BearingIndex
THE BEARINGINDEX DIRECTORY

Wantong

Zhejiang Wantong in Sanmen publishes several bearing families and one-to-one selection/custom-solution support. Its actual product details are mainly family/photo references rather than controlled model specifications. Confirm the actual manufacturing route, complete design and current qualification evidence before approving a replacement, tensioner component or custom bearing.

WANTONG · CATALOGUE FAMILIES, CUSTOM REVIEW AND SUPPLY SCOPE

Turn a Wantong product-family enquiry into a controlled supply proposal.

Zhejiang Wantong Bearing Co., Ltd. (浙江万通轴承股份有限公司) publishes bearing families and a selection/custom-solution service from Sanmen, Zhejiang. Its company introduction emphasises low-noise deep-groove production alongside a broader catalogue. Establish the actual product, manufacturing route and engineering responsibility for your order before relying on the family name or advertised service promise. Actual company description [1] Actual selection and support publication [2]

Prepare a sourcing inquiry
01

Specify what Wantong would actually supply.

The actual product details publish tapered roller, tensioner, double-row angular-contact and deep-groove bearing entries. The pages are primarily dated family/photo references, without a complete model specification in the reviewed text. A family label does not establish that the displayed part fits your machine or that a complete pulley/tensioning mechanism is included. Actual tapered-family detail [3] Actual tensioner-family detail [4] Actual double-row detail [5] Actual deep-groove detail [6]

EnquiryInformation to supplyClarify in the proposal
Standard replacementFull marking, shaft/housing and shoulder geometry, existing seals/grease/clearance and duty.Exact model and construction, current drawing, manufacturing route and complete comparison to the incumbent.
Tapered or double-row arrangementSupport arrangement, complete dimensions, radial/axial loads and mounting/setting requirements.Supplied rings/sets, orientation, applicable internal setting, mounting instructions and acceptance.
Tensioner positionComponent/assembly drawing, belt duty, temperatures, load/speed spectrum and required mounting interfaces.Bearing alone versus pulley/other assembled parts, materials, seals/grease, supplied interfaces and validation responsibility.
Custom geometry or performanceDesign constraints, envelope, materials, operating targets, quantities and project milestones.Engineering review, tooling, sample iterations, drawing ownership, qualification and serial-release gates.

Ask whether the quoted family is manufactured at Wantong’s stated site or supplied through another approved route, and who controls each material/process and inspection step. The published broad application list is not evidence of an aircraft, railway or vehicle programme approval.

02

Translate “quiet” and “long life” into measured conditions.

The company introduction specifically describes environmentally positioned quiet deep-groove bearings and machining/grinding/assembly equipment. It does not give a noise grade, acoustic limit, grease environmental declaration or quantified service life for a specific part. Agree those requirements for the candidate rather than repeating the broad positioning as a performance guarantee. Actual quiet-bearing and production description [1]

Provide radial/axial loads, speed/start-stop cycle, shaft/housing fits, allowed axial movement, operating temperature, lubrication and contamination exposure. Freeze accuracy, clearance, cage, seal/shield and lubricant on the controlled drawing. For a pump, fan, motor or compressor, identify the actual bearing position and validate the assembled equipment result.

Component acceptance

Specify geometry/runout, clearance and seal/grease checks, plus vibration quantity, units, bands, fixture, speed/load and pass limits. Request traceable candidate/lot records.

Equipment acceptance

Agree starting/running torque, temperature rise, installed acoustics/vibration and relevant endurance or sealing trials under the actual duty. Define failure criteria and record the tested configuration.

If procurement requires substance restrictions or other environmental documentation, identify the exact requirement and obtain a current declaration/report for the ordered materials. “Environmentally friendly” in a company description does not identify a tested compliance scope.

03

Give the advertised service a concrete deliverable and owner.

The service page describes one-to-one engineering guidance, selection/custom solutions and a 7×24 service system. Ask who will review the drawing and what the proposal includes. The promise does not settle tooling charges, sample cost, qualification responsibility, response time or a successful solution for every duty. Actual service and custom-solution wording [2]

  1. Review feasibility. Agree the actual product construction, manufacturing site/route and unresolved technical inputs.
  2. Freeze the sample proposal. Identify drawing revision, materials, tooling, quantity, price and the tests included.
  3. Approve the sample evidence. Record component and equipment test results, remaining development work and required revisions.
  4. Agree serial delivery and remedies. Define traceability, inspection reports, change notification, warranty and handling of a nonconforming lot.

