Sanxiong
Sanxiong describes an integrated forging, ring-turning and grinding/assembly supply chain with several production sites. Define the delivery stage and responsible site, separate component inspection from finished-bearing acceptance, and obtain engineering specifications for its broadly titled pump-shaft or clutch products.
Define which manufacturing stage your order is buying.
Zhejiang Xinchang Sanxiong Bearing Co., Ltd. describes forging, turning and grinding/assembly within its bearing supply chain. Its company introduction identifies headquarters and separate forging, CNC, spherical-joint and automotive-component sites. Start by specifying whether the purchase is a forging, machined ring, shaft/component or finished bearing, and establish the responsible manufacturing and release site. Actual manufacturer supply-chain and site description [1]
A machined ring and a finished bearing need different acceptance plans.
| Your intended purchase | Define before quotation | Evidence at delivery |
|---|---|---|
| Forging or ring blank | Material, blank geometry, manufacturing route, required treatment and the delivery condition. | Material/heat identity, blank dimensions, agreed surface/defect checks and traceability to the supplying site. |
| Turned or further machined ring | Datum scheme, finished/unfinished surfaces, tolerances, allowances and the operations still required. | Drawing-linked measurement results and material/process identity; define preservation and protection of critical surfaces. |
| Complete bearing or assembly | Full designation, component set, clearance, lubrication, mounting interfaces and actual duty. | Final dimensional/assembled-function and agreed application validation, linked to the finished lot. |
These are buyer-defined procurement routes based on Sanxiong’s published forging/turning/grinding/assembly focus. Ask which stages the manufacturer actually offers for your drawing; a general capability paragraph does not establish that every listed operation or final assembly is included in your price. Actual integrated-process description [1]
Trace the ordered part through the actual internal and external route.
The introduction names headquarters with hydraulic/cold-rolling workshops, Daxiong forging, Taixiong CNC, Nanmen Lianke spherical-joint operations and Shaoxing Sanxiong automotive parts. Treat these as manufacturer-described production roles; do not presume a single certificate or inspection record applies across all five. Actual five-site statement [1]
The technical page separately states that it has its own IATF16949-certified forging facility and that the listed high-forging supply comes from Baojie. This is a specific external-supply disclosure, not proof of a completely internal route for every item. The exact operation, material source, facility identity and certificate scope for your part still need confirmation. Actual technical-page internal/external forging statements [2]
- Map the drawing to the sites. Ask who forges, turns, treats, grinds/assembles and inspects the ordered part. Identify the legal seller and manufacturing/release entities.
- Link transferred lots. Require material/heat and operation/batch identity to remain linked when parts move between facilities or an external processor. Specify incoming verification at each critical transfer.
- Agree change control. Define approval before changing source, processor, drawing revision or process, and establish nonconformance/rework and final-release responsibility.
Obtain current original certificates and issuer status for the relevant entities/sites. The introduction’s ISO9001:2008, ISO/TS16949:2009 and ISO14001:2004 statements are historical editions, not independently verified current certification.
An equipment list is a way to ask better inspection questions.
The technical page identifies Zeiss coordinate measurement, fluorescent magnetic-particle inspection, a Mahr contour instrument, online inspection and an automatic contour comparator. These actual equipment descriptions help a buyer frame qualification questions; they are not measured results for an offered lot. Actual metrology/NDT and online-equipment publication [2]
Geometry and machining stage
Identify critical diameters, faces, shoulders and contours with the correct datums. Agree method, calibrated equipment, tolerance, sampling/every-piece scope and record format. For an unfinished ring, distinguish machining allowance from a finished tolerance.
Material and defect acceptance
Specify the required material/treatment and defect criteria. If magnetic-particle inspection is required, agree the applicable procedure, covered surfaces and rejection standard, then request the order-linked result and release decision. The machine’s presence does not establish universal inspection coverage.
For a complete product, add clearance, assembly, sealing/lubrication and application-function acceptance as required by your controlled specification. This directory has not performed a factory audit, inspected a material/treatment report or accepted a production lot.
