BearingIndex
THE BEARINGINDEX DIRECTORY

XLB

XLB is the brand identified by Xinchang Xinglun’s own site. Its catalogue spans track/guide rollers, forklift mast-chain bearings, automotive hub bearings and SL/ZSL cylindrical-roller designs. Choose by contact profile and support function, resolve repeated hub designations against a current drawing, and keep supplier cross-reference columns separate from approved interchange.

XINCHANG XLB · CONTACT PROFILE AND SUPPORT FUNCTION

A matching bore does not establish a matching working surface.

The official site of Xinchang Xinglun Bearing Co., Ltd. (新昌兴轮轴承有限公司) identifies XLB as its brand and describes standard and non-standard bearing manufacture. Its detailed catalogue supports separate enquiries for track rollers, forklift mast-chain bearings, automotive hub bearings and cylindrical-roller support arrangements. Start with the actual mating track, hub or shaft function; then identify the exact drawing and variant. Actual manufacturer and product-scope statement [1]

Prepare a sourcing inquiry
01

The LFR table distinguishes variants with the same basic envelope.

The actual LFR page groups KDD and NPP variants and includes d, Dmax, B, C, AT and ds fields. Its drawing links those fields to the bearing/track arrangement. A useful comparison is LFR5201KDD versus LFR5201-12KDD: both print d12, Dmax35, B15.9 and C15.9, but AT and ds differ. The readable table does not print a dimensional unit or tolerances; these are source entries for clarification, not an approved fit. Actual LFR drawing and table [2]

Official XLB designationPrinted common fieldsPrinted differing fieldsBuyer implication
LFR5201KDDd12; Dmax35; B15.9; C15.9AT20.65; ds10Obtain the current drawing and identify the matching track/contact arrangement.
LFR5201-12KDDd12; Dmax35; B15.9; C15.9AT21.75; ds12Do not substitute solely because the bore, outside envelope and widths match.

Send the actual track section, contact geometry, mounting stud/shaft and allowable adjustment arrangement, together with working load, travel speed, lubrication and contamination conditions. Ask the supplier to confirm the proposed suffix, seal/shield construction and installation instructions rather than decoding KDD/NPP into an unverified order specification.

The same manufacturer table has INKO and INA reference columns. Those are manufacturer-published comparisons; no independent interchange authorization or endorsement was obtained. Use them to identify a candidate for drawing comparison and testing.

02

“Type” and contact shape matter in the guide and forklift catalogues.

Guide-bearing enquiry

The guide page contains lettered Type variants alongside d/D/C/B dimensions and reference-number columns. Its MG206FFU, MG206FFUA and MG206FFUB rows share d30, C29 and B16.59, while D is printed as 81.00, 81.50 and 82.00. The table does not provide a readable unit/tolerance qualification; the small differences should be resolved in a controlled drawing, not rounded away. Actual guide-bearing table [3]

Explain the track shape, allowable lateral movement, opposing roller arrangement and working contact. Ask which Type contour fits the rail and how clearance is adjusted and measured in the assembly.

Forklift mast-chain enquiry

The mast-chain page separately lists Type, d/D/C/B, R1/R2, offset e, radius R and angle α. Some rows have empty fields and others give alternatives such as “3 or 8”; do not interpret blanks as zero or select an alternative without the part drawing. Actual forklift mast-chain table [4]

Identify whether the requested part supports the chain path or another mast interface. Provide the actual chain/track geometry, bracket and shaft dimensions, retaining arrangement and full duty cycle. Agree the contact contour and alignment before a sample trial.

For these two families: inspect the full working profile and assembled clearances, rather than checking only a loose bearing’s bore and outside diameter. Manufacturer “Other No.” columns are comparison leads, not proof that your mast or guide assembly accepts that part.

03

DAC306037 appears twice with different outer dimensions and weights.

The actual first-generation hub-bearing table explicitly uses mm for basic dimensions and kg for weight. It contains two DAC306037 rows: one prints d30/D60/B37/C37 and 0.72kg; another prints d30/D60.03/B37/C37 and 0.42kg, alongside SKF633313C and FAG529891AB references. Both rows were checked in the live browser. Their shared XLB designation does not resolve which construction applies to your order. Actual hub table and row conflict [5]

Ask for the current complete designation, drawing revision, fitted interfaces and explanation of the two rows. Supply the vehicle/OE reference, axle position, model/year/variant and actual mating dimensions. Confirm the supplied bearing versus complete hub scope, retention, sealing, installed clearance and any sensor interface required by the application.

What do the material and installation paragraphs establish?

