NF
NF publishes needle bearings, overrunning clutches, alternator OAP assemblies and precision parts. Select the functional route, retain shaft/interface and direction details, then verify the current drawing, responsible site and order-specific validation.
Start with the transmission function, then define the interfaces.
Jiangsu Nanfang Precision Co., Ltd. publishes three distinct transmission routes: needle-bearing support, one-way/overrunning clutch function and an alternator overrunning pulley assembly (OAP). It also lists precision machined parts. A bearing envelope alone cannot describe a clutch’s engagement or an OAP’s connection to an alternator and belt system. Actual official business and function descriptions [1]
A support bearing, an overrunning clutch and an OAP answer different problems.
| Published route | Actual source distinction | What to put in the enquiry |
|---|---|---|
| Needle-bearing support | Drawn cups, cage/needle assemblies, machined-ring bearings, rollers and combined radial/thrust structures. | Bearing position, radial/axial loads, supplied rings and mating shaft/housing definition. |
| Overrunning clutch | The clutch page describes automatic engagement/disengagement with speed or rotational-direction changes and lists roller/sprag routes. | Drive and overrun directions, torque/cycle, relative speed and the supplied races/gear assembly. |
| Alternator OAP | The official description addresses engine-speed fluctuations in the front accessory drive. | Exact alternator/old pulley identification, belt/shaft/tool interfaces and installed functional validation. |
The needle catalogue distinguishes NA/NK, cage assemblies, support rollers and combined radial/thrust products; the clutch list includes CSK, roller clutches, sprags and assemblies with outer rings/gears. These category labels are routing evidence, not proof that an item meets your machine’s duty. Actual needle product/structure list [2] Actual clutch function and product list [3]
Ask the engineering team which parts are included and which shaft/raceway, housing or thrust components you must provide. Agree the relevant material, hardness, geometry, surface finish, fits and lubrication in the controlled design rather than assuming a loose bearing’s envelope defines the complete arrangement.
An empty Fw field must remain unknown; it is not zero.
The actual official database presents separate Shaft Diameter, Fw, D and C columns, labelled mm. The initial rows below were read in the browser. They show why the field labels and complete designation should accompany an enquiry; this is not a statement about the full product range or current inventory. Actual database and unit headings [4]
| Published designation | Shaft / Fw / D / C, mm | Keep in the purchase definition |
|---|---|---|
| HK 0408 TN | 4 / 4 / 8 / 8 | Full TN suffix and the manufacturer’s current controlled construction/drawing. |
| HK 0607 | 6 / 6 / 10 / 7 | All four published fields and the mating arrangement. |
| NKIB 5901 | 12 / -- / 24 / 16 | Request the missing Fw definition/current drawing; do not convert the dash to zero or copy another row. |
The database offers model and separate minimum/maximum dimension searches. Use it to find a candidate, then request load/speed, clearance, lubrication and assembly acceptance for that candidate. A dimension match is not an approved substitution, and this review does not assign a meaning to the TN suffix without the applicable product specification. Actual search fields and model records [4]
Retain rotation direction, tool connection and the coating suffix.
The original official OAP catalogue gives separate dimension, vehicle-application, cross-reference, individual-product and installation sections. Its printed page 2 (PDF p.6) lists NB80030 as CCW while neighbouring NB80029 is CW. Both show a spline connection, but the rows have other different fields. They are a direction-check example, not interchangeable alternatives. Confirm the manufacturer’s viewing convention and approved drawing for your alternator. Original OAP direction/connection table [5]
What the NB80005A5 example actually says
Printed page 1 (PDF p.5) separates the base OAP identifier, surface coating and rust-prevention grade. Its A coating entry is electrophoresis, and its grade 5 entry is published as 196 hours. These are catalogue code definitions: the table does not establish an installed service life, a current batch result or your corrosion test’s method/acceptance. Request the current full designation, coating specification and test conditions/report. Do not silently replace the published value with a guessed conventional duration. Actual code-definition page [5]
The final installation page (printed p.68, PDF p.72) shows spline/hex tool arrangements, initial hand tightening, a combination wrench and a cap. It does not give a universal tightening torque on that page. Request the current assembly-specific torque/procedure, tool engagement, thread and cap requirements; do not infer these from a catalogue photograph. The catalogue’s vehicle/cross-reference lists are lookup aids, not an order-specific fit guarantee. Actual installation page and catalogue organization [5]
A standards project or accepted expansion report is not a qualified delivery lot.