The product labels leave essential assembly requirements open.
The actual water-pump-shaft and clutch detail pages identify their respective categories but do not provide readable model, dimensions or numerical operating specifications in the inspected product-detail text. A generic “clutch” title does not establish its actuation, electrical requirements or a complete automotive application. Actual water-pump-shaft record [3] Actual clutch record [4]
For a pump-shaft enquiry
Show the impeller/drive/seal interfaces and bearing supports, datum and runout requirements, material and treatment, surfaces remaining to be processed and supplied-component scope. State speed/load, fluid/leakage exposure and temperature. Require the offered drawing and installation/validation plan; no pump fit or life is inferred from the photograph.
For a clutch enquiry
Describe the required actuation and mating assembly, torque/speed and engagement duty, envelope/interfaces, temperature and acceptance. If the proposed design is electromagnetic, confirm voltage/current, coil/connector, air gap and thermal validation on the specific item. Do not assign electrical parameters simply because the site’s general heading mentions electromagnetic clutches.
Send these technical questions to the responsible engineering team and ask for a controlled candidate drawing, sample costs and development/production schedule.
A published ring project quantity is not available finished-bearing capacity.
The manufacturer published an environmental-impact-report notice on 2024-10-30 for a project titled 50 million bearing rings per year. This review read the actual notice and identified its linked report; the report download returned HTTP403, so the full report was not examined. The project title does not establish approval, completed commissioning, today’s available ring output or an equivalent number of finished bearings. Actual dated project notice and linked report [5]
The actual CBIA statistics page also lists 浙江新昌三雄轴承有限公司. Its rendered heading was August 2026 despite the requested historical URL. Only company presence is used here; no ranking, growth percentage, quality grade or capacity is inferred from the inconsistent date route. Actual rendered industry-association record [6]
The dedicated contact page gives No. 881 Dadao East Road, Xinchang, Zhejiang, [email protected], sales +86 575 86175056 and technical +86 575 86175052. Some product/news footers display a different sales number; use the dedicated contact block as a lead and confirm the responsible team/current route directly. No enquiry was sent. Actual dedicated sales/technical contact record [7]
Agree the exact legal seller, drawing/process site, present sample/production milestones, MOQ and commercial terms for your part. General output or supplier/customer claims do not reserve capacity or prove authorization.
Prepare a Sanxiong manufacturing-stage and release brief
Tick what you have ready. Copy the full checklist with its current status for your procurement notes.
Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.
Documented models.
0 model recordsNo documented models yet.
Try broader requirements, or explore the manufacturer’s published product scope.
Explore manufacturers →Evidence, with boundaries.
Our review approach →Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.
- Official manufacturer publicationSanxiong · actual company and five-site introduction ↗
Integrated process and named site roles; historical standard editions/scale/customer statements not current independent qualification.
- Official page, actual browser text checkedSanxiong · technical advantages and inspection equipment ↗
Own forging and external Baojie supply statements plus metrology/NDT/online equipment; not universal in-house processing or batch results.
- Official actual product pageSanxiong · actual water-pump-shaft detail ↗
Named component route; no readable model/dimensional/rating specification obtained or invented.
- Official actual product pageSanxiong · actual clutch detail ↗
Clutch route only; no electrical/torque/vehicle specification inferred.
- Actual manufacturer project publicationSanxiong · 2024 ring-project report notice ↗
2024-10-30 title50million rings/year; linked PDF download403 and not read, no approval/commissioning/current-output claim.
- Actual industry-association publicationCBIA · actual rendered enterprise statistics record ↗
Company presence only; rendered August2026 heading differs from URL date, no ranking/quality/available-output inference.
- Official actual sales/technical contactSanxiong · dedicated contact page ↗
Dadao East881, email and dedicated department numbers; other footer difference requires direct confirmation.
Report a source correction → · Return to inquiry checklist ↑
No reviewed model or batch reports are available. Independent verification is not implied.