BearingIndex
THE BEARINGINDEX DIRECTORY

YTP

YTP / Ningbo Yutong: linear ball bearings, flanged and housed units, shaft supports and specialised variants, with a published selection workflow and drawing-led catalogue.

YTP · LINEAR MOTION · SYSTEM SELECTION

Select the bearing with its shaft, housing and motion conditions.

Ningbo Yutong identifies YTP as its brand for linear ball bearings, flanged bearings, housed units, shaft supports and KH stamped-outer-ring products. It also publishes nickel-plated and steel-cage routes, a 3D-library link and a selection tool. The useful procurement question is how those parts work together in your axis—not simply which bore size matches the old bearing. Official company scope [1]

Prepare a sourcing inquiry
01

A self-lubricating suffix changes the installed length.

The actual LM and MX tables provide a more useful check than a category name. Compare the complete envelope before approving a replacement. Standard LM table [2] Self-lubricating MX table [3]

Official table referenceBore dr / outside DPublished length fieldsBuyer check
LM20UU20 / 32 mmL = 42 mmSeat, retention and available axial space.
LM20UU-MX20 / 32 mmL = 56 mm; L1 = 42 mmClarify both length fields on the drawing and allow for the complete MX assembly.

Listed does not mean in production.

The MX table explicitly says bore sizes 35, 40 and 50 are not produced and are for reference only, although rows are displayed. Obtain a current manufacturing/availability statement before specifying those sizes. “Self-lubricating” also needs a part-specific maintenance interval, lubricant-reservoir description and operating limits; it is not a maintenance-free lifetime promise. MX note and table [3]

The standard table distinguishes resin-cage LM□UU, steel-cage LM□M and nickel-plated routes, with separate material/seal fields. Ask for the exact quoted BOM rather than treating a steel cage or surface plating as proof that the whole bearing is stainless or that a sealed variant has the same thermal limit. Variant construction table [2]

02

Resolve installation and movement before comparing load ratings.

Replacing an existing unit

Provide complete markings, original drawing and measured envelope, flange position/shape, pilot, hole pattern, housing fit and retention. Include the shaft diameter, material, hardness, surface finish and straightness. YTP’s cross-reference table covers LM, LME, flanged, open/adjustable, housed and other routes; use a suggested counterpart as a drawing-comparison starting point, not independently verified interchangeability. Manufacturer cross-reference table [4]

Designing a new axis

Provide a layout showing supported shaft length, number/spacing of bearings, centre of gravity and load direction, plus stroke, cycles, acceleration, impact and target duty. Identify the support structure and flange/retention constraints. YTP’s catalogue separates closed, adjustable and open structures; request the actual assembly drawing and load orientation instead of selecting only by nominal bore. Catalogue structure [5]

YTP’s installation guidance calls for aligned insertion and controlled support of the bearing during fitting, and warns against direct set-screw clamping of the outer sleeve or excessive clearance adjustment. Its maintenance page distinguishes lubrication supply routes and says the ordinary linear bearing does not carry rotational duty. Request variant-specific assembly/lubrication instructions—especially if shaft rotation, short oscillating strokes or contamination are part of your machine. Clearance and retention guidance [6] Installation and maintenance [7]

03

Use the selection tool as a calculation record, then obtain engineering confirmation.

  1. Define the inputs. The reviewed interface exposes total load, shaft count, bearing count/spacing, impact and offset, stroke/cycles, life target, temperature, shaft hardness, installation structure and clearance.
  2. Record the assumptions. Save the chosen model, load-rating units, life-distance basis, correction factors, static check and actual geometry. Its displayed calculations use a 50 km basis and explicitly flag comparison with 100 km-based data. Do not compare nominal C values from unlike bases without a documented conversion.
  3. Reconcile the offered drawing. Confirm the construction, tolerances and production availability with YTP; use CAD for spatial integration and the controlled drawing for acceptance.
  4. Run the axis trial. Check installed friction, accuracy, temperature and wear under the real load distribution, alignment and lubrication schedule.

Reviewed selector interface [8] 2026-08-26 tool announcement [9] The announcement describes report/CAD functions and says results/prices are references requiring engineering and official quotation confirmation. The interface loaded during this review, but its server status initially showed connecting; a completed calculation, CAD download and current quote were not independently validated here.

