BearingIndex
THE BEARINGINDEX DIRECTORY

Zhongchuang

Zhongchuang: miniature and extra-miniature deep-groove bearings, with a guide to clarifying grouped model labels and validating motor/application samples.

ZHONGCHUANG · MINIATURE DEEP-GROOVE BEARINGS

Move from a grouped catalogue title to one approved motor-bearing build.

Ningbo Zhongchuang describes its speciality as miniature and extra-miniature deep-groove ball bearings, and names tolerance, clearance, starting current and consistency among its technical service topics. Company introduction [1] Those topics provide a useful qualification agenda, but the public product pages do not supply a complete ordered-part specification.

Prepare a sourcing inquiry
01

E-001 is a website item label. Which bearing will you receive?

The page titled “686, 696, 688” carries an E-001 model field and a medical-equipment category. Another page groups “6900Z, 628Z, 60/6.35Z” under E-002, while a separate 628Z entry is D-016 in small appliances. Grouped 686/696/688 [2] Grouped Z references [3] Separate 628Z [4] These labels identify useful inquiry routes; they do not establish that the references share dimensions, construction or an approved application.

Specify one offered construction

Quote the exact page/title and ask Zhongchuang to return one full designation, a dimensioned drawing and revision, ring/ball/cage material, closure, lubricant/fill, clearance and tolerance limits. Where 628Z appears in more than one entry, ask whether the actual supplied specification differs; a different site category is not evidence of a different physical bearing.

Clarify 60/6.35Z explicitly

That notation appears in the grouped title, but the reviewed page does not provide a readable dimensional/rating table. [3] Obtain the complete bore/outer-diameter/width and fit tolerances in agreed units. No geometry or equivalence is inferred here from the number alone.

02

Make starting current and consistency measurable in your assembly.

The company specifically mentions service relating to starting current, clearance and product consistency. [1] The following is BearingIndex’s buyer qualification route, not a claim that Zhongchuang has already performed these tests for your product.

  1. Describe the motor and interfaces. Give shaft/housing fits, speed, loading arrangement, temperature, operating cycle and relevant space. State the observed problem: starting behaviour, running noise, torque or premature failure.
  2. Agree the sample build and method. Record complete bearing construction, lubricant/fill and clearance. For starting-current evaluation, agree motor/drive conditions, supply, temperature, installation and numerical acceptance with the responsible engineer. A bare-bearing result is not the same as installed motor current.
  3. Compare under controlled conditions. Keep assembly and test conditions consistent, record sample/lot identities, and investigate installation or other assembly differences before attributing the result to the bearing alone.
  4. Release a traceable production specification. Agree drawing revision, dimensional/clearance checks, relevant torque/noise inspection and sampling/rejection criteria. Require notice and requalification for changes to the approved build rather than accepting an unspecified “same model”.

No sample test, life trial or factory audit has been conducted by BearingIndex. Any final motor design and acceptance remain application-specific.

03

A medical-equipment heading is not a device qualification.

The medical application page repeats the company’s broad list of sectors without identifying a particular device, exposure, cleaning/sterilisation requirement or validated bearing configuration. Medical application page [5] Keep the decision tied to the actual device drawing and operating conditions. If relevant, ask for material, cleanliness, lubricant and exposure evidence for that build and the documentation your approval process requires. Do not infer medical certification, patient-contact suitability or sterilisation compatibility from the category.

The same distinction applies to the named fans, vacuum cleaners, stepper motors and automotive uses in the company introduction. [1] A sector mention is a reason to ask a focused technical question, not evidence of a customer programme or a guaranteed fit.

04

Use dated records for identity, and current documents for qualification.

The official contact gives No. 888 Zhenluo West Road, Zhenhai, Ningbo. [6] A government-hosted 2024 technology-based SME record includes the exact Chinese name 宁波众创轴承有限公司, entry 1,638, number 2024330212A8004777. [7] This is entity context, not product approval or confirmation of the current manufacturing-site scope.

SMM’s dated 28 November 2024 IEMC event publication names Zhongchuang and booth N13-1. It states about 5,000 m² while the official company page states about 3,000 m². Event publication [8] [1] No current footprint or production capacity is selected from these different statements. Confirm the actual factory address and process scope before a visit or capacity assessment; the event notice is not a factory audit.

The official qualification section supplies no complete readable certificate details in the reviewed text, and the service page gives general quality/after-sales policy rather than a turnaround or warranty commitment. [1] Service policy [9] Request current certificates with issuer/site/scope where required, actual inspection equipment and calibration records, and written handling of nonconforming samples/lots. Current MOQ, price, stock and lead time were not verified.

Source access: the official site produced a certificate-name warning in the browser. Its public HTTP pages were read without bypassing that certificate warning; no login, inquiry or personal information was submitted to it.

YOUR NEXT STEP

Prepare one Zhongchuang miniature-bearing qualification request.

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

0 model records

No documented models yet.

Try broader requirements, or explore the manufacturer’s published product scope.

Explore manufacturers →

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Manufacturer publicationZhongchuang · company and qualification sections ↗

    Miniature focus, technical service topics and 3,000 m² statement; current capacity/certificates not verified.

  2. Manufacturer product entryZhongchuang · 686, 696, 688 / E-001 ↗

    Grouped title, item/category labels and general advice; not a complete model-specific specification.

  3. Manufacturer product entryZhongchuang · 6900Z, 628Z, 60/6.35Z / E-002 ↗

    Published grouped notation; dimensions, ratings and supplied build not inferred.

  4. Manufacturer product entryZhongchuang · 628Z / D-016 ↗

    Separate website label/category; no physical difference from another 628Z entry established.

  5. Manufacturer application statementZhongchuang · medical-equipment application ↗

    Sector positioning only; no device approval, exposure suitability or validated application identified.

  6. Manufacturer contact publicationZhongchuang · contact ↗

    Zhenluo West Road address; current factory/contract scope requires confirmation.

  7. Historical government entity recordZhejiang · 2024 technology-based SME list ↗

    Exact name, entry 1,638 and dated record; not bearing qualification.

  8. Dated organiser event publicationSMM · Zhongchuang IEMC 2024 event publication ↗

    28 November 2024 invitation/booth and 5,000 m² statement; not proof of current footprint, attendance or factory audit.

  9. Manufacturer policyZhongchuang · customer service ↗

    General quality/after-sales principles; no current service time, warranty terms or availability established.

Report a source correction → · Return to inquiry checklist ↑

Zhongchuang published product scope reviewed

The manufacturer website describes miniature and extra-small deep groove bearings.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:34

Source documentation retained for editorial review.