BearingIndex
THE BEARINGINDEX DIRECTORY

W&Z

Taizhou Wuzhou, branded W&Z, publishes bearings for motors, pumps, sewing machines, motorcycles, electric vehicles and automotive air-conditioning. Its public technical references include clearance and cage guidance, but some old parameter tables are unavailable as images. Obtain the current complete model sheet and validate noise, torque, temperature and sealing in the actual equipment.

W&Z · MOTOR BEARINGS, CLEARANCE AND APPLICATION ACCEPTANCE

Specify the motor duty before accepting a W&Z bearing substitute.

Taizhou Wuzhou Bearing Co., Ltd. (台州五洲轴承有限公司) says it was established in 2001 and uses the W&Z trademark. Its published scope covers motor, pump, sewing-machine, motorcycle, electric-vehicle and automotive air-conditioning bearings, plus a double-groove series. Select the actual bearing position and construction before comparing basic designations or product photographs. Actual company and application scope [1]

Prepare a sourcing inquiry
01

Turn the equipment name into a complete bearing requirement.

The company’s application list spans several different machines. “Motor bearing” alone does not identify the necessary seal, clearance, lubricant, accuracy or acceptance conditions. The product gallery largely labels photos with numbers rather than complete model specifications; use the supplier’s current drawing to establish what is actually being quoted. Published application families [1] Actual numbered product gallery [2]

Enquiry routeProvide with the drawingAgree before approving
Motor supportLoads, starting/reversing cycle, speed, shaft/housing fits, temperature, existing axial support and noise target.Clearance after assembly, lubricant/seal construction, torque and actual motor vibration/acoustic acceptance.
Pump or wet environmentBearing position, exposure/contamination path, loads, temperature and existing lubrication/sealing system.Candidate construction and relevant ingress, grease-retention, temperature and endurance checks.
Sewing-machine or compact mechanismComplete incumbent marking, envelope/shoulders, operating cycle and allowable torque or movement.Drawing equivalence and performance in the assembled mechanism.
Vehicle or air-conditioning componentExact subsystem, drawing/OE reference, duty, traceability and customer approval requirements.Specific available product and validation package; an application category is not an OE fitment approval.

The technical directory lists 6000, 6200 and 6300 series references dated 11 August 2014. The 6200 detail’s parameter image did not load during browser review. Do not reconstruct dimensions, ratings or speed limits from the series title or another manufacturer’s table. Request the full current model designation, envelope, load ratings and rated-speed conditions from W&Z. Actual dated technical directory [3] Actual 6200 detail and unavailable table image [4]

02

Agree installed clearance and the complete cage/lubricant construction.

W&Z’s clearance reference explains that fit, speed and temperature change internal clearance and affect load distribution, friction, vibration and running accuracy. Supply the actual shaft/housing tolerances and hot/cold conditions. Agree the unmounted radial-clearance group and acceptable installed behaviour separately; the original bearing’s basic designation alone does not identify them. Actual clearance and cage guidance [5]

The same reference distinguishes J stamped-steel, TN glass-fibre-reinforced polyamide 6.6 and M/MA/MB brass cages. It gives generic temperature and speed comparisons. Ask which construction is actually available for the selected model and whether the cage, grease, seal and operating environment are compatible. The published TN temperature range or cage speed multiplier is not the permissible temperature or speed of every complete W&Z bearing. Actual cage table and its scope [5]

  1. Freeze the candidate. Record full designation, cage, seal/shield arrangement, grease identity/fill, accuracy and clearance on a controlled sheet.
  2. Review mounting effects. Confirm fits, shoulders, alignment, assembly force path and any axial support/preload with the equipment engineer.
  3. Measure the equipment result. Agree startup/running torque, cold/hot movement, temperature rise and vibration/noise under a defined duty.
  4. Keep production traceable. Link the accepted construction and inspection limits to each lot and require notice before changing grease, seals, cage or manufacturing process.

Write the noise measurement quantity, units, fixture, speed/load, frequency bands and pass limits into the test plan. Component vibration and installed equipment sound are separate results. A low-noise marketing description does not replace those records.

03

Use the historical sampling result at its actual model and batch scope.

