BearingIndex
THE BEARINGINDEX DIRECTORY

Yuyang

Jiangsu Yuyang describes a Xuyi operation established in 2014, focused in its introduction on motor-bearing applications in appliances, pumps, fans and power tools. Its broader product/application navigation does not establish order-specific capability or approval. The actual deep-groove detail pages lack usable model parameters, and its railway article discusses FAG/Schaeffler rather than documenting Yuyang supply. Request candidate drawings and validate the intended motor assembly.

MOTOR-BEARING PROCUREMENT · QUALIFY THE ACTUAL CANDIDATE

Turn a broad motor-bearing offer into a drawing and an assembly trial.

Jiangsu Yuyang Bearing Co., Ltd. (江苏虞洋轴承有限公司) states that it was established in 2014 in Xuyi and combines research, production and sales. Its actual introduction identifies household appliances, water pumps, fans and power tools as motor-bearing applications. These are useful enquiry contexts, but no complete model-level specification or independent application approval was established from the viewed product pages. Actual company introduction and motor focus [1]

Prepare a sourcing inquiry
01

Ask for a candidate drawing before treating the catalogue as a model list.

The actual deep-groove category contains two items titled “deep-groove ball bearing” and an item labelled “needle bearing”. Both viewed deep-groove detail pages show a family name, blank identifier field and product imagery without a readable dimensional, load, speed or suffix specification. The original image on the first detail was loaded and visually checked in the browser; it is an illustration, not a dimensional drawing. Actual deep-groove category [2] Actual first product detail and viewed illustration [3] Actual second product detail [4]

For a replacement

Send the existing manufacturer/designation with all suffixes and its approved drawing. Include shaft/housing fits, locating arrangement, clearance requirement, seals/shields, lubricant and actual duty. Ask Yuyang to identify the exact proposed replacement and document every difference.

For a new design

Give the installation envelope, radial/axial loads, speed and start/stop duty, temperatures and contamination. Request a controlled candidate drawing with supplied construction, ratings and the assumptions supporting its selection. Do not approve from a product photo or category name.

Confirm which parts are manufactured at the quoted site and which are sourced, and who owns material, heat-treatment, grinding and final inspection release. The presence of many family headings does not prove every family is currently manufactured or stocked by this company.

02

Appliances, pumps, fans and tools need different enquiry inputs.

Use the company’s stated motor-bearing contexts to define a real operating brief. The questions below are buyer-defined inputs, not verified special designs or guaranteed services offered by Yuyang. Actual advertised motor applications [1]

Equipment contextImportant input to supplyCandidate response to request
Appliance motorStarts/stops, actual noise and temperature conditions, shaft/housing interfaces and contamination.Construction/grease, agreed bearing-noise or vibration tests and separate installed-motor validation.
Pump motorMechanical load path, radial/axial forces, fluid/moisture exposure and sealing arrangement outside the bearing.Load/clearance assessment and the bearing’s own seal/lubrication scope; do not assume a bearing seal replaces the pump’s fluid seal.
Fan motorSpeed range, rotor/support layout, load, alignment, dust/moisture and maintenance access.Fits, locating arrangement, lubrication and acceptance conditions under the specified duty.
Power-tool motorIntermittent speed/load cycles, shocks, tool-generated contamination and available envelope.Candidate-specific seal/grease and material/geometry documents plus a representative duty trial.

If electrical insulation, unusual corrosion resistance or another special property is required, state the requirement and request the proposed construction and test document. None of those properties is established simply by the motor-bearing label.

03

Keep bearing release tests and motor assembly tests in the same approval file.

  1. Agree the controlled specification. Confirm dimensions/tolerances, fits and clearance, seal/shield/cage and grease, material and required ratings. Link the supplier response to the full designation and drawing revision.
  2. Inspect representative bearings. Define the dimensional, clearance, material/heat-treatment and any required noise/vibration checks and measurement conditions. Obtain results associated with the sample lot rather than relying on a general quality claim.
  3. Validate in the intended motor. Record actual installation and operating conditions; evaluate the buyer’s agreed temperature, rotation, vibration/noise and durability criteria. Bearing-only tests cannot isolate every assembled-motor fault.
  4. Release repeat supply with changes controlled. Agree lot traceability, inspection records, lubricant/material/site-change approval and complaint handling. Establish sample costs, MOQ and delivery milestones for the actual part.

