BearingIndex
THE BEARINGINDEX DIRECTORY

SR144TLN — 3.175 × 6.35 × 2.38 mm

BOUNDARY DIMENSIONSUNIT / mm
B = 2.38 mmD = 6.35 mmd = 3.175 mm
Boundary dimensions · schematic, not a product photograph or manufacturing drawing.
Ball bearings

SR144TLN

SR144TLN is a ball bearings designation documented on BearingIndex from 1 manufacturer publication. The published boundary dimensions are 3.175 × 6.35 × 2.38 mm. The publishing works are in Fujian province, China. Every value below comes from that manufacturer’s own published material, with the date it was recorded.

Bore d
3.175 mm
Outside D
6.35 mm
Width B
2.38 mm

Compare the 1 publication

What each manufacturer published.

ManufacturerSource recorded
Runstar
SR144TLN
2026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.

Calculated from the published values.

FigureHow it is obtainedResult
Radial section height(D − d) / 21.59 mm
Mean diameter dm(D + d) / 24.76 mm

Arithmetic on the figures above — not a bearing life calculation for your load case.

The works that publish SR144TLN.

Runstar

Zhangzhou, Fujian, China

Miniature ball and thrust bearings

Runstar publishes miniature, flanged and thrust bearings, with separate dental and ceramic product routes. Its SF692 variants have different ring widths, and some published dimensional or mass entries require clarification. Use the complete designation and controlled drawing for the offered product; catalogue application labels do not establish medical approval or a verified ceramic composition.

Published ranges: Miniature deep groove ball bearings · Small deep groove ball bearings · Flat thrust ball bearings · Nonstandard miniature designs

223 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Runstar about SR144TLN

Applications the publishing works state.

ApplicationStated by
Fishing tackleRunstar
Medical equipmentRunstar
Precision instrumentsRunstar
Small motorsRunstar

Application areas each manufacturer states for its own range. Confirm load, speed, temperature and lubrication for your case.

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Dynamic load rating · Static load rating · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Limiting speed — grease · Limiting speed — oil · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter · Reference mass.

Ask the manufacturer for these when you enquire.

Other designations with the same 3.175x6.35x2.38 mm envelope.

DesignationBearing familyWorks
R144ZZ/2RSDeep groove ball1
SR144K1TLBall bearings1
SR144K1TLNBall bearings1
SR144TLBall bearings1
SR144TLZBall bearings1
SR144TLZ1Ball bearings1
SR144TLZ1NBall bearings1
SR144TLZNBall bearings1
SR144ZZ/2RSDeep groove ball1

Same envelope, but sealing, internal design, clearance and load capability differ — not interchangeable by default.

Neighbouring designations documented here.

DesignationEnvelope d × D × B (mm)Bearing familyWorks
SR1-41.9844 × 6.35 × 2.3812Deep groove ball1
SR1-4 2RS1.9844 × 6.35 × 3.5712Deep groove ball1
SR1-4 2RS EE1.9844 × 6.35 × 3.5712Deep groove ball1
SR1443.175 × 6.35 × 2.3812Deep groove ball1
SR144 EE3.175 × 6.35 × 2.3812Deep groove ball1
SR144K1TL3.175 × 6.35 × 2.38Ball bearings1
SR144K1TLN3.175 × 6.35 × 2.38Ball bearings1
SR144K1TLW3.175 × 6.35 × 2.78Ball bearings1
SR144TL3.175 × 6.35 × 2.38Ball bearings1
SR144TLW—Ball bearings1
SR144TLWN3.175 × 6.35 × 2.78Ball bearings1
SR144TLZ3.175 × 6.35 × 2.38Ball bearings1
SR144TLZ13.175 × 6.35 × 2.38Ball bearings1
SR144TLZ1N3.175 × 6.35 × 2.38Ball bearings1
SR144TLZ1W3.175 × 6.35 × 2.78Ball bearings1
SR144TLZ1WN3.175 × 6.35 × 2.78Ball bearings1
SR144TLZN3.175 × 6.35 × 2.38Ball bearings1
SR144TLZW3.175 × 6.35 × 2.78Ball bearings1

Each envelope shown is that designation’s own published size.

Request a quote for SR144TLN.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. Runstar · SR144TLN source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.