BearingIndex
THE BEARINGINDEX DIRECTORY

LM50LUU — 50 × 80 × 192 mm

BOUNDARY DIMENSIONSUNIT / mm
L = 192 mmD = 80 mmd = 50 mm
Boundary dimensions · schematic, not a product photograph or manufacturing drawing.
Linear bearings

LM50LUU

LM50LUU is a linear bearings designation documented on BearingIndex from 2 manufacturer publications. The published boundary dimensions are 50 × 80 × 192 mm. The publishing works are in Zhejiang province, China. Every value below comes from that manufacturer’s own published material, with the date it was recorded.

Bore d
50 mm
Outside D
80 mm
Length L
192 mm

Compare the 2 publications

What each manufacturer published.

ManufacturerReference mass (kg)Source recorded
Kaiyade
LM50LUU
—2026-09-24 source ↗Request
YTP
LM50LUU
3.12026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.

Calculated from the published values.

FigureHow it is obtainedResult
Radial section height(D − d) / 215 mm
Mean diameter dm(D + d) / 265 mm

Arithmetic on the figures above — not a bearing life calculation for your load case.

The works that publish LM50LUU.

Kaiyade

Lishui, Zhejiang, China

Linear bearings and motion components

Individually reviewed ball-screw procurement: actualSFU image1605-4 d16 lead5 nutL50 circuits4 versus1610-3 d16 lead10 L57 circuits3 bothstarlefthelixoption; textC5/C7,P2 and0-6m capability notactualstock, importedTBIversusdomesticnotallownmanufacture; S55Cwording needscontrolledmaterial;1m unmachinedprice/nutseparate; HGHversusSBRguidebase/height/blockmatching; BKBFsupport/setBOM notautomaticsystemapproval; government2022Sept9surveyannexpage9entry31 plannedsecondbatch notachievedgrade/currentcert; Shiting15Lv18967090968.

Published ranges: LM, LME and KH linear-bearing series · Rod-end bearings · Supported linear rails and shafts · Ball screws and support units

22 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Kaiyade about LM50LUU

YTP

Ningbo, Zhejiang, China

Linear ball bearings and support units

YTP offers a linear-motion catalogue, cross-reference table and selection interface. The LM20UU/MX length difference and explicit reference-only MX sizes show why a replacement needs full interfaces and availability confirmation; qualify the shaft, alignment, load distribution and lubrication together, then reconcile calculation assumptions and applicable standard editions.

Published ranges: Standard and flanged linear ball bearings · Nickel-plated and steel-cage variants · Boxed linear-bearing units · KH drawn-cup linear bearings

287 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask YTP about LM50LUU

Applications the publishing works state.

ApplicationStated by
Linear-motion systemsYTP

Application areas each manufacturer states for its own range. Confirm load, speed, temperature and lubrication for your case.

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Dynamic load rating · Static load rating · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Limiting speed — grease · Limiting speed — oil · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.

Ask the manufacturer for these when you enquire.

Neighbouring designations documented here.

DesignationEnvelope d × D × B (mm)Bearing familyWorks
LM50—Linear bearings1
LM50L—Linear bearings1
LM50UU—Linear bearings1
LM50UU-AJ—Linear bearings1
LM50UU-OP—Linear bearings1

Each envelope shown is that designation’s own published size.

Request a quote for LM50LUU.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. Kaiyade · LM50LUU source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  2. YTP · LM50LUU source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.