BearingIndex
THE BEARINGINDEX DIRECTORY

QXZ

Anhui Qianxi identifies QXZ fan insert bearings and publishes separate insert and housed-unit families. Buy against the complete bearing/locking/housing configuration, not a UC200 or UCP200 family label. Its high-temperature, high-speed and low-noise positioning needs numerical duty-specific qualification, while the reviewed honour image is a dated brand award rather than a management-system certificate.

QXZ · FAN INSERT BEARINGS AND HOUSING INTERFACES

Specify the insert, locking arrangement and housing as one fan-bearing system.

Anhui Qianxi Precise Bearing Manufacturing Co., Ltd. (安徽千禧精密轴承制造有限公司) publishes QXZ fan insert bearings, low-noise deep-groove bearings and automotive precision-bearing positioning from Qianshan, Anhui. Its fan description emphasises high temperature, speed and low noise without numerical conditions in the reviewed text. Start with the complete installed configuration and agree measured limits for the actual duty. Actual QXZ company and fan publication [1]

Prepare a sourcing inquiry
01

A bearing insert enquiry and a housing-unit enquiry need different drawings.

The actual site separates insert families UC200, UC300, UK200 and UEL200/300 from housed-unit entries including UCP200, UCF200, UCFL200 and UCFC200. Identify whether you need the bearing alone or an assembled unit, then freeze the complete model and included locking/mounting parts. Do not assume a family label supplies every bore, housing or accessory. Actual family inventory [2] Actual UC200 detail [3] Actual UK200 detail [4]

The actual UCP200 detail contains a pedestal-unit drawing labelled d 12–140 mm, with shaft-centre height h, mounting-hole spacing e, overall length L, base width B and insert width Bi. That is a family drawing/range, not an individual UCP200 model’s dimensions. Use it to identify the interfaces your replacement must preserve, then request the exact dimension sheet. Actual UCP detail and drawing viewed in browser [5]

Supply routeBuyer informationApproval question
Insert onlyFull marking, shaft size/fit, locking arrangement, outer seating profile and current housing.Will the candidate preserve fit, locking, seal/lubrication and seating in the existing housing?
Complete pedestal/flange unitComplete unit drawing, centre height, bolt interface, space limits and base/frame geometry.Which exact insert, housing material/design, locking parts and mounting accessories are included?
Change of insert familyCurrent locking and shaft arrangement, direction/reversal duty and service access.What shaft/mounting changes and validation are required for the proposed complete locking system?

The reviewed UC and UK details are primarily family/photo references rather than full dimensional/load sheets. Obtain the complete controlled construction before treating UC, UK or UEL alternatives as interchangeable. The displayed 0.00 market/price fields are template entries, not a commercial quotation. Actual UC price/detail fields [3] Actual UK detail fields [4]

02

Turn the fan positioning into a numerical acceptance agreement.

The company says its QXZ fan insert bearings can work for extended periods with low noise under high-temperature and high-speed conditions. The reviewed description does not provide a maximum bearing temperature, permissible continuous speed, acoustic limit or guaranteed life. Provide the actual fan duty and request an engineering proposal with those conditions stated. Actual fan-performance wording [1]

Define the installed duty

State belt or direct drive, radial/axial loads, speed and start/stop or reversal cycle, shaft/frame alignment, measured ambient and bearing temperatures, grease/service access and dust/moisture exposure. Include the complete support arrangement and housing interfaces.

Define the measured result

Agree cold/hot starting and running torque, temperature rise, locking retention, sealing/lubrication performance and the fan’s required acoustic/vibration result. Specify units, measurement position/fixture, speed/load, duration and pass limits.

Ask for the complete bearing material/heat treatment, cage, clearance, seal and grease/fill configuration and its permissible duty. Validate the exact assembled fan rather than using a generic “quiet” description as a vibration grade or equipment-noise guarantee. Agree repeat-lot checks and approval before any material, lubricant, seal or process substitution.

