Wanda
Jiangsu Wanda Special Bearing traces its predecessor to the 1969 Rugao Bearing Factory and its company establishment to August 2001. The official catalogue separates forklift mast, side and chain rollers, combined rollers and slewing bearings. Its detailed MG table and historical public-transfer disclosure show why procurement must specify the track/chain interface, full designation and drawing-controlled requirements rather than treating reference numbers as universal replacements.
Order the roller for the mast and track, not just its bore diameter.
Jiangsu Wanda Special Bearing Co., Ltd. (江苏万达特种轴承股份有限公司) identifies its predecessor as the Rugao Bearing Factory founded in 1969 and the company establishment as August 2001. Its actual product catalogue distinguishes mast rollers, side rollers, chain pulleys and combined rollers, alongside slewing bearings. The useful procurement question is which controlled roller design fits the machine’s load path, track or chain and mounting arrangement. Official company history and scope [1]
Four catalogue routes need four different interface briefs.
| Actual published route | What the catalogue distinguishes | Buyer inputs that matter |
|---|---|---|
| Mast roller · MG | The viewed first category page lists several single-row ball MG branches with different dimensional tables. | Machine/mast model and roller location, rail section/working surface, outer-ring profile, mount, widths and actual load/duty. |
| Side roller · SR | Single-row ball, double-row ball, full-ball, housed, needle and roller types appear as separate branches. | Side-guidance layout, stud/shaft and housing interfaces, lateral force, adjustment and retained clearance across mast travel. |
| Chain pulley · CG | Single/double-row ball, full-ball and housed options have separate tables. | Exact chain type/dimensions, pulley working profile, chain path, mount, load and lift-cycle duty; do not substitute from a bearing bore alone. |
| Combined roller · CRA, CBB, CRC, CRB, CBA | Standard, nylon-slide-block, radial and different screw/bolt adjustment configurations. | Complete rail/roller pair, radial and side-guidance functions, adjustment access and mechanism, mounting and installation/maintenance instructions. |
These are the branches actually present on the reviewed category pages, not confirmation that every size is currently stocked. Mast-roller category [2] Side-roller category [3] Chain-pulley category [4] Combined-roller category [5]
For an existing machine, send the complete maker/mast identification, installed part markings and approved drawing. Photos and measured envelopes help identify a candidate, but worn components cannot by themselves establish original tolerances or approved interchangeability.
The MG25A1 table shows why width and suffix cannot be dropped.
The original MGxxA1-x single-row ball mast-roller detail is dated 9 June 2023. Its actual table and section drawing were read; the original drawing was loaded and visually checked in the browser. The drawing distinguishes outer-ring width C from inner-ring width B. The following two entries share a bore and outside diameter but differ in that width. Original MG detail, table and viewed section [6]
| Actual catalogue entry | Published dimensions d × D × C / B, mm | Published Cr / Cor, kN |
|---|---|---|
| MG25A1-2T | 25 × 80 × 22 / 17 | 17.22 / 11.39 |
| MG25A1-4T | 25 × 80 × 22 / 16 | 17.22 / 11.39 |
These are manufacturer catalogue references, not approval of either part for a particular forklift, rail contact or duty. The page has a “reference model” column; a cross-reference does not document every geometric, seal, clearance or material difference. The meanings of T, M2 and T1 suffixes were not established by this detail. Request their current definitions and a controlled complete drawing.
Confirm the bearing and mount
Approve bore/shaft fit, both ring widths, shoulders and retention, outer-ring profile, clearance, seal and grease. Identify which surface is inspected and the drawing revision controlling acceptance.
Confirm the roller and rail
Supply rail material, hardness, geometry, alignment and actual contact/duty. Ask the responsible engineer to validate rail-contact capacity and the roller arrangement separately from the catalogue bearing-load entries.
The table also contains a visibly ambiguous dimension string for MG90A1-5M1 (“90*225**59/43”). Do not repair it into an assumed purchase specification. Obtain the corrected controlled drawing for any candidate with uncertain website data. Actual dimensional ambiguity [6]
Make sample approval cover the mast or handling assembly.
- Freeze the candidate and interface. Agree full designation, drawing revision, supplied shaft/stud or housing, rail/chain interface and adjustment mechanism. Define radial/side loads, lift or travel cycles, shock and contamination.
- Agree part-level acceptance. Request material/heat-treatment traceability, specified dimensional and rotational checks, grease/seal and clearance records, and any required corrosion or life-test evidence linked to the candidate and lot.
- Inspect after installation. Check retention, alignment, adjustment/clearance and free movement over the intended travel. Follow the machine maker’s installation and acceptance requirements; a roller certificate cannot release the whole mast.
- Trial representative duty and control changes. Agree buyer-defined noise, wear, temperature, movement and durability criteria. Record sample results and establish lot traceability, approved material/site/process changes and repeat-order inspection.
