THE BEARINGINDEX DIRECTORY

LME50UU — 50 × 75 × 100 mm

BOUNDARY DIMENSIONSUNIT / mm

Boundary dimensions · schematic, not a product photograph or manufacturing drawing.

Linear bearings

LME50UU

LME50UU is a linear bearings designation documented on BearingIndex from 1 manufacturer publication. The published boundary dimensions are 50 × 75 × 100 mm. The publishing works are in Zhejiang province, China. Every value below comes from that manufacturer’s own published material, with the date it was recorded.

Bore d: 50 mm
Outside D: 75 mm
Length L: 100 mm

Compare the 1 publication

What each manufacturer published.

Manufacturer	Reference mass (kg)	Source recorded
YTP LME50UU	1.13	2026-09-24	Request

A dash means that manufacturer did not publish the value. Dimensions every source agrees on are shown above rather than repeated per row.

Calculated from the published values.

Figure	How it is obtained	Result
Radial section height	(D − d) / 2	12.5 mm
Mean diameter d_m	(D + d) / 2	62.5 mm

Arithmetic on the figures above — not a bearing life calculation for your load case.

The works that publish LME50UU.

YTP

Ningbo, Zhejiang, China

Linear ball bearings and support units

Ningbo Yutong manufactures linear-motion ball bearings under the YTP brand. Its range includes standard and flanged linear bearings, nickel-plated designs, steel-cage variants, boxed bearing units and KH drawn-cup series. The company publishes a 3D component library and model-comparison tools, supporting selection by mounting dimensions and shaft interface.

Published ranges: Standard and flanged linear ball bearings · Nickel-plated and steel-cage variants · Boxed linear-bearing units · KH drawn-cup linear bearings

287 designations documented here · 1 reviewed evidence record · source recorded 2026-09-24

Ask YTP about LME50UU

Applications the publishing works state.

Application	Stated by
Linear-motion systems	YTP

Application areas each manufacturer states for its own range. Confirm load, speed, temperature and lubrication for your case.

Not documented by any source here.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Dynamic load rating · Static load rating · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Limiting speed — grease · Limiting speed — oil · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.

Ask the manufacturer for these when you enquire.

Neighbouring designations documented here.

Designation	Envelope d × D × B (mm)	Bearing family	Works
LME50LUU	—	Linear bearings	2
LME50UU-AJ	—	Linear bearings	1
LME50UU-OP	—	Linear bearings	1

Each envelope shown is that designation’s own published size.

Request a quote for LME50UU.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

Continue your search.

All linear bearings models →About this bearing type →How to read evidence →