BearingIndex
THE BEARINGINDEX DIRECTORY

Zhongjing

SSZJ / Zhejiang Zhongjing: tapered-roller bearing and separately specified stamped or nylon cage enquiries.

SSZJ · TAPERED BEARINGS · CAGE ENGINEERING

Specify whether you need the complete bearing or the cage that makes it work.

Zhejiang Zhongjing describes its predecessor as Hangzhou Shenshi, founded in1995, and its Changshan registration as18October2018. Its public offering spans complete bearings and separately developed bearing cages. Treat those as different engineering and acceptance conversations: a finished-bearing catalogue number does not fully define an independently supplied cage. Exact company and manufacturing scope [1]

Prepare a sourcing inquiry
01

A bearing order and a cage order need different drawings.

Complete tapered-roller bearing

The official catalogue separates302,320,33,313,303,322,323,78,329 and J/L/JL/JM/LM routes. Start with the exact full reference, cone/cup combination, envelope and precision, then qualify the installed support and setting. The list establishes product families rather than interchangeable options or current stock. Actual tapered catalogue routes [2]

Cage as a separate component

The stamped category names angular-contact, needle and single-row tapered cages; the nylon category lists deep-groove, angular-contact and single-row tapered forms. Two angular-contact labels appear in the nylon menu, which does not itself establish two different specifications. Send the assembly and cage drawing, not only the parent bearing number. Stamped categories [3] Nylon categories [4]

Zhongjing’s homepage states a stamped-cage large-end diameter range of30–300mm and a monthly capacity of3 million pieces. Those are manufacturer range/capacity statements; the large-end diameter is not the bearing bore, and a total capacity statement is not an available production slot for your tooling and material. Ask for feasibility and scheduling for the actual cage. Original range and capacity wording [5]

02

30214 and30214/WD demonstrate why the suffix matters.

Actual SSZJ referencePrinted dynamic rating CrPrinted static rating CorWhat the comparison means
30214132.30kN173.60kNCompare the complete offered geometry and internal build, not just the reference root.
30214/WD120.50kN153.60kNThe same displayed bore, outside-diameter and height fields do not imply the same load ratings.

These are values from Zhongjing’s actual302 table, whose load columns are explicitly headed kN. The two entries share the displayed envelope fields but differ in weight and ratings. The reviewed table does not explain WD; obtain its controlled definition, internal geometry/material and complete offered drawing rather than expanding the suffix from another maker’s catalogue. Actual302 model table [6]

The same page separately lists30219 and30219/P5 with identical displayed load values. Treat the precision designation as a tolerance requirement requiring its own inspection report; it is not evidence of a higher load rating. Request the original controlled drawing with explicit dimension units, corner/radius clearance and complete cone/cup heights, then compare the shaft/housing and axial stack.

For the installed support, agree the actual opposed arrangement, assembly setting or preload/endplay requirement, lubricant and duty. Approve the complete assembly and traceable sample. The public table alone does not establish interchangeability with a different manufacturer's cone, cup or assembly adjustment.

03

Qualify pockets, guidance and material before approving the tool.

The reviewed single-row tapered stamped-cage and deep-groove nylon-cage pages display the product type and image/3D headings, but do not provide a populated numerical specification table. A heading or image is not a downloaded controlled3D file or a finished tolerance agreement. Actual stamped-taper detail [7] Actual nylon deep-groove detail [8]

ProjectDrawing/material briefSuggested acceptance evidence
Stamped cageComplete pocket geometry and spacing, thickness, guiding surfaces, permitted burr/edge condition and steel/coating specification.Tool/sample revision, dimensional and pocket/guidance inspection, assembly clearance and roller/ball retention trial; material/finish and lot record.
Nylon cageActual resin grade and reinforcement, moulded geometry/tolerances, conditioning and shrinkage requirements, lubricant/thermal/environmental duty.Material/conditioning traceability, dimensional and assembly test and actual application qualification; do not assume a generic nylon label specifies PA grade or temperature limit.
Repeat toolingTool ownership, approved cavities/revision, maintenance and permitted process/material changes.Traceable first-off samples, measurement plan and lot acceptance; reapproval trigger after material, mould/tool, process or site changes.

The table is BearingIndex buyer preparation advice arising from the actual two-component routes, not additional published Zhongjing tolerances or a claim that a particular resin, coating or tooling contract is already offered. Ask who owns cage design and validates behaviour in the completed bearing.

04

Read the2023 report as a dated account, then request today’s order records.

