BearingIndex
THE BEARINGINDEX DIRECTORY

OUY

Zhejiang Ouyi publishes OUY linear guides, shafts, sliding units, ball screws, followers and spherical joints. The actual SFU drawing identifies flange-hole arrangements, an oil port and screw/nut interfaces. Source a controlled motion assembly, using published family and comparison resources as starting points rather than automatic interchange approval.

OUY · LINEAR MOTION, SCREW AND JOINT INTERFACES

Make the mounting drawing the centre of your motion-component order.

Zhejiang Ouyi Bearing Manufacturing Co., Ltd. (浙江欧亿轴承制造有限公司) identifies its OUY brand and establishment on 1 August 2006. Its range connects guides, linear bearings, shafts and sliding units with ball screws, stud followers and spherical joints. Choose the actual motion task first, then ask for the exact matched parts and controlled interfaces. Official company scope [1]

Prepare a sourcing inquiry
01

The SFU drawing is an interface checklist, not a complete axis specification.

The SFU detail’s actual specification image shows flange-hole arrangements, screw diameter d, nut diameter D, W/A/H/B/L dimensions and an oil hole Q. It depicts six- and eight-hole arrangements in separate drawing views. Preserve the supplier’s drawing variant and do not choose a nut housing by screw diameter alone. Actual SFU drawing viewed in browser [2]

Interface to freezeInformation to sendConfirmation needed
Nut flangeHole count, position, threaded/through form and mounting envelopeExact selected drawing and housing clearance.
Oil accessPort orientation, fittings and maintenance accessLubricant and delivery/interval instructions for the installed nut.
Screw endsJournals, shoulders, threads, keyways and support arrangementControlled machining drawing, runout and included bearings/retaining parts.

Ouyi publishes DFU and SFI separately from SFU. Compare the actual nut construction and dimensions; do not assume they share mounting, preload or accuracy. Give diameter, lead, helix, total/active lengths, travel, load, speed/acceleration and orientation, then request the selected screw/nut pair’s accuracy, backlash/preload and permissible-duty review. DFU publication [3] SFI publication [4]

Define whether the quote includes only the screw/nut, end machining, housing, fixed/support bearings, coupling or complete module. Agree the bill of materials and who checks running torque, alignment and travel after assembly. The product photographs and family names do not establish a ready-to-install machine axis.

02

Use comparison resources to start a drawing review.

The official range includes profile guides, round guides, linear sleeves, flanged/long variants, sliding units and linear modules. Ouyi also publishes a page titled Ball Bushing Comparison List with linked comparison documents. A comparison-resource heading is not a verified dimensional or performance equivalence for a particular replacement. Ask for the relevant source row and both manufacturers’ controlled drawings before substitution. Actual comparison-resource page [5] Company product scope [1]

Round-shaft motion

Specify shaft material, hardness, finish, diameter/straightness and support span; define sleeve length, closed/open/flanged form, housing fits and retention. Provide loads/moments, bearing spacing and travel. Agree clearance, alignment and running-resistance checks on the actual shaft pair.

Profile guide or module

Identify exact rail/block pair, assembly height, mounting holes, rail length/end-hole positions, block count and mounting datums. For a module include drive/support components and travel limits. Request accuracy, preload, load/moment and lubrication data for that configuration.

For a rod end, radial spherical bearing or hydraulic-cylinder eye, provide thread/eye/housing geometry, articulation, load spectrum and lubrication or lining requirements. Do not apply a linear-sleeve comparison or motion-axis calculation to an articulating joint.

03

Request the measurement plan that supports the proposed assembly.

The company describes management against GB/T19001-2016 and ISO9001:2015. Request a current certificate with legal entity, site, scope and issuer status when required; a statement about the system is not a batch inspection report or installed-machine approval. The reviewed detection-equipment page currently says no information, so obtain the actual equipment, calibration and test plan directly rather than inventing an equipment list. Management-system wording [1] Actual detection page [6]

A report on the Ministry of Commerce-hosted China IPR website names Ouyi among enterprises in the Lishui rolling-functional-component intellectual-property alliance. This corroborates the named alliance context; it does not certify the offered part, demonstrate ownership of a particular design or establish permission to copy a replacement. Request order-relevant drawings and any necessary source/rights documentation. Government-hosted alliance report actually read [7]

  1. Approve component evidence. Agree material, dimensional/fit checks, lead/rail accuracy, clearance/preload and running-torque or articulation results as applicable.
  2. Test the actual assembly. Define loads, travel, speed, repeatability, temperature and endurance criteria on the intended installation.
  3. Freeze serial configuration. Record paired components, machining/drawing revisions, lubrication and lot marking; require approval before source, material, process or assembly changes.

The broad application list includes food, pharmaceutical and aerospace contexts. It does not establish food-contact, medical or flight qualification. Obtain the programme-specific evidence appropriate to the actual machine and component. Ask for model-specific production and sample schedules.

04

Agree the documents and support that come with the order.

The service page promises use instructions, conformity documents, technical parameters, training and a customer technical file. Turn those statements into an agreed delivery list: the exact drawing/manual revision, inspection records, lubrication/installation procedure, training format and timing, warranty terms and complaint evidence. Do not infer unlimited on-site commissioning or a numerical response time from the general promise. It separately publishes sales 0578-2175665 and technical support 0578-2175408. Actual service and support scope [8]

The dedicated contact gives 701 Jiangnan Road, Lishui Economic and Technological Development Zone, 13857066602, domestic email [email protected] and international email [email protected]. Confirm the current audit/receiving location, contracting entity and engineering owner, then send the complete drawing, duty and acceptance plan through the appropriate route. Dedicated domestic/export contact [9]

Request a quote tied to the approved components and machining scope, with sample qualification, serial lead time, packing and change controls. Keep technical confirmation with the order so sales and inspection use the same requirements.

YOUR NEXT STEP

Prepare an OUY motion or joint assembly enquiry

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

0 model records

No documented models yet.

Try broader requirements, or explore the manufacturer’s published product scope.

Explore manufacturers →

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Official company textOuyi · company introduction ↗

    OUY identity,2006establishment, product/application and management-system claims; current documents required.

  2. Official detail and actual specification image viewedOuyi · SFU ↗

    Flange and nut dimensions/oil-hole drawing; no unread linkedPDF numeric rows or machine-duty claims.

  3. Official catalogue detailOuyi · DFU ↗

    Separate published screw family; exact nut/preload interfaces require confirmation.

  4. Official catalogue detailOuyi · SFI ↗

    Separate screw family; no automatic SFU/DFU interchange.

  5. Official page actually readOuyi · ball-bushing comparison-resource page ↗

    Published comparison resources; linkedPDF retrieval failed, no specific equivalence claimed.

  6. Official actual pageOuyi · detection equipment page ↗

    No information currently displayed; not evidence of absent equipment or a calibrated test capability.

  7. Government-hosted report actually readChina IPR website · Lishui alliance report ↗

    Ouyi named in rolling-functional-componentIPalliance; not product certificate or SKU-specific rights confirmation.

  8. Official service textOuyi · service and technical support ↗

    Document/training/support claims and2175408technical line; agree order-specific delivery/warranty.

  9. Official contact textOuyi · dedicated contact ↗

    Jiangnan701, sales/mobile and distinct domestic/export emails.

Report a source correction → · Return to inquiry checklist ↑

OUY published product scope reviewed

The manufacturer website describes linear motion bearings and joint-bearing components.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:33

Source documentation retained for editorial review.