BearingIndex
THE BEARINGINDEX DIRECTORY

UTE

Zhejiang UTE manufactures precision angular-contact bearings. Its SH and B spindle series can share the same envelope while specifying different lubrication, internal designs and catalogue speeds. Select the complete construction against the spindle’s preload, thermal behaviour and lubrication system before approving a replacement.

UTE · PRECISION SPINDLE SERIES AND LUBRICATION

A matching bearing envelope does not settle the spindle replacement.

Zhejiang UTE Bearing Co., Ltd. (浙江优特轴承有限公司) publishes precision angular-contact bearings with steel or ceramic balls and P4/P2 positioning. Its H, SH and B series target different constructions and operating conditions. Start with the actual spindle arrangement and the complete bearing designation, then agree the drawing and validation conditions with engineering. Company and product scope [1]

Prepare a sourcing inquiry
01

Compare the lubrication basis before comparing speed.

UTE lists SH7020C-2RZ and B7020C at the same 100 × 150 × 24 mm envelope. Their published ratings and lubrication bases differ. The following figures describe these catalogue entries; they are not an approval for your installed spindle. Actual SH7020C-2RZ detail [2] Actual B7020C detail [3]

Catalogue pointSH7020C-2RZB7020C
Envelope, d × D × B100 × 150 × 24 mm100 × 150 × 24 mm
Published Ca / Coa43.90 / 42.00 kN45.4 / 48.1 kN
Published lubrication basisGreaseOil
Steel-ball limit speed9,600 rpm12,000 rpm
Ceramic-ball limit speed16,000 rpm19,200 rpm
Design emphasisDouble-slope ring design and lubricant space; phenolic or TN1 cage options described.Internal-grinding spindle design, constant-pressure preload and oil-mist/oil-air use described.

Supply the existing complete marking, stack arrangement, preload mechanism, oil or grease system, shaft/housing fits, acceleration cycle and permissible temperature rise. Ask UTE to identify the proposed series and justify its operating-speed envelope under those conditions. A ceramic-ball version or a higher catalogue speed does not by itself justify changing the lubrication system or replacing a sealed grease bearing with the B construction.

02

Freeze the contact angle, ball material, cage and seal drawing.

The H7019C-2RZ detail lists 95 × 145 × 24 mm, C for 15° and AC for 25°, outer-ring-guided phenolic cages and HQ1 ceramic-ball wording. The SH page additionally describes a ball-guided polyamide TN1 option. These are construction choices to put into the quoted designation and drawing, not options to infer from a basic bore code. Confirm the actual accuracy grade, materials, ball configuration, cage, lubricant and seal arrangement. Actual H7019C-2RZ detail [4] SH cage options [2]

Resolve the seal wording with the supplier. The H70 description calls its seals non-contact, while the B719 page describes “contact seals (2RZ).” The same text also describes oil-mist/oil-air use. The published wording does not settle the quoted part’s seal construction or oil path. Obtain a controlled cross-section and confirm contact/non-contact behaviour, friction and lubricant supply before placing an order. Do not silently correct the catalogue wording or assume every 2RZ entry is identical. H70 seal description [4] Actual B71910 detail and seal wording [5]

The B71910 entry is 50 × 72 × 12 mm and lists oil-based limit speeds of 20,000 rpm with steel balls and 36,000 rpm with ceramic balls. Request the actual speed/preload/temperature qualification for that variant. If buying a matched set, agree arrangement, matching identifiers, preload class or force, face orientation, spacers and installation instructions in the supplier-approved drawing.

03

Validate the bearing set with the spindle’s thermal and lubrication system.

The B70 and B719 descriptions specifically refer to constant-pressure preload and oil-mist/oil-air lubrication. Supply the spring or other preload mechanism, cold/hot preload targets and shaft/housing thermal behaviour. Ask engineering to confirm the selected bearing set, mounting fits and lubrication delivery as one assembly. A P4/P2 label does not resolve these assembly choices. B70 operating description [3] B719 operating description [5]

  1. Agree the design package. Freeze full designations, set orientation, preload, fits, shoulder geometry, seals, lubricant and drawing revisions.
  2. Agree the component evidence. Specify applicable dimensional/runout and matching checks, measurement methods, traceable sample identities and acceptance limits.
  3. Run the spindle trial. Define run-in, speed steps, acceleration/load duty, cold/hot runout, temperature rise, vibration and lubricant-delivery checks; record the actual test configuration.
  4. Release repeat supply. Link the accepted set to production lot records, packaging/handling instructions and change notification for design, material, cage, seal, lubricant or process.