The original18-page 2023 Quality Integrity Report is dated5January2024 and defines its reporting period as1January–31December2023. Its introductory wording also mentions2021; preserve the cover and explicit period rather than treating every undated “currently” in the document as a2026 fact. Original report and dated cover [9]

  1. Inspection route: the report/company page name profile, roundness and length measurement, bearing vibration and metallography instruments. Request the methods, calibration and actual geometry/material/vibration results relevant to your bearing or cage, not a generic equipment list.
  2. Process and traceability: the report describes incoming checks, process/final release and production records organised by lot. Agree the actual sampling, nonconformance disposition and traceability of material, heat treatment, geometry and assembled build for the offered order.
  3. System scope: the report states IATF16949:2016 certification, but does not itself supply a current issuer-status result, full certificate/site annex or design responsibility. Obtain those records before relying on current automotive system status.
  4. Claims and planned recognition: the report says Zhejiang Made certification is being prepared. A plan is not an issued certificate. Its100% inspection/pass and customer claims are manufacturer assertions, not independent BearingIndex results or permission to present customer endorsements.

A dated1March2024 industry-platform company feature describes machining, heat-treatment, grinding, stamping and assembly workshops. That company feature is supplementary published context, not an independent site audit or proof of today's capacity for the quoted part. Reconcile actual in-house/purchased/subcontracted operations and offered-site responsibilities. Dated industry-platform feature [10]

05

Tie the Changshan quotation to the tested revision and responsible entity.

The official contact page gives Huibu New District, Huibu Town, Changshan, Quzhou, Zhejiang, phone0570-5158291 and [email protected]. The website header separately gives [email protected] and the footer also retains0571 numbers. Ask which authorised contact and entity handles manufacturing, export, tooling and quality support for the order; older/predecessor contact information should not silently substitute for the current contract/site. Actual current contact publication [11] Predecessor/registration statement [1]

Release a trial against the approved bearing reference or cage drawing, material/tool revision, inspection plan and sample acceptance. Confirm quantities, sample and tooling charges, MOQ, dated production availability, packaging, delivery and nonconformance handling. Do not infer these terms from a published total capacity or a platform credit score.

For repeat supply, preserve the sample lot and controlled drawing/BOM; specify what changes require notification, remeasurement or installed requalification. This is especially important when identical outer dimensions conceal a different internal bearing design or when a cage mould/material changes.

YOUR NEXT STEP

Prepare a Zhongjing bearing or cage enquiry

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

0 model records

No documented models yet.

Try broader requirements, or explore the manufacturer’s published product scope.

Explore manufacturers →

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Manufacturer publicationZhongjing · company scope and predecessor ↗

    HangzhouShenshi history, Changshan registration and bearing/cage manufacturing statements; customer assertions not independent endorsement.

  2. Manufacturer catalogueZhongjing · tapered-roller catalogue routes ↗

    Actual metric/inch/family menu, not stock/interchangeability.

  3. Manufacturer component catalogueZhongjing · stamped-cage categories ↗

    Angular-contact, needle and tapered routes; exact drawing required.

  4. Manufacturer component catalogueZhongjing · nylon-cage categories ↗

    Deep-groove/angular-contact/tapered routes; duplicate label not proof of distinct specifications.

  5. Manufacturer range/capacity statementsZhongjing · stated stamped-cage range ↗

    30–300mm large-end diameter and3million/month assertion, not bearing bore or available slot.

  6. Manufacturer model-level tableZhongjing · original302 model table ↗

    30214/WD actual separate kN ratings and30219/P5 entries; explicit controlled drawing/units and suffix meaning to obtain.

  7. Manufacturer component detailZhongjing · stamped tapered-cage detail ↗

    Actual page lacks populated numerical table; image/3D headings not controlled file downloaded.

  8. Manufacturer component detailZhongjing · nylon deep-groove cage detail ↗

    Actual route without populated numerical table; resin/conditioning/tool parameters to confirm.

  9. Original manufacturer PDF, read and cover renderedZhongjing ·2023 Quality Integrity Report ↗

    18pages, dated5January2024/reportperiod2023; IATF and quality claims not current issuer receipts; ZhejiangMade preparation not certificate.

  10. Dated company feature on industry platformBailian industry platform · Zhongjing company feature ↗

    1March2024 five workshop description; supplementary company context, not independent factory audit or currently available capacity.

  11. Manufacturer contact publicationZhongjing · Changshan contacts ↗

    Actual0570phone/zjzcemail/site versus header/footer alternatives; authorisation/contracts to confirm.

Report a source correction → · Return to inquiry checklist ↑

Zhongjing published product scope reviewed

The manufacturer website describes tapered roller bearings and cages.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:34

Source documentation retained for editorial review.