BearingIndex
THE BEARINGINDEX DIRECTORY

Shengjie

Zhejiang Lishui Shengjie publishes round shafts, profile guides and blocks, ball screws, linear bearings and nuts, alongside machining-centre and CNC-lathe services. Define whether the order is a catalogue component, a machined part or a matched motion assembly, with clear responsibility for material, finishing and acceptance.

SHENGJIE · LINEAR COMPONENTS AND MACHINING SCOPE

Define the part, the machining and the assembly responsibility.

Zhejiang Lishui Shengjie Bearing Manufacturing Co., Ltd. (浙江丽水盛杰轴承制造有限公司) describes linear-motion bearings, guides, flanged units, shafts, rod ends and stud-type needle rollers. Its website separately presents a machining centre and CNC-lathe work. A useful enquiry should distinguish catalogue supply from machining to the buyer’s drawing and from a complete matched motion assembly. Official company scope [1] Machining service [4]

Prepare a sourcing inquiry
01

Decide what Shengjie must deliver before comparing quotations.

Procurement routeActual published scopeSpecification to agree
Round-shaft componentWC, WCS and WCAS appear on the round linear-guide/shaft detail.Exact shaft form, material/hardness, finish, diameter/straightness, length, end features and support interfaces. Actual shaft family page [2]
Profile guide and blockHSR…CR/HR and HSR…CA/CB are separately named in the catalogue.Exact matched rail/block configuration, envelope and holes, rail length/end-hole positions, accuracy and preload. Actual CR/HR detail [3] Company range [1]
Machining to drawingSeparate machining-centre and CNC-lathe pages.Controlled drawing, datums, tolerances, material supply, treatment/finishing responsibility and inspection report. Machining centre [4] CNC-lathe service [5]

The actual CR/HR specification image makes the distinction concrete: HSR30CR lists W 60 mm, L 103 mm and M 45 mm, while HSR30HR lists W 60 mm, L 125 mm and M 42 mm. Matching the nominal family and width does not preserve the block length or stated height. Confirm these supplier-published rows against the current full assembly drawing. Actual specification image viewed in the official page [3]

The reviewed catalogue details identify families but do not provide a complete controlled specification for a selected configuration. Obtain the actual current drawing and parameter sheet. Similar HSR designations do not establish permission to mix this supplier’s blocks with another manufacturer’s rail, nor a particular load rating or positioning result.

For machining work, confirm whether the buyer supplies a blank or Shengjie sources it; identify all operations included in the quote. Agree who controls heat-treatment distortion, final datum machining, burr removal, surface protection and final inspection. Workshop images do not supply a numerical tolerance or machine-capacity commitment.

02

Make the guide, shaft and screw interfaces one controlled bill of materials.

Round shaft and linear bearing

Define shaft supports and span, sleeve/block form, retention and housing fit. Give bearing spacing, travel and load/moment direction. Request matched-fit and running-resistance checks on the intended shaft, rather than selecting on bore diameter alone.

Profile guide and screw-driven axis

Provide rail/block mounting datums, assembly height, stroke and carriage envelope. For the screw include diameter/lead, nut type, accuracy/backlash or preload, end machining, supports, coupling and drive interfaces. Identify all items included in the assembly quote.

The official navigation separates ball screws, linear guides, linear bearings and nuts. Do not assume a screw quote includes its nut, supports or drive components. Assign responsibility for the complete axis’s alignment, travel, running torque and positioning/representative-duty checks. Official product navigation and scope [1]

  1. Approve interfaces. Freeze drawings, matched parts, datums and machining scope before sample manufacture.
  2. Test the intended duty. State load/moments, travel, speed/acceleration, orientation, temperature and contamination; agree permissible-duty and lubrication requirements.
  3. Release repeat supply. Require lot-linked measurements, configuration marking and approval before material, source, treatment or assembly changes.

Company application lists for woodworking, packaging, plastics, carving or fitness machinery help describe the market. They do not approve an individual axis for a safety or accuracy requirement. Obtain the buyer’s machine-specific evidence and integration review. Actual application description [1]

03

The anti-vibration guide patent describes a particular mechanism.

Patent publication CN211648789U, dated 9 October 2020, names Shengjie as original applicant and describes a guide structure using an adjustable threaded tube, retaining ring, inserted rod and spring to urge a ball holder towards the guide. Its claims also describe lubrication passages and a buffered stop. This is evidence of a specific disclosed design, not proof that every published HSR guide uses it or achieves a measured vibration reduction. Actual patent abstract and claims [6]

If vibration or shock matters to the machine, request the proposed unit’s actual construction, stiffness/preload, mounting requirements and test conditions/results. Define acceptable vibration, displacement and wear under the real duty. Do not use the patent title as a seismic qualification or lifetime guarantee. The database’s legal-status label has not been independently verified here.

The company describes production against international standards and inspection equipment without publishing a full order-specific approval package in the reviewed company text. Request the exact applicable standard, current certificate if required, manufacturing site, inspection/calibration evidence and lot traceability. General statements about equipment do not replace a controlled inspection plan. Official quality and equipment descriptions [1]

04

Use the dedicated contact and keep fax separate from the enquiry phone.

The actual contact page lists 256 Shiniu Road, Shuige Development Zone, Liandu District, Lishui; telephone 0578-2709968; mobile 13059676772; email [email protected]. It labels 0578-2709938 as fax. Confirm the current contracting, manufacturing/audit and receiving location through the responsible contact. Dedicated contact fields [7]

Send the complete motion or machining drawing package, quantities and duty, together with the required inspection and sample-approval plan. Ask for an itemised quote, material/process responsibility, current drawing revisions, sample and serial schedule, packing/corrosion protection and change/warranty terms. Keep engineering approval linked to the order so the machined interfaces and bought components are inspected against the same specification.

YOUR NEXT STEP

Prepare a Shengjie component or machining enquiry

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

0 model records

No documented models yet.

Try broader requirements, or explore the manufacturer’s published product scope.

Explore manufacturers →

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Official company page actually readShengjie · company introduction ↗

    Product/application and general production/inspection descriptions; no specific current certificate or model performance inferred.

  2. Official actual catalogue detailShengjie · WC/WCS/WCAS shaft series ↗

    Named round-shaft families; no unreviewed shaft-image values claimed.

  3. Official actual catalogue detailShengjie · HSR CR/HR guide family ↗

    Separate CR/HR and linked CA/CB families; actual CR/HR image viewed for HSR30CR/HR width, length and height, controlled approval still required.

  4. Official actual service pageShengjie · machining centre ↗

    Published machining-work category and photographs; no numerical tolerance or capacity inferred.

  5. Official actual service pageShengjie · CNC-lathe machining ↗

    Distinct machining service; order-specific material/process/inspection scope required.

  6. Actual published patent text and claimsCN211648789U · guide structure with anti-vibration function ↗

    2020-10-09 disclosed adjusting/spring/holder and lubrication mechanism, original Shengjie applicant; no current legal status or catalogue-wide implementation verified.

  7. Official contact actually readShengjie · dedicated contact ↗

    Shiniu256, phone/mobile/email;2709938 specifically fax.

Report a source correction → · Return to inquiry checklist ↑

Shengjie published product scope reviewed

The manufacturer website describes linear bearings and guided-motion assemblies.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:33

Source documentation retained for editorial review.