The official service/support page contains a heading but no usable published response-time, repair or warranty procedure in the reviewed body. Request the responsible engineering/quality contact, required complaint measurements and commercial terms directly; no support response or field-service capability was tested. Actual service page and its evidence gap [5]

04

The actual railway article and certificate wording need careful reading.

The railway detail is dated 11 June2020 and discusses FAG/Schaeffler bearings in AGC/Bombardier/SNCF examples. It does not document Yuyang’s supply, a Yuyang bearing designation or its qualification for those vehicles. Do not turn the article or broad railway/aerospace/wind navigation into an approved customer or sector-supply claim. Actual railway detail, full browser text read [6]

The introduction says product control follows historical IS9001:2008 and TS16949:2009 modes; that wording is not a readable current certification. The actual honours page explicitly displays “没有资料” (no material). Obtain current certificate originals and issuer-status evidence covering the legal entity, production site and applicable scope. This public evidence gap is not a finding that no certificate exists. Actual quality-control wording [1] Actual honours-page state [7]

A government-hosted original 2025 provincial specialized-SME second-batch public-notice list names 江苏虞洋轴承有限公司 at row5603, PDF page137. It supplies a dated company-level public-notice record, not a final current qualification or bearing/motor test certificate. Actual original government attachment, title and company row [8]

The homepage gives 32 Shengshan Road, Xuyi Economic Development Zone, Huai’an, +86 517 88299675, general-manager contact Huang Weidong (+86 15252360066) and sales contact Xu Zhenzhen (+86 15952370874). The actual dedicated contact page gives a different landline, +86 517 88293298, and mobile +86 18868660552 alongside 15252360066 at the same street address. Confirm which current commercial/engineering route to use. Actual dedicated contact and differences [10] A homepage news excerpt uses the different character 宇洋, while the company introduction/footer and government record use 虞洋; confirm the exact legal seller and receiving/production site from current documents. No enquiry was sent. Actual homepage contact and name variation [9]

YOUR NEXT STEP

Prepare a Yuyang motor-bearing qualification brief

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

0 model records

No documented models yet.

Try broader requirements, or explore the manufacturer’s published product scope.

Explore manufacturers →

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Actual official publicationJiangsu Yuyang · official company introduction ↗

    2014 history and appliance/pump/fan/tool focus; historical quality-control mode wording not present certification.

  2. Actual official category and live browser readJiangsu Yuyang · deep-groove category ↗

    Two deep-groove items plus needle-labelled item; category mix is not verified current manufacturing scope.

  3. Actual official detail and loaded illustration viewed in browserJiangsu Yuyang · deep-groove detail2 ↗

    Blank identifier/no usable rating table; illustration not a controlled engineering drawing.

  4. Actual official detail readJiangsu Yuyang · deep-groove detail10 ↗

    Generic family detail without readable candidate parameters; no inferred numerical performance.

  5. Actual official body readJiangsu Yuyang · service/support ↗

    No usable published service/warranty procedure or response guarantee established.

  6. Actual full browser text, 11 June2020Jiangsu Yuyang · railway application article ↗

    FAG/Schaeffler/AGC example concerns other suppliers; no Yuyang vehicle supply/approval inferred.

  7. Actual official publicationJiangsu Yuyang · honours ↗

    Body explicitly says no material; current certificate scope/status remains unverified.

  8. Original government PDF title and company row actually read by web toolGovernment-hosted · 2025 provincial specialized-SME second-batch notice list ↗

    175-page attachment, page137 row5603 exact name; public notice, not final/current product certification.

  9. Actual official publicationJiangsu Yuyang · homepage contacts and announcement excerpt ↗

    Shengshan Road and named phone routes; 宇洋 news excerpt differs from 虞洋 entity wording, requires legal-entity confirmation.

  10. Actual full browser contact readJiangsu Yuyang · dedicated contact ↗

    88293298 and 18868660552 differ from homepage routes; 15252360066 and Shengshan Road also published, present responsibility unverified.

Report a source correction → · Return to inquiry checklist ↑

Yuyang published product scope reviewed

The manufacturer website describes motor bearings and industrial bearing families.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:33

Source documentation retained for editorial review.