BearingIndex
0For manufacturers
THE BEARINGINDEX DIRECTORY

7013AC — 65 × 100 × 18 mm

BOUNDARY DIMENSIONSUNIT / mm
B = 18 mmD = 100 mmd = 65 mm
Boundary dimensions · schematic, not a product photograph or manufacturing drawing.
Angular contact

7013AC

7013AC is a angular contact designation documented on BearingIndex from 1 manufacturer publication. The published boundary dimensions are 65 × 100 × 18 mm. The designation ends in bore code 13, which resolves to a 65 mm bore under ISO 15 and matches what the manufacturers published. The publishing works are in Zhejiang province, China. Every value below comes from that manufacturer’s own published material, with the date it was recorded.

Bore d
65 mm
Outside D
100 mm
Width B
18 mm

Compare the 1 publication

What each manufacturer published.

ManufacturerLimiting speed — oil (rpm)Minimum corner radius (mm)Source recorded
UTE
7013AC		76801.12026-09-24Request

A dash means that manufacturer did not publish the value. Dimensions every source agrees on are shown above rather than repeated per row.

Calculated from the published values.

FigureHow it is obtainedResult
Radial section height(D − d) / 217.5 mm
Mean diameter dm(D + d) / 282.5 mm
Speed factor dm · nmean diameter × highest published limiting speed633,600 mm·min−1

Arithmetic on the figures above — not a bearing life calculation for your load case.

The works that publish 7013AC.

UTE

Taizhou, Zhejiang, China

Precision angular contact spindle bearings

Zhejiang UTE specializes in precision angular contact ball bearings. Its Taizhou production operation addresses machine-tool spindles and other precision rotating equipment. The published range includes open and sealed spindle designs, with steel-ball and ceramic-ball options in selected series. Contact angle, preload and matching arrangements need to be specified for the intended spindle.

Published ranges: Precision angular contact ball bearings · Open spindle-bearing series · Sealed spindle-bearing series

2 designations documented here · 1 reviewed evidence record · source recorded 2026-09-24

Ask UTE about 7013AC

Applications the publishing works state.

ApplicationStated by
High-speed spindlesUTE
Instrument motorsUTE
Medical equipmentUTE
Precision machine toolsUTE

Application areas each manufacturer states for its own range. Confirm load, speed, temperature and lubrication for your case.

Not documented by any source here.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Dynamic load rating · Static load rating · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Limiting speed — grease · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter · Reference mass.

Ask the manufacturer for these when you enquire.

Other designations with the same 65x100x18 mm envelope.

DesignationBearing familyWorks
6013Deep groove ball2
6013-2RZDeep groove ball1
6013TBDeep groove ball1
H7013-AC-TA-HQ1-P4Angular contact1
H7013-AC-TA-P4Angular contact1
H7013-C-TA-2RZ-HQ1-P4Angular contact1
H7013-C-TA-HQ1-P4Angular contact1
H7013-C-TA-P4Angular contact1
N1013 KCylindrical roller1

Same envelope, but sealing, internal design, clearance and load capability differ — not interchangeable by default.

Request a quote for 7013AC.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

Continue your search.

All angular contact models →About this bearing type →How to read evidence →