BearingIndex
THE BEARINGINDEX DIRECTORY

Linear bearings.

Linear-motion ball bearings, flanged bushings and guide assemblies. Confirm shaft size, mounting and travel requirements.

Select using the exact manufacturer model, load conditions and documented specifications.

Find documented models
MODEL-LEVEL RESEARCH

Start with the specification.

Explore the documented models below, or ask a manufacturer for drawings and available dimensions.

Published 2026-10-18

Replacing a linear bushing: follow the shaft, housing and retaining grooves

Start at the shaft and work outwards. A linear bushing has to match the shaft diameter, the housing bore, the installed length and the way it is retained. In YTP's unsealed LM30 table, the nominal dimensions are dr 30 mm, D 45 mm and L 64 mm. The outer retaining-groove dimension B is 44.5 mm; it is not the overall length. A housing selected from “30 mm linear bearing” alone leaves those installation features unspecified. [1]

Trace the existing assembly in this order

1. Shaft → bore dr. Identify the shaft size and the complete old bearing designation. Use the selected maker's tolerances rather than applying the nominal number as a machining tolerance.

2. Housing → D and L. Record the available housing bore and axial space. If the bearing is held by external retaining grooves, include the groove positions and retaining arrangement on the drawing; do not substitute B for L.

3. Closure → complete suffix. YTP's catalogue distinguishes the unsealed LM route from LM…UU. In its construction table, LM…M refers to a stainless-steel cage, while the listed outer shell and balls remain GCr15. An M suffix in this YTP table does not establish an all-stainless bearing, and another manufacturer's M may mean something else. [1]

4. Installation → retention and alignment. YTP's installation guidance says not to lock a set screw directly against the outer ring, and to insert the guide shaft in alignment rather than forcing it in at an angle. This is particularly relevant when an existing housing relies on a screw pressing the bearing body: preserve the actual arrangement in the enquiry and get a suitable retaining design confirmed. [2]

Keep the load unit visible

YTP's LM30 row gives C 160 kgf and C₀ 220 kgf. Do not paste those numbers into kN columns. They are catalogue ratings for the stated bearing, not the mass a complete moving assembly may carry. The row also has tolerances and a radial-runout heading; none of these supplies the missing shaft support layout, load direction or machine life requirement. [1]

The distinction changes what to send the supplier: a drawing locating the shaft, housing and stops; the complete closure/material configuration; travel and load direction; and the actual temperature and contamination conditions. A proposed replacement can then be checked against those interfaces. A matching dr/D/L list by itself does not settle the retaining grooves or the material construction.

Read the appropriate model next

LM30 provides separate source and construction notes for the standard-envelope question. LM12S addresses a different problem: shortening a Hengli LM12M installation, with its own retention and published-load differences. Do not carry YTP's suffix meanings or load ratings across to Hengli.

YTP's current catalogue visibly includes standard, short, adjustable, open, extended and flanged linear-bearing routes. That is a useful supplier-navigation map, not proof of current inventory or equal suitability. For a multi-source comparison of extended bushings, the directory also has LM10LUU and LM12LUU, each with two manufacturer records. This is the highest source count in the current linear-category inventory. Compare the manufacturer rows separately; additional sources do not make their products interchangeable. The standard LM30 and short LM12S links answer the specific tasks above; each currently has one manufacturer record plus an individual guide. [1]

Sources and scope

1. YTP standard unsealed LM catalogue, redirected to http://product.ytp-bearing.com/product/DataTables/374: actual LM30 row, mm filters, groove dimensions, kgf headings and component-level variant table; read 18 October 2026.

2. YTP clearance selection and fixing guidance, dated 4 August 2023: mounting and retention instructions; read 18 October 2026. No universal fit, preload or lubricant grade has been assigned to every listed linear bearing.

Dimensions to start with.

346 documented models
Model / bearing familyManufacturerBore dOutside DWidth B / T / LDetails

A published bearing family describes product scope. It does not imply that every size or material is available.

Hengli Linear

Linear-motion ball bearings

Published product scope · confirm exact model availability

YTP

Linear ball bearings and support units

Published product scope · confirm exact model availability

DZH

Linear bearings and guided-motion components

Published product scope · confirm exact model availability

Chuangda

Linear bearings and ball-screw support products

Published product scope · confirm exact model availability

Shengjie

Linear bearings and guided-motion assemblies

Published product scope · confirm exact model availability

Jinzheng

Rod ends, spherical plain and linear bearings

Published product scope · confirm exact model availability

OUY

Linear motion bearings and joint-bearing components

Published product scope · confirm exact model availability

Siqiang

Linear bearings, rod ends and track rollers

Published product scope · confirm exact model availability

Wuling

Linear and spherical plain bearing systems

Published product scope · confirm exact model availability

Kaiyade

Linear bearings and motion components

Published product scope · confirm exact model availability

Jingjiu

Spherical plain bearings and linear motion

Published product scope · confirm exact model availability