The national standards platform lists Nanfang Precision among the drafting organizations for 20256614-T-604, revising the drawn-cup needle-bearing dimensional/GPS/tolerance standard. The record displayed a consultation-stage plan when reviewed. This supports documented technical participation; it is not a published replacement standard, a product certificate or evidence of conformity for your batch. State the applicable released standard/revision and actual drawing requirements in the contract. Actual standards-plan status and participants [6]
Wujin’s 2026-06-04 environmental-file acceptance notice separately lists Nanfang Precision’s proposed precision-component project east of Fenglin Road and north of Jingye Road. Acceptance for environmental review does not establish approval, commissioning or available production capacity. The official sales/contact page still publishes 9 Longxiang Road. Identify the actual manufacturing and inspection site for your order, including any planned site transfer. Actual government acceptance notice [7] Current published contact address [8]
The home page states IATF 16949, ISO 14001 and ISO 45001 certification. Request the current certificate, issuer, dates, exact site and scope before using those claims in qualification; their present issuer status has not been independently established here. Request material/heat-treatment traceability, sampling and inspection records, sample/process approval and change notification for the specified product. Customer logos and broad sector lists are not approvals for your programme. Actual manufacturer certification statements [1]
Use the dedicated sales line and a function-specific approval brief.
The dedicated contact page publishes headquarters at 9 Longxiang Road, Wujin High-tech Development Zone, Changzhou, Jiangsu, main line 0519-86552111, sales line 0519-86570979 and [email protected]. Use that explicit contact-page spelling: some shared footer text has a different email spelling. Confirm the responsible legal seller and product engineer when receiving a reply. The page also distinguishes a Germany branch and India office; these labels alone do not prove where your item is manufactured. Actual dedicated contact page [8]
For a support bearing, agree mating raceways/fit and load/speed acceptance. For a clutch, agree drive/overrun function and cycle/torque validation. For an OAP, agree complete alternator and belt-system interfaces and functional checks. Request a dated technical offer, sample and production approval plan, nonconformance route and current quantity, costs and lead time; no stock or delivery slot has been verified by this directory.
Prepare an NF transmission-function brief
Tick what you have ready. Copy the full checklist with its current status for your procurement notes.
Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.
Documented models.
0 model recordsNo documented models yet.
Try broader requirements, or explore the manufacturer’s published product scope.
Explore manufacturers →Evidence, with boundaries.
Our review approach →Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.
- Official manufacturer publicationNF · actual business, OAP function and qualification statements ↗
Distinct product functions and manufacturer certification claims; present certificate status, clients/stock/capacity not independently established.
- Official product/structure listNF · needle-bearing product structures ↗
Drawn cup/cage/NA/NK/roller/combined routes; category membership not application qualification.
- Official functional description and product listNF · overrunning clutches ↗
Engagement/disengagement concept and roller/sprag/assembly routes; no torque or programme approval inferred.
- Official actual browser table and search fieldsNF · needle-bearing model database ↗
HK0408TN, HK0607, NKIB5901 fields with mm headings; Fw dash retained as unspecified, not zero or full range.
- Official original PDF, selected pages rendered/readNF · original OAP catalogue ↗
Printed pp.1/2/68 (PDF5/6/72): coating-code definitions, direction/connection and installation tools; no universal torque, fit, corrosion life or current stock guarantee.
- Primary standards-plan recordNational standards platform · 20256614-T-604 ↗
Drafting participant and displayed consultation status; plan not published replacement or product/lot certification.
- Primary dated project-acceptance publicationWujin government · 2026-06-04 environmental-file acceptance ↗
Company and separate Fenglin/Jingye project location; not approval, commissioning or current available output.
- Official contact pageNF · dedicated headquarters and overseas contacts ↗
Actual sales line, correctly spelled dedicated email and Longxiang9; branch/office not assumed production origin.
Report a source correction → · Return to inquiry checklist ↑
No reviewed model or batch reports are available. Independent verification is not implied.