’ current responsibility and the engineering/sample receiving route directly. No enquiry was sent. Actual published contact route [1] Actual website availability boundary [2]

YOUR NEXT STEP

Prepare a Maichi tapered-set and inspection-grade brief

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

0 model records

No documented models yet.

Try broader requirements, or explore the manufacturer’s published product scope.

Explore manufacturers →

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Actual industry-platform manufacturer-attributed text and browser readMaichi · company presentation on Bearing.cn ↗

    Tapered routes, ordinary/premium/P6 and inspection claims plus contacts; not independent audit or application approval.

  2. Actual browser and HTTP attempt, 8 October 2026Maichi · listed corporate website ↗

    Application error at review; no usable corporate model data inferred.

  3. Actual platform-hosted displayMaichi · product display ↗

    Four family items; not full model inventory or verified manufacturing scope.

  4. Actual platform product-detail bodyMaichi · tapered-roller detail ↗

    Family title/photo, no readable numerical model specification established.

  5. Actual first-page captionsMaichi · company album ↗

    Height/metallography/hardness captions; photos not calibrated inspection or lot acceptance.

  6. Original platform-linked image loaded, enlarged and visually read in browserMaichi · photographed business licence ↗

    Exact entity/code, 2017 establishment and address; historical licence, not live registry state.

  7. Original 52-page government PDF downloaded and readHebei industry authority · 2025 proposed high-tech subsidy public notice ↗

    Notice wording/comment dates and page 47 row 1805; not final paid subsidy or product conformity.

  8. Actual platform publicationMaichi · honours index ↗

    Four trademark/identity documents; no current quality-system issuer verification performed.

Report a source correction → · Return to inquiry checklist ↑

Maichi published product scope reviewed

The manufacturer website describes tapered roller and ball bearings.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:33

Source documentation retained for editorial review.