The manufacturer’s historical public-transfer application, dated December 2022, describes customized requirements including dimensional/rotational accuracy, lubrication, sealing, static-pressure strength, fatigue life and corrosion (page 180). It also discloses outsourced operations and contract-based inspection/acceptance (page 60). These are useful evidence for asking about the quoted part’s production route and release owner; they do not establish today’s subcontractors or current process capacity. Original disclosure, actual dated text and pages [7]
The official equipment page captions inspection and production equipment and an automatic assembly line. It is a manufacturer presentation, not a site audit or proof of calibration, measurement uncertainty or available capacity. Request the actual inspection plan and results for the order. Actual equipment page [8]
A slewing-ring enquiry starts with loads, mounting and drive geometry.
The actual slewing category lists internal-geared, external-geared and ungeared four-point-contact families, including WD-010, WD-011, WD-013 and WDB, plus an L-type WDDL configuration. These names identify advertised constructions; a dimensional table or weight is not a load/moment or positioning-accuracy approval. Actual slewing category [9]
Send radial/axial loads and overturning moment with operating combinations, speed/duty and precision needs. Add supporting-structure and bolt drawings, mounting-face requirements, clearance/preload, sealing and lubrication. For a geared ring, specify the mating drive, gear geometry, backlash and relevant load case. Request candidate-specific calculations, mounting limits and test/maintenance documents.
The company introduction also names precision and lightweight-alloy slewing products. Do not infer that every listed WD/WDB part is lightweight, robot-qualified or suitable for ports/ships. Identify the exact proposed construction, material and application approval separately. Scope of company introduction [1]
Use the official route and read qualification scope before relying on it.
The homepage explicitly warns that similar websites may misuse its images and information, and identifies this domain as its official site. Use wandabearing.com and confirm the contract entity 江苏万达特种轴承股份有限公司. The dedicated contact page gives 333 Fushou East Road, Rucheng Subdistrict, Rugao, +86 513 80311111 and [email protected]. Ask for the engineering/quality owner for the actual part and confirm sample receiving details. No enquiry was sent. Official-domain warning [10] Actual dedicated contact [11]
The national standards platform has an actual record for JB/T 7360-2019, the technical conditions for forklift mast rollers and chain-pulley bearings, implemented on 1 April 2020 and replacing the 2007 edition. Wanda’s introduction and historical disclosure describe participation in this standard work. Drafting participation and metadata do not establish that every supplied model/lot conforms. Agree the applicable edition, clauses and test records in the purchase specification. The standard’s full text was not reviewed here. Actual official standard metadata [12] Historical company disclosure [7]
The actual honours page includes a KION China supplier-laboratory recognition certificate title. Its linked original image returned 403 in the browser, so its test scope, issue/expiry conditions and current status were not established. Request the original and recognition scope; a laboratory recognition title is not universal vehicle, customer or bearing-model approval. Obtain current original system certificates and issuer status as required. Homepage customer logos and stated honours are not a substitute for candidate-specific qualification. Actual honours index and original-image evidence boundary [13]
Prepare a Wanda mast-roller or slewing-ring engineering brief
Tick what you have ready. Copy the full checklist with its current status for your procurement notes.
Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.
Documented models.
82 model recordsEvidence, with boundaries.
Our review approach →Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.
- Actual official publicationWanda · company introduction ↗
1969 predecessor, August 2001 company and advertised range; claims not universal order approval.
- Actual official categoryWanda · mast-roller category ↗
Reviewed first page of MG branches; no claim of complete inventory/current stock.
- Actual official categoryWanda · side-roller category ↗
Different SR constructions, not an interchangeable geometry list.
- Actual official categoryWanda · chain-pulley category ↗
CG construction branches; actual chain/interface approval required.
- Actual official categoryWanda · combined-roller category ↗
Nylon slider, radial and different adjustment configurations.
- Actual table and browser-read original section drawing, 9 June 2023Wanda · MGxxA1-x single-row ball detail ↗
C/B width distinction, two reference entries, unspecified suffixes and ambiguous dimension string; no machine approval.
- Original 243-page PDF downloaded and actually readCNINFO-hosted · Wanda public-transfer application ↗
Document itself dated December 2022; pages 60/180 for historical outsourcing/customization, not current route/stock.
- Actual official captionsWanda · equipment presentation ↗
Inspection/production/assembly captions, not a live audit or calibration/capacity verification.
- Actual official categoryWanda · slewing-bearing category ↗
Geared/ungeared and L-type routes; no inferred load, material or robot/ship qualification.
- Actual homepage and browser noticeWanda · official-domain warning ↗
Manufacturer warns of similar sites/misused information; independent seller verification still required.
- Actual official publicationWanda · dedicated contact ↗
Fushou East Road, phone and domain email; no contact or response test performed.
- Actual official metadata readNational standards platform · JB/T 7360-2019 ↗
Title, implementation and replaced edition; full text and lot conformity not established.
- Actual official index; linked KION image browser 403Wanda · honours index ↗
Laboratory-recognition title only; scope, dates and status not inferred from unreadable original.
Report a source correction → · Return to inquiry checklist ↑
Wanda published product scope reviewed
The manufacturer website describes forklift bearings and slewing supports.
Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.
Company-level record; not a model test report · 2026-09-24 04:20:33
Source documentation retained for editorial review.