BearingIndex
THE BEARINGINDEX DIRECTORY

Yuanhai

Rongcheng Yuanhai makes composite sliding bearings, including YHS-1 dry/low-lubrication, YHS-2 boundary-lubrication and bimetal bushings. Select the material and lubrication regime together. The old catalogue contains copper-lead descriptions, while a separate patent concerns lead-free material; neither establishes the composition of every current product.

YUANHAI · COMPOSITE BUSHINGS AND LUBRICATION REGIMES

Choose the sliding layer and lubrication regime before specifying the bushing.

Rongcheng Yuanhai Sliding Bearing Co., Ltd. (荣成远海滑动轴承有限公司) identifies YHS-1, YHS-2 and bimetal bushings as principal series. Its actual product descriptions distinguish low/no-oil service, boundary lubrication and oil-lubricated bimetal work. Use that distinction to define the shaft, installed bore and operating duty, rather than relying on the general “oilless” site wording. Official company range [1]

Prepare a sourcing inquiry
01

YHS-2 and the oil-lubricated bimetal offer need their own lubrication plan.

Actual official descriptionBuyer selection questionRelease documents
YHS-1: plastic/bronze/steel three-layer composite; no-oil or low-oil service described.Which exact sliding-layer formulation suits the load, movement, temperature and counterface?Material grade, drawing, permitted operating regime and any initial/running lubrication instruction. Actual YHS-1 detail [2]
YHS-2: steel-backed, sintered spherical bronze with modified polyoxymethylene surface and oil-storage pockets.What initial lubricant and replenishment regime is required for this boundary-lubrication material?Selected POM-layer grade, pocket/groove configuration, lubricant and maintenance procedure. Actual YHS-2 detail [3]
Bimetal: low-carbon steel backing with copper-lead or aluminium-tin alloy descriptions, oil pockets/grooves for lubricated work.Which alloy and oil supply apply to the exact shaft/application?Composition, lining/backing thickness, oil-hole/groove geometry and lubrication specification. Actual bimetal detail [4]

These are different material routes. Do not apply the YHS-1 low/no-oil wording to all YHS-2 or bimetal parts. Send actual pressure/load, velocity or oscillation, start-stop duty, temperature, lubricant, contamination and medium to the supplier's engineer; request selected-material limits and the conditions behind them.

02

A lead-free materials patent does not make the whole historical catalogue lead-free.

Published application CN106756214A, 31 May 2017, names Yuanhai and describes a steel-backed copper-alloy antifriction layer using graphite, molybdenum disulphide and bismuth, with a lead-free formulation. This is a specific published materials proposal. It does not establish that every current YHS or bimetal product uses that formulation, nor does it replace a material declaration for the ordered part. Actual patent abstract/description [5]

The actual catalogue's bimetal page separately describes copper-lead and aluminium-tin layers. If the buyer requires lead-free or restricted-substance evidence, put that requirement in the material/drawing release and obtain the selected grade's composition, declaration and test basis. Do not assign an unspecified patent formulation to an old product-family entry. Actual catalogue alloy descriptions [4]

Approve the material stack

Identify backing, sintered/intermediate and sliding layers, plating/coating, thickness and process responsibility. Confirm any supplier substitute in writing before manufacture.

Approve the actual environment

Define oil/grease, cleaning chemicals, moisture/corrosion and temperature duty. A plated backing or published material concept is not universal corrosion resistance or a guarantee of friction under every condition.

03

Inspect the bushing in its housing and against the selected shaft.

The bimetal page describes a rolled thin-wall form. Request the housing fit, shaft tolerance and finish, bushing seam orientation, chamfer and installation method for the selected material. Agree installed-bore measurement after fitting and operating clearance; a loose-part dimension does not by itself release the installed sliding interface. Actual thin-wall description [4]

  1. Drawing release: bore/OD/length, layer thickness, flange or thrust face where relevant, seam and oil-hole/groove positions.
  2. Sample inspection: material-stack evidence, thickness/dimensions, installed bore, shaft/counterface and lubricant.
  3. Representative-duty test: agree motion/load/speed/temperature, wear/friction and failure acceptance under the buyer's actual assembly.
  4. Repeat-lot control: retain material/inspection traceability and change approval for layers, coatings, geometry and manufacturing route.

The dated YHS-1 page gives broad temperature and maintenance statements. Obtain selected-grade, load/velocity and lubrication conditions before using those as design limits; do not convert a broad family range into a guaranteed machine operating temperature or service life. Supplier family claims [2]

For a replacement, provide old markings, drawings and wear evidence together with measured shaft/housing condition. A bushing may fit the same envelope while using a different sliding layer, oil supply or acceptable counterface.

04

The English contact supplies the phone numbers missing from the Chinese footer.

The reviewed Chinese footer leaves phone/fax values blank, while the actual English contact gives 0631-7502342, fax 0631-7518762 and [email protected]. It lists 108 South Liming Road, Rongcheng, Shandong, postcode 264300. Confirm the current responsible engineer, manufacturing/audit site and receiving route through that official contact. Actual English contact [6] Chinese company/footer [1]

The company describes own design and inspection capability and broad customer industries. Request the current process route, material production versus purchased stock, forming/finishing responsibility and selected-part inspection evidence. General customer-sector descriptions do not establish a current vehicle or marine programme approval. Obtain current entity/site/scope qualifications where required. Supplier capability description [1]

Send sample and serial quantities separately. Request current exact-grade availability, design/tooling scope for custom work, lead time, packing/storage protection and delivery terms. Agree the material and lubrication configuration, lot records and claim evidence in the order before approving any alternative.

YOUR NEXT STEP

Prepare a Yuanhai composite-bushing enquiry

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

0 model records

No documented models yet.

Try broader requirements, or explore the manufacturer’s published product scope.

Explore manufacturers →

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Official actual company pageYuanhai · company ↗

    Main material series and supplier design/inspection descriptions; Chinese footer lacks phone/fax values.

  2. Official actual dated product descriptionYuanhai ·YHS-1 ↗

    Three-layer plastic/bronze/steel and low/no-oil family claims; selected-grade conditions to confirm.

  3. Official actual product descriptionYuanhai ·YHS-2 ↗

    Steel/sintered-bronze/modifiedPOM, boundary lubrication and storage pockets.

  4. Official actual product descriptionYuanhai ·bimetal bushing ↗

    Copper-lead/aluminium-tin layers, oil lubrication and rolled thin-wall form; selected grade required.

  5. Actual published patent abstract/descriptionCN106756214A ·antifriction copper-based bimetal material ↗

    2017-05-31, steel/copper-alloy lead-free formulation proposal; not blanket catalogue composition or current patent-right guarantee.

  6. Official actual dedicated contactYuanhai ·English contact ↗

    Phone/fax/email and108SouthLimingRoad receiving location to confirm.

Report a source correction → · Return to inquiry checklist ↑

Yuanhai published product scope reviewed

The manufacturer website describes self-lubricating plain bearings and bimetal bushings.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:33

Source documentation retained for editorial review.