Photo identification and authenticity are separate.

The 2026-09-26 announcement presents photo identification as the current core function and explicitly marks one-item/one-code authenticity tracing as reserved and not yet online. Use an image result to narrow candidates, then compare measured interfaces and the supplier’s drawing. Do not accept it as a current anti-counterfeit or batch-traceability check. Identification-tool announcement [10]

04

Standard participation is verifiable; part conformity still needs its own evidence.

The national standards platform lists 宁波宇通轴承有限公司 among the drafting organisations for GB/T 19673.2-2025, covering series-5 sleeve-type linear-ball-bearing accessories and effective 2026-02-01. It also lists the company for GB/T 27557-2026, a designation-method standard published 2026-07-30 and scheduled for implementation 2026-11-01. On this review date, 2026-10-08, the latter is published but not yet effective. Accessories standard record [11] Designation standard record [12]

These records establish drafting participation and specific document scope, not certification of every YTP bearing. The reviewed product tables still cite GB/T 16940-2012. Ask which standard edition, characteristic limits, drawing revision and conformity report apply to the actual delivered part; do not replace the table’s declared basis with a newer number simply because a company news page discusses it. Declared production standard [2] MX declared standard [3]

The main site lists 龙镇大道376号, Longshan, Cixi; the catalogue footer gives 西门外工业区. Both identify the company and [email protected] / 0574-63780228. Confirm the current manufacturing and contracting addresses rather than assuming the two descriptions prove separate factories or a relocation. The company states an ISO9001:2015 quality system; obtain current legal/site/scope/validity evidence for supplier qualification. Main-site identity and contacts [1] Catalogue footer [5]

YOUR NEXT STEP

Send YTP the whole linear-axis definition

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

287 model records
Model / bearing familyManufacturerBore dOutside DWidth B / T / LDetails

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Manufacturer publicationYTP · company introduction ↗

    Exact company/brand, linear product scope, quality-system statement and main-site contacts; current certificate not independently audited.

  2. Manufacturer model tableYTP · LM standard construction and dimension table ↗

    Actual LM20UU envelope, separate BOM/variant and kgf rating fields; final quoted drawing needed.

  3. Manufacturer model tableYTP · LM UU-MX model table ↗

    LM20UU-MX L/L1 and explicit reference-only/not-produced sizes; no maintenance-free life inferred.

  4. Manufacturer comparisonYTP · model cross-reference table ↗

    Supplier-proposed counterpart families; not independently validated interchange or competitor material/performance equivalence.

  5. Manufacturer catalogueYTP · linear-product catalogue ↗

    Actual structural routes and catalogue-footer address; HTTP accessible, HTTPS product subdomain certificate error not bypassed.

  6. Manufacturer guidance, 2023-08-04YTP · clearance and fixing guidance ↗

    Alignment/fitting/retention considerations; offered variant requires controlled instructions.

  7. Manufacturer guidance, 2023-08-04YTP · installation and maintenance ↗

    Lubrication routes and ordinary linear-bearing rotational-duty limitation; no universal instructions applied to all specialised variants.

  8. Manufacturer tool interfaceYTP · selector interface ↗

    Visible inputs and stated calculation basis reviewed; successful result/export/pricing not independently validated.

  9. Manufacturer announcementYTP · selection-tool launch, 2026-08-26 ↗

    Described load/life/report/CAD functions and engineering/quote confirmation requirement; not calculation validation.

  10. Manufacturer announcementYTP · photo-identification announcement, 2026-09-26 ↗

    Photo-identification claim; authenticity tracing explicitly reserved/not online.

  11. National standards recordSAMR · GB/T 19673.2-2025 ↗

    Company drafting participation, series-5 accessories scope and effective date; not individual product certification.

  12. National standards recordSAMR · GB/T 27557-2026 ↗

    Drafting participation and designation-standard dates; published, not yet effective on review date.

Report a source correction → · Return to inquiry checklist ↑

YTP published product scope reviewed

The manufacturer website describes linear ball bearings and support units.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:34

Source documentation retained for editorial review.