The manufacturer describes vacuum-degassed steel, 100Cr6/SUJ2 material comparisons, a nylon cage and prefilled grease described as tolerating 150°C. Those are broad hub-family claims, not a certificate or operating limit for every DAC row. Request the candidate’s material, grease and seal specification, applicable temperature conditions and installation instructions. Do not apply the general “no clearance adjustment” paragraph to an unidentified bearing arrangement; the page separately discusses single-row angular-contact installation.

Reference numbers in SKF/FAG columns do not prove original-brand supply, vehicle approval or identical performance. Approval needs the candidate drawing and actual assembly validation; unresolved duplicate data should remain outside the purchase specification.

04

Choose the axial support function before selecting an SL or ZSL row.

The SL/ZSL publication distinguishes non-locating, semi-locating and locating arrangements: respectively allowing axial movement both ways, locating in one direction, or supporting limited axial load in both directions. It describes ZSL1923 with rolling-element separators, while several SL families are described as full-complement designs. These are different published constructions/functions; a similar dimensional envelope is not enough for substitution. Actual SL/ZSL structure and function description [6]

  1. Map the shaft support. Identify which bearing locates the shaft and where thermal axial movement is allowed. State the radial/axial load direction, speed and mounting space.
  2. Choose the exact construction. Confirm the candidate family, separator/full-complement design, permitted axial movement, retaining features and lubrication path in its drawing.
  3. Validate the actual duty. Obtain order-specific clearance, material and lubrication requirements, load/speed calculation conditions and the agreed assembly test. Published limiting-speed or load columns do not establish your machine’s operating rating.

The page also contains table transcription issues, including an SL18 3010 d1 entry printed as “5900”. BearingIndex does not repair that field or infer a missing decimal. Obtain a corrected current drawing for any affected row, and do not treat “--” fields as zero.

05

Keep Xinchang identity and current product qualification separate.

The official dedicated contact page gives Qingshan Industrial Zone, Xinchang, [email protected] and +86 575 86177228. Confirm the current legal seller and exact sample/production address because the public location is an industrial-zone description. No enquiry was submitted. Actual manufacturer contact [7]

A Shaoxing Emergency Management Bureau PDF dated 14 June 2023 is a public notice of proposed level-three safety-production standardization enterprises, with a 14–22 June consultation period. PDF page4, row90 names 新昌县兴轮轴承有限公司, mechanical industry, reassessment. The official factory website writes 新昌兴轮轴承有限公司. Confirm the exact licence name and linkage before relying on the record; do not merge similarly named Dalian companies. The notice is historical and proposed, not proof of current certification or bearing-product acceptance. Actual government notice and name wording [8]

The manufacturer’s ISO9001 claim, scale and non-standard product-count claims are not a current order qualification audit. Ask for the relevant certificate original, issuer/current status and covered site, plus drawing-linked material/lot and dimensional records for your candidate. Agree prototype costs, MOQ, tooling responsibility, production milestones and change approval directly; no current inventory or commercial commitment was verified.

YOUR NEXT STEP

Prepare an XLB working-profile and variant brief

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

0 model records

No documented models yet.

Try broader requirements, or explore the manufacturer’s published product scope.

Explore manufacturers →

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Actual official manufacturer textXLB · official company scope ↗

    Brand identity and scope; scale and ISO9001 statements remain self-claims without present order audit.

  2. Actual official table and browser-viewed drawingXLB · LFR drawing and grouped variant table ↗

    Shared envelope versus AT/ds difference; readable table has no explicit units/tolerances, comparison columns not independent interchange.

  3. Actual official catalogueXLB · guide-bearing Type/dimensional table ↗

    MG206 variant entries and Type distinction; no unit/tolerance inference or automatic fit approval.

  4. Actual official contour/variant tableXLB · forklift mast-chain catalogue ↗

    Type, radii, offsets, alternatives and blanks; actual machine suitability must be confirmed.

  5. Actual official table, browser row verificationXLB · first-generation hub-bearing table ↗

    mm/kg headings and duplicated DAC306037 rows; broad material/grease claims not vehicle authorization.

  6. Actual official technical publicationXLB · SL/ZSL construction, functions and tables ↗

    Locating distinctions and separator/full-complement routes; suspect transcription not corrected into specifications.

  7. Actual official contactXLB · dedicated contact ↗

    Qingshan Industrial Zone, email and telephone; exact site/legal seller need direct confirmation.

  8. Original government PDF, actual text readShaoxing Emergency Management Bureau · 2023 proposed safety-standardization list ↗

    14 June2023 proposed notice, PDF page4 row90, name contains 县 unlike website wording; historical record, linkage/current status not independently established.

Report a source correction → · Return to inquiry checklist ↑

No reviewed model or batch reports are available. Independent verification is not implied.