BearingIndex
THE BEARINGINDEX DIRECTORY

71914 — 70 × 100 × 16 mm

BOUNDARY DIMENSIONSUNIT / mm
B = 16 mmD = 100 mmd = 70 mm
Boundary dimensions · schematic, not a product photograph or manufacturing drawing.
Angular contact

71914

71914 is a angular contact designation documented on BearingIndex from 1 manufacturer publication. The published boundary dimensions are 70 × 100 × 16 mm. Every value below comes from that manufacturer’s own published material, with the date it was recorded.

Bore d
70 mm
Outside D
100 mm
Width B
16 mm

Compare the 1 publication

What each manufacturer published.

ManufacturerSource recorded
ZYS
71914
2026-09-22 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.

Calculated from the published values.

FigureHow it is obtainedResult
Radial section height(D − d) / 215 mm
Mean diameter dm(D + d) / 285 mm

Arithmetic on the figures above — not a bearing life calculation for your load case.

The works that publish 71914.

ZYS

Precision and special bearings

ZYS publishes precision bearings, screw-support components and complete spindle units, alongside inspection and analysis services. Decide which product or laboratory deliverable is required, then agree its drawing, duty and acceptance records. Confirm the responsible supply or testing entity and the scope of any claimed standard or laboratory service.

87 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask ZYS about 71914

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Dynamic load rating · Static load rating · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Limiting speed — grease · Limiting speed — oil · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter · Reference mass.

Ask the manufacturer for these when you enquire.

Other designations with the same 70x100x16 mm envelope.

DesignationBearing familyWorks
6914Deep groove ball1
H71914-AC-TA-2RZ-HQ1-P4Angular contact1
H71914-AC-TA-HQ1-P4Angular contact1
H71914-AC-TA-P4Angular contact1
H71914-C-TA-HQ1-P4Angular contact1
H71914-C-TA-P4Angular contact1

Same envelope, but sealing, internal design, clearance and load capability differ — not interchangeable by default.

Neighbouring designations documented here.

DesignationEnvelope d × D × B (mm)Bearing familyWorks
71800AC10 × 19 × 5Angular contact1
71800C10 × 19 × 5Angular contact1
71801AC12 × 21 × 5Angular contact1
71801C12 × 21 × 5Angular contact1
71802AC15 × 24 × 5Angular contact1
71802C15 × 24 × 5Angular contact1
71803AC17 × 26 × 5Angular contact1
71803C17 × 26 × 5Angular contact1
71804AC20 × 32 × 7Angular contact1
71804C20 × 32 × 7Angular contact1
71805AC25 × 37 × 7Angular contact1
71805C25 × 37 × 7Angular contact1
71806AC30 × 42 × 7Angular contact1
71806C30 × 42 × 7Angular contact1
71807AC35 × 47 × 7Angular contact1
71807C35 × 47 × 7Angular contact1
71808AC40 × 52 × 7Angular contact1
71808C40 × 52 × 7Angular contact1

Each envelope shown is that designation’s own published size.

Request a quote for 71914.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. ZYS · 71914 source ↗

    Directory record dated 2026-09-22. Confirm the current complete designation and controlled drawing with this manufacturer.