Put the engineering and service owners, contact channel, coverage, response/escalation process and any site-support cost into the agreement. Separate sample development lead time from repeat-production delivery.

04

Refresh the historical documents before supplier approval.

The actual honour image displays ISO 9001:2008 / GB/T 19001-2008 documents with validity ending in 2015, alongside BOQIU trademark images. This historical display does not establish a current management certificate or current trademark status. Obtain present originals and verify the legal entity, site, scope and issuing-body status. Confirm the brand and markings that will appear on the ordered parts. Actual honour image, enlarged and viewed in browser [7]

The strength page refers to the BOQIU brand and gives broad quality-management language. Ask for the model-specific process/control plan, actual inspection capability, calibration and material/heat-treatment, geometry and functional reports. The quality narrative is not an accredited laboratory scope or a buyer-lot test record. Actual strength and brand publication [8]

The company introduction advertises annual deep-groove output above 6 million sets, followed by a conditional 10 million scale after a second-phase factory is built and commissioned. These figures do not establish the present expansion status or capacity available for your model. Ask for the current production route, validation stage and allocated written schedule. Actual current/planned wording [1]

A Sanmen government notice dated 30 November 2023, covering 2022 industrial-enterprise evaluation, lists Zhejiang Wantong under Jiantiao in the below-designated-size enterprise annex, entry 109. This is dated administrative company evidence; its evaluation grade is not a bearing quality grade, certificate or order-capacity commitment. Actual government PDF, page 11 [9]

05

Keep the Sanmen factory enquiry separate from the regional office entity.

The dedicated contact gives Datang Industrial Zone, Jiantiao Town, Sanmen County, Taizhou, Zhejiang, telephone +86-576-86445568 / 83526966 and mobile 18668628080. Confirm the exact factory, inspection and sample-receiving address and the legal company name on the contract. Actual factory contact publication [10]

The same page separately names Jiangxi Jiangbang Electromechanical Co., Ltd. as its Jiangxi office, and Hangzhou Kuike Bearing Co., Ltd. as its Hangzhou office. A regional office address or separate company name does not automatically identify the manufacturing or contracting party. Agree who issues the quote, supplies the technical approval, handles payment/delivery and provides the warranty. Actual named regional office companies [10]

Send the enquiry with the full drawing and acceptance targets, then request an identified engineering owner and written configuration/quantity/schedule proposal. Product-page tags mentioning price or wholesale are not an actual commercial quote.

YOUR NEXT STEP

Prepare a Wantong supply or custom-design enquiry

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

0 model records

No documented models yet.

Try broader requirements, or explore the manufacturer’s published product scope.

Explore manufacturers →

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Official actual content read in browserWantong · company introduction ↗

    Product families, quiet deep-groove emphasis, equipment and conditional expansion figures; not current allocation.

  2. Official actual content via browser requestWantong · service support ↗

    Selection/custom guidance and7×24 claims; project deliverables/terms require agreement.

  3. Official actual detail via browser requestWantong · tapered-family detail ↗

    Datedfamily/photo publication, not complete model/dimensional approval.

  4. Official actual detail via browser requestWantong · tensioner-family detail ↗

    Family reference; bearing/pulley/assembly supply scope not defined.

  5. Official actual detail via browser requestWantong · double-row angular-contact detail ↗

    Family reference; arrangement/model/setting require controlled sheet.

  6. Official actual detail via browser requestWantong · deep-groove detail ↗

    Family reference without quoted model noise/temperature/life approval.

  7. Official actual image enlarged and viewed in browserWantong · honour and certificate image ↗

    HistoricalISO9001:2008 documents ending2015 and BOQIU trademark images; not current verified status.

  8. Official actual content via browser requestWantong · comprehensive strength ↗

    BOQIU brand and quality narrative; not test scope or lot evidence.

  9. Primary46-pagePDF actually readSanmen government · 2022 industrial evaluation results ↗

    30 November2023 notice, page11 entry109 Wantong/Jiantiao; administrative scope only.

  10. Official actual contact via browser requestWantong · dedicated factory and office contacts ↗

    Sanmen address/phones and named Jiangxi/Hangzhou office entities; confirm order/receiving responsibilities.

Report a source correction → · Return to inquiry checklist ↑

Wantong published product scope reviewed

The manufacturer website describes motor and pump bearing applications.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:33

Source documentation retained for editorial review.