China Quality News’s publication of the 2016 third-batch national supervision results lists Taizhou Wuzhou’s W&Z 6203-2RZ ZV2, P0, produced 25 April 2016, as qualified, with the National Bearing Quality Supervision and Inspection Center named as the testing institution. This is a specific historical sampled product result. It does not approve every W&Z model, a present order or a different clearance/noise configuration. Actual published sampling table, entry 43 [6]

The official technical-strength gallery labels life-testing, hardness and metallographic-analysis equipment, along with processing, assembly and packaging areas. Ask for the current applicable test capability and traceable results for your candidate or lot; a labelled equipment photograph is not an accredited test scope or a delivered-lot report. Actual facility and equipment gallery [7]

Before sample acceptance

Agree drawing revision, material/heat-treatment evidence, geometry/runout, clearance, seal/grease configuration and component test conditions. Identify the samples and record the actual equipment trial.

Before repeat production

Specify batch identifiers, inspection records, sampling and handling rules, current required system certificates and customer approvals. Freeze the approved construction and define the response to an out-of-limit lot.

04

Send drawings and audit requests to the correct site.

The dedicated contact page distinguishes production at No. 8 Jingnan Second Road, Jiangnan Development Zone, Linhai, Zhejiang from sales in Sanwang Village, Zeguo Town, Wenling. Confirm the current legal/contracting entity, exact factory and sample-receiving address before an audit or shipment. Do not substitute the sales address for the manufacturing site. Actual separate production and sales addresses [8]

The page names Mr. Wang, mobile 13958695588, national service telephone 400-8877-999, and telephone 0576-86940111 / 86940222. Ask who owns the drawing review and quality approval, then agree quote, sample versus serial quantities, schedule, packaging, warranty and the reports supplied with delivery. Actual dedicated contact details [8]

The home page and company introduction publish different annual output figures, 15 million and 30 million sets respectively. Neither establishes the capacity available for your order. Request the actual model’s manufacturing route, remaining validation and written delivery commitment. Actual home-page figure [9] Actual introduction figure [1]

The service page advertises around-the-clock telephone response and possible assembly-site attendance. Confirm the responsible engineer, geographical coverage, response time, cost and warranty/remedy terms in writing for your project. Treat the published promise as a support enquiry route, not an agreed service-level contract. Actual service commitments [10]

YOUR NEXT STEP

Prepare a W&Z motor or equipment-bearing enquiry

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

0 model records

No documented models yet.

Try broader requirements, or explore the manufacturer’s published product scope.

Explore manufacturers →

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Official actual company publicationW&Z · company introduction ↗

    2001 founding, trademark, application families and advertised figures; not current allocated capacity.

  2. Official actual numbered photo galleryW&Z · product gallery ↗

    Images do not establish complete model designation or controlled specifications.

  3. Official actual dated directoryW&Z · technical reference directory ↗

    2014 series/tolerance/fit/noise references; titles are not parameter evidence.

  4. Official detail also checked in browserW&Z · 6200 series detail ↗

    Dated11 August2014; embedded external table image failed to load, no numerical parameters extracted.

  5. Official actual technical text/tableW&Z · radial clearance and cage comparison ↗

    Fit/speed/temperature effects and cage categories; generic limits not universal product ratings.

  6. Actual quality-authority news publication of sampling tableChina Quality News · 2016 national bearing sampling results ↗

    Entry43, W&Z6203-2RZ ZV2 P0 produced25 April2016 qualified; historical model/batch only.

  7. Official actual equipment/facility labelsW&Z · technical-strength gallery ↗

    Life, hardness, metallography and production photos; not current accredited scope or lot report.

  8. Official actual manufacturing/sales contactW&Z · contact page ↗

    Separate Linhai production and Wenling sales addresses, Mr.Wang and phone details.

  9. Official actual home publicationW&Z · home page ↗

    Advertised output differs from introduction; current order capacity requires confirmation.

  10. Official actual support commitmentsW&Z · customer service ↗

    Telephone/assembly-site service positioning; actual coverage/terms require written agreement.

Report a source correction → · Return to inquiry checklist ↑

W&Z published product scope reviewed

The manufacturer website describes motor, pump and small machinery bearings.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:33

Source documentation retained for editorial review.