BearingIndex
THE BEARINGINDEX DIRECTORY

LME8UU — 8 × 16 × 25 mm

BOUNDARY DIMENSIONSUNIT / mm
L = 25 mmD = 16 mmd = 8 mm
Boundary dimensions · schematic, not a product photograph or manufacturing drawing.
Linear bearings

LME8UU

LME8UU is a linear bearings designation documented on BearingIndex from 1 manufacturer publication. The published boundary dimensions are 8 × 16 × 25 mm. The publishing works are in Zhejiang province, China. Every value below comes from that manufacturer’s own published material, with the date it was recorded.

Bore d
8 mm
Outside D
16 mm
Length L
25 mm

Compare the 1 publication

What each manufacturer published.

ManufacturerReference mass (kg)Source recorded
YTP
LME8UU
0.022026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.

Calculated from the published values.

FigureHow it is obtainedResult
Radial section height(D − d) / 24 mm
Mean diameter dm(D + d) / 212 mm

Arithmetic on the figures above — not a bearing life calculation for your load case.

The works that publish LME8UU.

YTP

Ningbo, Zhejiang, China

Linear ball bearings and support units

YTP offers a linear-motion catalogue, cross-reference table and selection interface. The LM20UU/MX length difference and explicit reference-only MX sizes show why a replacement needs full interfaces and availability confirmation; qualify the shaft, alignment, load distribution and lubrication together, then reconcile calculation assumptions and applicable standard editions.

Published ranges: Standard and flanged linear ball bearings · Nickel-plated and steel-cage variants · Boxed linear-bearing units · KH drawn-cup linear bearings

287 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask YTP about LME8UU

Applications the publishing works state.

ApplicationStated by
Linear-motion systemsYTP

Application areas each manufacturer states for its own range. Confirm load, speed, temperature and lubrication for your case.

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Dynamic load rating · Static load rating · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Limiting speed — grease · Limiting speed — oil · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.

Ask the manufacturer for these when you enquire.

Request a quote for LME8UU.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. YTP · LME8UU source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.