If the enquiry instead concerns the published low-noise deep-groove or automotive route, identify that position explicitly and request its own candidate data and qualification. The fan claim does not establish every catalogue item’s temperature or automotive approval. Actual distinct product positioning [1]

03

Keep association identity and brand awards separate from technical qualification.

The China Bearing Industry Association’s actual member-list page names Anhui Qianxi Precise Bearing Manufacturing Co., Ltd., postal code 246300, Wanshui South Road in the Qianshan development zone, and a listed date of 2013.11. This helps corroborate the company identity; membership does not approve an individual bearing, manufacturing process or buyer application. Actual association member list, page11 [7]

The company introduction describes ISO 9001 process control and testing/grinding equipment. Obtain a current original system certificate and check entity, site, scope and issuer status. Request the ordered model’s control plan, calibrated measurements and traceable material/heat-treatment, dimensional, clearance and relevant functional lot reports. Broad process language does not supply those records. Actual quality-control description [1]

The honour entry labelled “qualification certificate” links to an actual image of a 2019 Anhui electromechanical-industry brand award, viewed during this review. It is a dated brand honour, not an ISO management-system certificate. The honour page also lists credit, membership and patent entries; those categories do not establish candidate load/speed or life acceptance. Request each document relevant to your approval by its actual issuer, scope and current status. Actual honour publication and enlarged award image [6]

  1. Approve the exact sample configuration. Record insert, housing, locking, lubricant and drawing revision.
  2. Validate the installed duty. Review component reports and perform the agreed fan or machine trials.
  3. Release controlled serial supply. Agree lot identification, inspection records, change notification and remedies for a nonconforming delivery.
04

Confirm the receiving address and request an identified engineering owner.

The official publication gives +86-556-8822077 / 8820277, mobile 18900562222, and a factory address on Wanshui Road in the Qianshan development zone, Anhui. The association lists Wanshui South Road. Confirm the full current street number, gate and sample/audit receiving address before shipping or visiting. Actual official contact/footer [2] Actual association address [7]

Send the incumbent insert and unit markings, complete interface drawing and fan duty. Ask for an engineering owner, the exact proposed configuration, unresolved technical inputs, sample tests and approval schedule. Confirm the contracting/invoicing entity, included housing/locking parts, quantities, quoted price, allocated lead time, packing, warranty and change-control terms. The webpage family inventory is not evidence of stock or a promised delivery date.

YOUR NEXT STEP

Prepare a QXZ fan insert or housed-unit enquiry

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

0 model records

No documented models yet.

Try broader requirements, or explore the manufacturer’s published product scope.

Explore manufacturers →

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Official actual HTTP textQXZ · actual company introduction ↗

    Fan insert/quiet deep-groove/automotive positioning and quality-control description; no numerical duty or current certificate confirmation.

  2. Official actual HTTP contentQXZ · official home, families and contact ↗

    Separate insert/housed families, phones and Wanshui address; family inventory not stock or quote.

  3. Official actual family/photo detailQXZ · UC200 detail ↗

    UC family reference and0.00template fields, no exact candidate ratings.

  4. Official actual family/photo detailQXZ · UK200 detail ↗

    Separate UK reference; full locking/construction requires controlled sheet.

  5. Official actual page and drawing viewed in browserQXZ · UCP200 detail and pedestal drawing ↗

    UCPfamilydrawing d12–140mm andh/e/L/B/Biinterfaces, not individual-unit specification.

  6. Official actual text and linked image viewed in browserQXZ · honours and actual qualification-labelled image ↗

    Linkedimage is2019brandaward, notISOcertificate; other honour labels not product acceptance.

  7. Primary association HTML actually readChina Bearing Industry Association · members page11 ↗

    Named company,246300,WanshuiSouthRoad,2013.11listed date; identity/membership only.

Report a source correction → · Return to inquiry checklist ↑

QXZ published product scope reviewed

The manufacturer website describes insert bearings and low-noise ball bearings.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:33

Source documentation retained for editorial review.