ZBO
ZBO focuses on CC spherical roller bearings and also publishes vibrating-screen bearings and cages. Separate complete bearings from components, confirm bore/suffix and mixed page labels, and require traceability through its explicitly outsourced heat-treatment process.
Define the bearing configuration and the process record together.
Wafangdian Zhongbao Bearing Manufacturing Co., Ltd. identifies CC spherical roller bearings as its main product. Its Chinese introduction also describes steel, copper and stainless-steel CC cages, seal steel skeletons and connecting rings. A component enquiry and a complete-bearing enquiry therefore need different drawings and acceptance requirements. Manufacturer’s actual product/component description [1]
First decide whether you need a complete CC bearing or a cage.
Complete CC bearing
The official CC page describes a stamped-steel cage, symmetrical rollers and a separate spacer. Use the complete designation and request the current assembly drawing, bore, clearance, lubrication arrangement and rating conditions. Its general comparison with CA designs does not approve a substitution in your machine. Actual CC construction and model table [2]
Separately supplied component
The Chinese introduction lists several cage materials, seal skeletons and connecting rings; the cage category has separate spherical, tapered and spherical-thrust routes. Specify the component drawing, material, pocket geometry, forming/finish and mating roller/ring arrangement. A cage photograph or catalogue family does not identify the complete bearing that will accept it. Published component scope [1] Actual cage categories [3]
The CC table includes 22224CC/W33, 22320CC/W33 and combined labels such as 22336CC/CCKW33. Preserve the full published code in your question and obtain a single, confirmed order designation. Table headings C, C0 and Weight do not state units in the inspected page, so this guide does not convert them into an approved load or mass specification. Actual labels and separate table fields [2]
A shared product page still contains two different bore designations.
The actual 22320EJA/VA405 detail explicitly separates a cylindrical-bore code from a tapered-bore code. The printed fields are useful for identifying the candidate, but the inspected headings do not display dimensional or mass units. Confirm those units on the controlled drawing before engineering approval. Actual model-detail fields [4]
| Published route | Exact designation | Fields shared by the page | Purchase question |
|---|---|---|---|
| Cylindrical bore | 22320EJA/VA405 | d 100 / D 215 / B 73; Mass 13.5 | Confirm bore tolerances, shaft fit and clearance for the offered item. |
| Tapered bore | 22320EKJA/VA405 | Same detail page; not a separate approved assembly drawing. | Confirm actual taper, mounting arrangement and required adapters/accessories. |
The vibrating-screen category also contains the headings “Bearings for Cold Pier Bearing” and “Bearings for cold pier machine”. Some VA406 rows leave bore-related fields blank. Do not fill these blanks from an adjacent VA405 row or treat the mixed application text as screen qualification. Send the precise row and machine duty to ZBO and ask for the applicable drawing and application review. Actual mixed headings and incomplete category fields [5]
For the review, include vibration/excitation conditions, radial and axial loads, speed, shaft/housing deflection, mounting constraints, lubricant and operating temperature. Ask the responsible engineer to state the required configuration, acceptance limits and validation method. No suffix meaning, equivalent brand or demonstrated operating life has been inferred here.
Keep the outsourced operation inside your traceability plan.
ZBO’s quality-control page explicitly labels heat treatment as outsourced. It describes releasing technical data to the supplier and contracting against the client’s request, alongside material reports and incoming-forging inspection. The general production-flow illustration should therefore not be read as proof that every operation occurs in-house. Actual outsourcing and material-control statement [6]
- Define the operation before the order. Ask which rings/rollers receive which material and heat-treatment specification, which operations are external, and which facility is responsible.
- Link the records. Require material/forging identity, heat-treatment batch identity and the agreed hardness, microstructure or other specified test results to follow the supplied components and finished lot.
- Control changes and release. Agree approval for changing the processor or process, incoming verification after outsourced work, nonconformance handling and final acceptance responsibility. Request the actual records, not only the flow chart.
The website explains a control approach; this research has not audited the external processor, examined an order-linked treatment report or accepted a bearing batch.
“100% inspection” needs a defined characteristic, method and result.
The company introduction describes online/first-piece checks and an ERP route that can hold abnormal parts. Its English factory page also describes roller flaw/burnishing inspection and machining-accuracy claims. These are manufacturer statements about process capability; they do not establish that every offered complete bearing is P4 or that your lot passed a defined acceptance test. Actual ERP and inspection description [1] Actual workshop/process claims [7]
Turn the inspection claim into an order-linked evidence request
Specify the critical dimensional/geometry and clearance characteristics; ask which are checked on every part, which by sampling and which on a first-piece basis. Request the method, calibrated equipment, acceptance limits, lot-linked result and disposition of rejected parts. If flaw detection is required, agree the applicable technique and rejection criterion. For a performance claim, require an identified bearing configuration and test duty with the actual report and your own application validation.
A capability paragraph is useful for planning this discussion. It is not a current certificate, independent audit, customer approval or guaranteed service life.
Confirm the visit, manufacturing and seller addresses separately.
The Chinese contact page gives Zhuhua Industrial Park, Wafangdian in the main contact block, while its footer gives 20-1 North Gongji Street, Wafangdian. Confirm which address serves manufacturing, visits, sales and dispatch before arranging an audit or shipment. The same page publishes +86 13322237215 (also WeChat), [email protected] and [email protected]. No enquiry has been sent during this research. Actual contact block and different footer address [8]
A QCC public record also lists the Chinese name 瓦房店中宝轴承制造有限公司 and a Zhuhua Industrial Park/Sanjia Village address. This is a secondary identity lead, not an independent factory audit or a verified current official-registry extract. Obtain the current legal entity/business licence and exact contracting/manufacturing sites directly; no authoritative current certificate or batch approval was established by the external-source search. Actual secondary corporate identity record [9]
Prepare a ZBO bearing-or-component enquiry
Tick what you have ready. Copy the full checklist with its current status for your procurement notes.
Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.
Documented models.
0 model recordsNo documented models yet.
Try broader requirements, or explore the manufacturer’s published product scope.
Explore manufacturers →Evidence, with boundaries.
Our review approach →Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.
- Official manufacturer descriptionZBO · Chinese company and component introduction ↗
CC focus, cage materials/components, ERP and inspection self-statements; not audited capability.
- Official actual table, checked in browserZBO · CC spherical roller bearing construction and table ↗
Complete codes and fields; missing printed units and broad CA comparison do not establish order approval.
- Official product categoriesZBO · roller bearing cage categories ↗
Spherical, tapered and spherical-thrust component routes; no mating interchangeability inferred.
- Official model detailZBO · 22320EJA/VA405 actual detail ↗
Separate cylindrical/tapered codes and printed numerical fields; units and mounting configuration need drawing confirmation.
- Official page, actual browser text checkedZBO · vibrating-screen category ↗
Mixed cold-pier headings and blank fields preserved; no missing data filled or application qualification invented.
- Official process disclosureZBO · quality-control process ↗
Explicit outsourced heat treatment, material reports and contractual process control; not actual batch records.
- Official manufacturer capability statementsZBO · workshop and inspection description ↗
Machining/roller inspection claims; no universal P4 finished-bearing grade, independent audit or accepted lot inferred.
- Official contact publicationZBO · Chinese dedicated contact page ↗
Zhuhua main block versus Gongji footer, phone and two emails; exact site roles require confirmation.
- Secondary corporate information platform, actual record readQCC · public ZBO corporate-name record ↗
Chinese name/address cross-check only; not an official-registry extract, certificate or independent factory audit.
Report a source correction → · Return to inquiry checklist ↑
No reviewed model or batch reports are available. Independent verification is not implied.