BearingIndex
THE BEARINGINDEX DIRECTORY

Yongan Bearing

Fujian Yongan Bearing develops tapered roller bearings and wheel-hub units for vehicle driveline and chassis applications. Separate single-row bearing setting, double-row clearance and hub-unit validation in the enquiry. Its published test-machine ranges help plan testing but do not replace a report for the selected design.

YONGAN · VEHICLE TAPERED BEARINGS AND HUB UNITS

Specify the driveline position before choosing the bearing and validation plan.

Fujian Yongan Bearing Co., Ltd. (福建省永安轴承有限责任公司) describes its principal work around gearbox, final-drive, differential and wheel-hub bearings. Its official product range includes metric, inch and non-standard single-row tapered bearings, double-row tapered bearings, and second/third-generation hub units. These are different engineering enquiries, even when they serve the same vehicle. Official company [1] Actual product families [2]

Prepare a sourcing inquiry
01

A differential bearing and a complete hub unit need different release documents.

Official product routeBuyer should provideApproval to obtain
Single-row tapered: metric, inch or non-standardComplete cone/cup designation or drawing, mating arrangement, shaft/housing fits, loads, speed and lubrication.Matched components, boundary dimensions, mounting/setting method and agreed clearance or preload in the actual assembly.
Double-row tapered bearingArrangement, load direction, spacer/assembly drawing and temperature conditions.Delivered and installed axial-clearance specification, measurement method and responsibility for adjustment.
Second/third-generation wheel-hub unitVehicle position, wheel/knuckle interfaces, packaging envelope, seal environment and any sensor/encoder requirement.Complete unit drawing, supplied interface and component scope, mounting procedure and programme-specific validation.

The official product pages identify these families and offer attachments; this review does not establish a selected-model drawing or interchangeable vehicle fitment from their family titles. Request the actual model document, revision and application approval before releasing a purchase. Product structure [2]

For a replacement, send original markings, both mating-part dimensions and the failure evidence. For a new programme, define radial/axial loads, speed spectrum, temperature, lubricant, contamination and required service life with the engineering team. A bearing catalogue code alone does not define the installed setting or a complete hub interface.

02

Ask how axial clearance is measured, not only what number is quoted.

Yongan is the named original applicant in published utility-model patent CN209764054U, “bearing axial-clearance measurement equipment”, published 10 December 2019. Its description discusses double-row tapered bearings and measurement using outer-ring restraint, opposing inner-ring motion and displacement sensing. This is a specific technical record; it does not establish current calibration, numerical accuracy or use on every production line. Actual patent description [3]

Freeze the measurement conditions

Ask for the selected-bearing work instruction: component restraint, measuring force and motion, rotation/settling procedure, temperature, reference surfaces, instrument resolution and calibration traceability.

Connect delivery to installation

Agree the delivered clearance limit, sampling or inspection frequency, lot report and any change caused by fitting or operating temperature. Record who sets the final installed clearance or preload and how it is accepted.

If a supplier proposes an alternative clearance method, have both parties compare it on traceable samples before setting the acceptance limit. Do not convert a patent into a blanket accuracy guarantee or assume the shipping measurement equals the clearance in the vehicle.

03

Use the published machine ranges to build a selected-design test plan.

The official trial-equipment page describes ABLT-1 fatigue equipment for bore ≥20 mm and outside diameter ≤130 mm; ABLT-2 for bore ≥60 mm and outside diameter ≤260 mm; and ABLT-6 for bore 25–60 mm. These are equipment descriptions, not proof that every bearing within those limits has completed a test. Confirm fixture, load, speed, lubrication, temperature, duration and available machine time for your exact part. Official machine descriptions [4]

The same page names BGT-1A for grease leakage, temperature rise and dust-related sealing tests, and ABFT-3 for hub-bearing starting/maximum/average friction torque and temperature behaviour. For a sealed hub programme, separate these tests from fatigue testing and agree the acceptance criteria, sample quantity, failures, reporting and programme duty cycle. Seal and torque equipment [4]

  1. Engineering release: approve drawing, setting, seal/lubricant and application duty.
  2. Traceable samples: link material, heat treatment, geometry and assembly records to sample lots.
  3. Validation: obtain the agreed fatigue, sealing and torque/temperature reports with actual conditions and exceptions.
  4. Serial control: agree lot inspection, process/component changes, delivery schedule and corrective-action evidence.

Yongan describes protected-atmosphere salt-bath heat treatment, roller manufacturing and linked grinding/assembly. Its stated grinding speed above 60 m/s is a manufacturing-process statement, not a permissible operating speed for the bearing. Ask which processes apply to the selected design and which steps are outsourced. General annual-capacity statements do not reserve capacity for an order. Official production process [5]

04

Confirm current certificates and the responsible sales route.

The company and quality pages give a history including IATF 16949 certification in 2018 and other later management-system milestones. Request current certificates with validity, legal entity, manufacturing address and scope, and independently verify them where required. The published customer list is a supplier statement and does not establish current nomination or approval for a particular vehicle programme. Company history and customer claims [1] Quality-system history [6]

The footer gives sales 0598-8060018, office 0598-8060022 and [email protected]. The dedicated contact body instead lists domestic sales 0598-3607100 / [email protected], and international sales 0598-3634197 / [email protected]. Confirm the current contact and responsible engineer through the official company route before exchanging order or payment details. Both sections give 699 Puling Road, Yongan, Fujian. Actual contact page and footer [7]

Request the contracting and invoicing entity, production site, samples/tooling, serial lead time, export scope, packing and delivery terms in the quotation. The company describes a group relationship and a trading subsidiary; agree which entity is manufacturing, selling and handling the claim for your order. Company structure [1]

YOUR NEXT STEP

Prepare a Yongan vehicle-bearing enquiry

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

0 model records

No documented models yet.

Try broader requirements, or explore the manufacturer’s published product scope.

Explore manufacturers →

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Official actual company pageYongan · company profile ↗

    Vehicle-bearing applications, group/operating structure, historical certifications and supplier customer statements.

  2. Official actual product page/navigationYongan · tapered-bearing product structure ↗

    Metric/inch/non-standard, double-row and hub-generation categories; no selected-model fitment inferred.

  3. Actual published patent textCN209764054U · bearing axial-clearance measurement equipment ↗

    2019-12-10 publication, Yongan applicant and double-row tapered measurement mechanism; no current implementation/calibration guarantee.

  4. Official actual equipment descriptionsYongan · trial equipment ↗

    ABLT diameter boundaries, BGT sealing and ABFT hub torque/temperature testing; selected-part reports to obtain.

  5. Official actual process descriptionYongan · production equipment ↗

    Heat treatment, grinding, roller and assembly capability claims; current order capacity not established.

  6. Official actual historical pageYongan · quality history ↗

    Certification milestones, not verified current certificate validity/scope.

  7. Official actual dedicated page/footerYongan · contacts ↗

    Different body/footer telephone routes, emails and 699 Puling Road; current responsible route to confirm.

Report a source correction → · Return to inquiry checklist ↑

Yongan Bearing published product scope reviewed

The manufacturer website describes tapered roller bearings and wheel-hub units.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:33

Source documentation retained for editorial review.