UTE’s research page contains historic staffing/equipment claims and an “Eleventh Five-Year” development plan. Its download page lists a sample dated 18 November 2020 and asks for information before download. Use these as routes to request current engineering material; they do not establish today’s staffing, test capability or the current revision of your quoted part. Request the latest controlled catalogue and the candidate-specific test plan directly. Actual research publication [6] Actual dated download listing [7]

04

Connect the quote to the manufacturing site and responsible engineer.

The national standards platform names Zhejiang UTE among the drafting organisations for the project that produced GB/T 296-2015, double-row angular-contact ball bearing boundary dimensions. This is evidence for a specific drafting contribution, not certification of every spindle product or proof of a delivered lot’s P2 accuracy. Actual national standard project record [8]

A 5 August 2024 Zhejiang tax-authority factory report describes automated production and a move toward new-energy-vehicle bearings. Treat it as dated evidence of factory activity and business direction. Obtain the current model, completed validation, manufacturing route and allocated schedule for an EV enquiry; the report does not supply an OEM approval or current order capacity. Actual dated government factory report [9]

Taizhou manufacturing route

The official service page lists the headquarters at Xinqiao Town Industrial Park, Luqiao District, Taizhou, Zhejiang. Telephone: 0576-82520888 / 89205199. Email: [email protected] or [email protected]. Confirm the exact drawing-review and sample-receiving contacts and address.

Regional sales route

The same page lists Shanghai marketing and Guangzhou, Shenzhen and Changzhou offices, plus a Taiwan distributor. A regional sales address is not automatically the manufacturing or inspection site. Confirm the contracting entity, production site, quality owner and who signs the technical approval.

Request a written quote identifying the complete bearing/set configuration, sample and serial quantities, schedule, applicable current certificates, lot evidence, packaging, warranty and technical support scope. Actual service and contact directory [10]

YOUR NEXT STEP

Prepare a UTE spindle-bearing enquiry

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

2 model records
Model / bearing familyManufacturerBore dOutside DWidth B / T / LDetails

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Official company publicationUTE · company introduction ↗

    Precision angular-contact positioning and company history; advertised production figures not current allocation.

  2. Official model detail, also read in browserUTE · SH7020C-2RZ ↗

    100×150×24 mm, Ca/Coa, grease-based steel/ceramic speeds and cage choices.

  3. Official model and series detailUTE · B7020C ↗

    Same envelope, oil-based speeds, ratings and constant-pressure preload/internal-grinding route.

  4. Official model and series detailUTE · H7019C-2RZ ↗

    Envelope, C/AC, HQ1, cage and non-contact seal wording.

  5. Official model and series detailUTE · B71910 ↗

    Envelope, oil-based speed figures and published seal/preload wording; controlled construction requires confirmation.

  6. Official historical research descriptionUTE · research centre ↗

    Contains Eleventh Five-Year plan and historic staffing/equipment claims; not current candidate validation.

  7. Official dated listingUTE · download centre ↗

    18 November 2020 sample and information form; downloadable document contents not used as evidence.

  8. Primary national standards recordSAMR · double-row angular-contact boundary-dimension standard project ↗

    Specific drafting organisation and published GB/T296-2015 project; not product/lot certification.

  9. Primary report dated 5 August 2024Zhejiang tax authority · Taizhou Luqiao factory report ↗

    UTE automation and EV direction at that date; no OEM approval or current capacity commitment.

  10. Official manufacturing and regional contact publicationUTE · service and contact directory ↗

    Taizhou headquarters/manufacturing contact, regional sales offices and Taiwan distributor.

Report a source correction → · Return to inquiry checklist ↑

UTE published product scope reviewed

The manufacturer website describes precision angular contact spindle bearings.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:33

Source documentation retained for editorial review.