BearingIndex
THE BEARINGINDEX DIRECTORY

ZJYB

ZJYB / Ningbo Yiben: miniature motor-bearing enquiries with an expressly stated 608ZZ production focus and application-labelled product examples.

ZJYB · 608 FOCUS · APPLIANCE AND SMALL MOTORS

Approve the 608 build for your motor’s duty, then lock the production specification.

Ningbo Yiben describes miniature-bearing research, manufacture and sales, explicitly naming 608ZZ as its main production model. The company addresses air-conditioner and vacuum-cleaner motors, appliance and automotive motors; its product site also organises enquiries by power tool, reducer and office-automation use. Those routes help start a discussion, while the selected motor position and released bearing specification determine approval. Company and production focus [1]

Prepare a sourcing inquiry
01

A repeated 608RS listing is an enquiry route, not a complete purchasing specification.

The company introduction identifies 608ZZ as the main production model. Separately, the automotive and air-conditioner product details both display 608RS, without a complete dimension, clearance, lubricant or performance table in the product description reviewed. Obtain the offered drawing and build specification instead of supplying missing values from another manufacturer’s catalogue. 608ZZ statement [1] Automotive 608RS detail [2] Air-conditioner 608RS detail [3]

Release one controlled sample definition.

State the complete closure arrangement on both sides, seal contact structure, ring/ball and cage materials, lubricant identity/fill, internal clearance and applicable dimension/runout requirements. Include shaft/housing fits, retention and assembly method. Neither RS nor ZZ alone defines an approved low-noise or low-torque build.

Ask Yiben to quote samples against that revision and identify how sample lots relate to the proposed production line and BOM. Retain the approved build, test conditions and change-control agreement when moving from samples to a repeat order.

02

Use the application menu to choose a qualification trial, not to assume fitment.

Published routeActual examples displayedBuyer’s trial should establish
Vacuum-cleaner bearings604Z, 608RS, 693Z, 696Z, 698ZMeasured speed/load spectrum, start-stop duty, warmed motor temperature, noise/torque and lubricant behaviour under the actual ventilation and contamination conditions.
Air-conditioner bearingsTwo separately listed 608RS itemsNoise in the installed fan/motor, fit/clearance and running temperature across the intended operating modes; defined humidity/condensation exposure if relevant.
Reducer bearings608RS, 628Z, 6804Z, 6903RS, 6904RSBearing position, radial/axial load path, lubricant compatibility, housing retention and reversal/shock duty in the assembled reducer.

These are the website’s displayed references, not a fitment list, stock confirmation or guaranteed performance. The two air-conditioner entries do not state the difference between their builds; request that distinction when enquiring. Vacuum-cleaner list [4] Air-conditioner list [5] Reducer list [6]

Replacing a noisy motor bearing

Send full markings, motor revision, position and failure history. Record shaft/housing condition and operating evidence before deciding that a higher precision label alone will solve the fault. Agree a bearing bench test and an assembled-motor test so their results remain distinguishable.

Qualifying a new appliance build

Send the duty cycle, interfaces and numeric acceptance requirements before requesting samples. Compare the offered build under the same mounted conditions, then agree a production acceptance plan and how seal, grease or clearance changes trigger requalification.

03

The issuer query identifies a specific workshop and two different validity dates.

Yiben publishes Chinese and English ISO9001 certificate images. The displayed record identifies 88526Q8171R1SIASMSCB325, Ningbo Yiben Bearing Co., Ltd / 宁波一本轴承有限公司, GB/T19001-2016 / ISO9001:2015, and production and sales of bearings. The registered/audited site is the west side of room 2-2, south block of building 4, Jiaochuan intelligent-manufacturing industrial park, Mianfeng Road 666, Zhenhai. Manufacturer’s certificate publication [7]

On 8 October 2026, entering the exact company and certificate number in Hangzhou Bangzheng’s query returned valid, issue date 10 July 2026, current validity period to 9 July 2027, and expiry date 26 June 2029. Preserve both date fields rather than interpreting the later expiry as an unconditional promise through 2029. Recheck status and supplied-site coverage before placing the order. Issuer’s certificate query [8]

This verifies the returned management-system record and stated scope at the review date. It does not approve automotive, medical or other application performance, certify every bearing specification, or demonstrate an independently audited capacity. Ask which plant and operations produce the proposed sample and order.

