MBF’s UCF201 row explicitly places shaft diameter 12 in its mm column. The square housing row lists L 86 and J 64, but the examined housing-dimension group does not separately print its unit. The historic mm interpretation of L/J remains unconfirmed. Use the source’s unit drawing, not a radial-bearing sketch, to identify the mounting interfaces.
Bearing units
UCF201
UCF201 is a bearing units designation documented on BearingIndex from 1 manufacturer publication. The publishing works are in Hebei province, China. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.
A UCF201 quote must identify the 12 mm shaft and the complete square unit.
MBF’s catalogue places UCF201 and UCF201-8 in one square-unit dimension group, but gives them different shaft entries: 12 mm and 1/2 inch. Its UC201 insert appears in a separate table with different dimensions and weight. Resolve the bore and what is included before comparing a price; the current product webpage’s stated production range also starts above 201.
The shared housing row does not make UCF201-8 a 12 mm unit.
On MBF’s mounted-unit catalogue, printed page 8 [1], UCF201 and UCF201-8 occupy the same square-housing group. The shaft heading separates In and mm. Keep that distinction on the enquiry: an offer that quotes only the housing numbers leaves the bore unresolved.
MBF complete designation
Published shaft entry
Shared housing fields
UCF201
12, in the mm column
L 86 / J 64; housing-dimension unit not separately printed in this group.
UCF201-8
1/2, in the In column
The same grouped L 86 / J 64 entries.
One half inch converts to 12.7 mm. That conversion identifies a different nominal shaft entry; it is not a measured clearance, a tolerance for the 12 mm unit or permission to fit the inch proposal to the existing shaft. A matching L/J row cannot settle this difference.
The same page names Bolt Size M10 and gives unit weight 0.61 kg. M10 is the published bolt-size entry, rather than a supplied bolt grade, tightening torque or complete mounting-hole tolerance. Ask MBF to return its UCF201 drawing with the 12 mm shaft and mounting interfaces marked, including the units for L/J and the hole geometry. Attach the old square-unit mounting drawing or measured interface; keep any proposed inch-bore change visible in the quote.
Confirm that the 201 offer is current.MBF’s present mounted-bearing webpage [2] states a production range of “UC - UCP - UCF - UCT - UCFC - UCFL 204 to 312”, while the linked catalogue includes UCF201. Those two source locations do not establish that 201 is in stock or discontinued. Ask MBF to confirm current supply of the exact 12 mm complete UCF201 and identify the drawing revision and configuration it will quote.
Keep UC201’s insert data out of the UCF201 assembly specification.
Printed page 3 of the same MBF catalogue [1] gives UC201 under the UC2XX insert table; printed page 8 gives the UCF201 square unit. An insert-only quote can repeat the 12 mm bore while omitting the square housing. Use both the complete designation and supplied components to compare the offers.
Source entry
What the examined table gives
What it does not establish
UC201 insert, page 3
Dimensions in mm: d 12.000 / D 47.000 / B 31.000 / C 17.000. Weight 0.200 kg.
D 47 is an insert diameter; B/C are insert dimensions. These are not the square housing’s L/J dimensions or the complete-unit weight.
UC201 insert ratings, page 3
Basic dynamic 9880 N / static 6200 N.
The insert table supplies no complete UCF201 housing, attachment or mounted-assembly limit.
UCF201 square unit, page 8
Shaft 12 mm, grouped L 86 / J 64 and weight 0.61 kg.
The examined row supplies no assembly load rating, bolt torque or controlled interface tolerance.
Do not compare the 0.200 kg UC201 entry with the 0.61 kg UCF201 entry as though one supplier has made the same complete unit lighter. They describe different source entries and different supply scopes. Likewise, using 9880/6200 N as a square-housing or fastener limit would extend an insert rating beyond its published table.
For a complete-unit purchase, ask the quote to name UCF201 and list the insert, square housing and any attachment components actually included. For an insert-only repair, keep UC201 explicitly on the order and have MBF identify the existing housing interface and the offered insert drawing. The catalogue pairing is useful identification evidence; it does not authorize fitting an unspecified insert into any retained housing.
The resulting offer should answer three concrete questions: is its shaft entry 12 mm; is it a complete UCF201 or UC201 alone; and has MBF confirmed the exact 201 configuration for current supply? Resolve those before comparing commercial terms or using the separate insert ratings in an assembly calculation.
What each manufacturer published.
Manufacturer
Shaft diameter d (mm)
Housing length L — source number (unit unconfirmed)
86 Historical directory interpretation: L 86 mm. The exact UCF201 housing-dimension group lists 86 without separately printing a unit; obtain the offered controlled drawing.
64 Historical directory interpretation: J 64 mm. The examined housing-dimension group does not separately state its unit. The confirmed 12 mm shaft column does not settle J’s unit.
A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings.
MBF publishes tapered-roller, deep-groove and housed-insert ranges. Its mounted-unit catalogue separates shaft entries from housing interfaces; confirm the complete configuration and current drawing for an order.
Published ranges: Tapered roller bearings · Deep groove ball bearings · Insert ball bearings · Bearing housings
17 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08
Application areas each manufacturer states for its own range. Confirm load, speed, temperature and lubrication for your case.
Fields absent from the recorded dataset.
Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Dynamic load rating · Static load rating · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Limiting speed — grease · Limiting speed — oil · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.
Ask the manufacturer for these when you enquire.
Request a quote for UCF201.
Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.
Scanned 18-page original catalogue actually examined: printed page 8 distinguishes 12 mm UCF201 and 1/2 inch UCF201-8 with shared housing entries; printed page 3 explicitly gives UC201 insert dimensions in mm, mass and N load ratings. Housing L/J units are not separately printed; no controlled drawing, assembly load approval or torque is inferred.
Official page links the examined catalogue and states the UC/UCP/UCF/UCT/UCFC/UCFL production range 204–312. Its range statement does not confirm UCF201 stock, discontinuation or current quotation availability.
Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.
We use cookies and analytics to operate this website and measure visits. Form contents and private workspace pages are excluded from analytics. Privacy & cookies