BearingIndex
THE BEARINGINDEX DIRECTORY

Paragon

Paragon / Ningbo Bainuoken: a ball-bearing sourcing guide separating envelope dimensions, special geometry and qualification evidence.

PARAGON · NINGBO BAINUOKEN

Start with the geometry that changes the assembly.

Ningbo Bainuoken Bearing Co., Ltd. identifies itself as a precision ball-bearing manufacturer, including single-row, double-row, four-point-contact and stainless designs. Its introduction gives an overall bore range of 3–95 mm and outside-diameter range of 7–120 mm. Company introduction [1] These are company-wide envelope statements: they do not establish that every listed construction covers every size combination.

Prepare a sourcing inquiry
01

Use Paragon’s product routes to ask the right first question.

The official bearing page lists non-standard, flanged, full-complement, inch, angular-contact, stainless, retaining-ring, four-point-contact, deep-groove and double-row categories. [2] That variety is more useful than a single “precision bearing” label. Our suggested RFQ distinctions are below.

Flange or retaining-ring location

If the housing locates the bearing through a flange or ring, send the relevant section drawing, shoulder dimensions and permitted axial movement. Ask for flange or groove geometry and the supplied retaining-ring arrangement. Matching bore and outside diameter alone may leave the locating interface incompatible.

Inch or non-standard dimensions

State units explicitly and include the full drawing revision. Specify which dimensions and interfaces must stay unchanged. Ask Paragon to identify the offered design rather than translating a measured dimension into a nearby metric designation.

Angular-contact, four-point or double-row construction

Describe load direction, required shaft location and the mounting arrangement. Ask for the contact design, allowable assembly conditions and any preload or matching instructions for the proposed part. The category names do not make these constructions interchangeable.

Full-complement or stainless request

For full-complement products, confirm the internal construction and its operating limits. For stainless products, specify the environment and ask for the ring/ball material designations, lubricant and closure. Do not read the material category as a universal corrosion or speed guarantee.

The reviewed product page primarily presents category names and photographs. It does not provide a complete numerical model table for these routes. A photograph is not sufficient to approve dimensions, load rating, precision class or interchangeability.

02

Move from a product photograph to an approval package.

Paragon’s inspection page is an equipment-photo gallery with a second page of images. The reviewed gallery does not attach a calibrated equipment register, named test procedures or a customer batch report to those pictures. [3] Treat it as the manufacturer’s facility presentation, then obtain evidence for the properties your design needs.

  1. Define the offered part

    Request the complete designation and drawing. Confirm which category it belongs to, materials, closures, clearance and any special location or contact features. Mark each proposed deviation from the original assembly.

  2. Agree a specific test package

    Ask which drawing characteristics will be measured and by what method. For running accuracy or acoustic requirements, agree the measuring conditions and limits. Obtain material or heat-treatment records where required; an equipment image cannot replace a product result.

  3. Approve the installed sample

    Record the tested drawing revision and variant. Verify locating geometry, assembly procedure and the actual duty before approving serial supply. Agree how the accepted sample and inspection results will connect to delivery lots.

The parts page is a separate evidence gap

The official navigation includes bearing components, but the reviewed parts page provides no readable component specification. [4] For a ring, cage or other component-only purchase, ask for an explicit quotation and drawing; do not assume every photographed finished bearing establishes component availability.

03

A dated company record helps identify the supplier; it does not qualify your bearing.

The official footer names Ningbo Bainuoken Bearing Co., Ltd. and gives No. 295 Weiyi West Road, Andong Industrial Park, Ningbo Hangzhou Bay New Area. [1] Ningbo’s 2024 first-batch technology-based SME list separately includes the Chinese legal name 宁波百诺肯轴承有限公司 with entry number 2024330282A8001188. [5] This is a dated government company record, not a bearing-performance approval or confirmation of its current status in that programme.

The company introduction mentions quality and environmental certification history, and gives factory-area, line-count and annual-capacity statements without a clear current reporting date. [1] Request the current certificate, issuer, validity and manufacturing-site scope if they are requirements of your purchase. Ask separately for the offered quantity and delivery window rather than relying on the corporate scale figures.

Does the published application list establish aviation or medical qualification?

No product-level approval has been reviewed here. An application or industry mentioned on a company website should lead to a discussion of the exact component, applicable customer requirements and supporting records. It does not establish qualification for a regulated or safety-critical application.

How do I keep the contract aligned with the technical approval?

Ask the quotation to name the manufacturing and contracting entity, accepted drawing and variant, inspection deliverables, quantity and dated commercial terms. For a special geometry, make the approved flange, groove or contact arrangement part of the controlled specification.

YOUR NEXT STEP

Prepare a Paragon geometry-led inquiry.

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

0 model records

No documented models yet.

Try broader requirements, or explore the manufacturer’s published product scope.

Explore manufacturers →

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Manufacturer publicationParagon · company introduction and contact footer ↗

    Identity, overall size envelope, construction examples and address. Undated capacity and historical certificates are not current order evidence.

  2. Manufacturer catalogueParagon · bearing categories ↗

    Published bearing-family labels and photographs; no complete model-specific specification table reviewed.

  3. Manufacturer photo presentationParagon · inspection-equipment gallery ↗

    Equipment imagery, not a calibrated asset register, audited factory or product test result.

  4. Manufacturer pageParagon · bearing-components page ↗

    Navigation route reviewed; no readable component specification obtained, so component supply remains a direct inquiry.

  5. Dated government listNingbo Science and Technology Bureau · 2024 first-batch technology-based SMEs ↗

    Named company and 2024 programme entry; not current programme validity or product qualification.

Report a source correction → · Return to inquiry checklist ↑

Paragon published product scope reviewed

The manufacturer website describes precision ball and thin-section designs.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:33

Source documentation retained for editorial review.