04

Turn the small-motor sample into repeatable lot acceptance.

The workshop gallery labels production areas and a Rockwell/Vickers hardness tester. Use that route to request the offered part’s process map, material/heat-treatment traceability, applicable hardness method, calibrated geometry/runout checks and noise/torque control plan. Gallery labels are not instrument capability or calibration results. Workshop publication [9]

  1. Agree the test recipe: specify mounted versus bearing-only measurement, load, speed, temperature/warm-up, fixture and numerical acceptance; keep motor and bearing results separate.
  2. Trace the samples: record complete part/BOM revision, material/grease lots, production date and test report identifiers; retain accepted reference samples.
  3. Control production changes: agree sampling, lot documentation, segregation/nonconformance handling and notification before changing materials, seals, lubricant, clearance or manufacturing site.

The company describes monthly design capacity; that is not available production capacity, a measured current output or an assured delivery slot. Its electronic-catalogue page did not expose a downloadable specification during this review. Request a current controlled catalogue/drawing and dated quotation rather than inferring missing model parameters or lead times. Capacity wording [1] Electronic-catalogue route [10]

The official contact page gives Mianfeng Road 666, 0574-86276228 and [email protected]. Match the quotation, invoice and manufacturing workshop to the verified legal name and specific site; confirm the authorised commercial contact and warranty/change responsibilities. Contact publication [11]

YOUR NEXT STEP

Send Yiben a motor-duty and production-release brief

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

0 model records

No documented models yet.

Try broader requirements, or explore the manufacturer’s published product scope.

Explore manufacturers →

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Manufacturer publicationYiben · company introduction ↗

    608ZZ main production model, miniature scope and design-capacity wording; no current output/availability inferred.

  2. Manufacturer product displayYiben · automotive 608RS detail ↗

    Application label and model; reviewed description has no complete specification/performance table.

  3. Manufacturer product displayYiben · air-conditioner 608RS detail ↗

    Same designation in another application; exact build difference and motor fitment not established.

  4. Manufacturer application listYiben · vacuum-cleaner bearing list ↗

    Actual references read individually; no speed, noise or service-life guarantee.

  5. Manufacturer application listYiben · air-conditioner bearing list ↗

    Two 608RS entries; build distinction not stated in reviewed descriptions.

  6. Manufacturer application listYiben · reducer bearing list ↗

    Displayed references only, not verified reducer/OEM fitment or load approval.

  7. Manufacturer document publicationYiben · certificate images ↗

    Chinese and English originals visually read; detailed site, standard, number and dates checked separately against issuer query.

  8. Primary certificate issuerHangzhou Bangzheng · certificate query ↗

    Exact company/88526Q8171R1SIASMSCB325 query on 2026-10-08 returned valid; current period to 2027-07-09, expiry 2029-06-26.

  9. Manufacturer facility publicationYiben · workshop gallery ↗

    Production-area and Rockwell/Vickers instrument labels; no measurement capability/calibration audit inferred.

  10. Manufacturer catalogue routeYiben · electronic-catalogue page ↗

    No downloadable controlled specification exposed during this review; does not imply none exists.

  11. Manufacturer contactsYiben · official contact page ↗

    Mianfeng Road 666 and official contact route; detailed certified workshop and order scope require matching.

Report a source correction → · Return to inquiry checklist ↑

ZJYB published product scope reviewed

The manufacturer website describes miniature motor bearings.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:34

Source documentation retained for editorial review.