BearingIndex
THE BEARINGINDEX DIRECTORY

MBF

Hebei Bowei presents MBF tapered-roller, deep-groove and insert/housing bearings from Linxi. Its product pages identify metric/inch tapered families, P0/P6 deep-groove options and multiple UC housing patterns. Actual downloaded deep-groove and pillow-block catalogue image pages contain useful dimension and interface tables. Specify complete configuration and installed conditions, and require order-linked inspection rather than relying on generic 100% checking or old certificates.

MBF · TAPERED ROLLERS, DEEP-GROOVE AND INSERT UNITS

Match the bearing construction and housing interfaces before choosing a catalogue row.

Hebei Bowei Bearing Co., Ltd. (河北博威轴承有限公司) markets MBF tapered-roller, deep-groove and insert bearings with housings, and describes production in Linxi, Hebei. Its official Chinese site links separate samples for each product line. The useful next step is a full designation and controlled assembly drawing: an inch cone/cup combination, a sealed deep-groove bearing and a housed unit have different selection and acceptance requirements. Staffing, output, automation and export percentages remain manufacturer statements, not verified current available capacity. Company introduction [1]

Prepare a sourcing inquiry
01

Start with what will actually be supplied.

Official rangeMeaning for your orderInformation to provide
Tapered rollersThe page lists single-row metric 302/303/313 and 320/322/323/329/330/331/332 families, plus H/HL/HM/JM/JL/LM/HH inch families.Complete cone and cup references or matched-assembly drawing, d/D, ring and total widths, shoulders/chamfers, load directions and setting method.
Deep-groove ballsThe page lists single-row families, P0/P6 and Z/ZZ/RS/2RS closure options. A general explanation mentioning double rows is not a specific double-row production list.Complete designation/suffix, precision standard/edition, clearance, closure material, grease/fill and operating conditions.
Insert and housed unitsThe page lists UC/UCP/UCF/UCT/UCFC/UCFL 204–312 and UCPA/UCFA/UCTB 204–212, while the linked catalogue includes additional illustrated rows.Metric/inch shaft size, full insert and housing designation, locking arrangement, centre height/bolt pattern, seals, lubricant and mounting loads.

These are advertised families, not a live stock list. Confirm the exact candidate, steel/cage/closure, production site and order quantity before assuming availability. The tapered sample link was attempted, but the PDF transfer did not complete; its model tables were not reviewed or used for ratings. Tapered range and download route [2] Deep-groove range [3] Insert range [4]

02

The downloaded image tables show useful distinctions—not a final order release.

Deep-groove construction and speed

Actual sample page 4 lists a base 6205 row with 25×52×15 mm dimensions and separate grease/oil speed columns, alongside Z, ZZ, RS and 2-RS construction drawings. Do not apply a base-row lubrication speed automatically to a contact-sealed suffix. Ask for the candidate’s closure, grease/fill, clearance, speed definition and operating-temperature/load conditions. Downloaded sample, page 4 actually viewed [5]

Housed-unit interface

Actual pillow-block sample page 5 groups UCP205 with inch-bore suffix variants. Its metric UCP205 row has 25 mm shaft diameter; the shared group lists H 36.5, L 140, J 105 mm and M10 bolts. Use the drawing’s feature labels and the exact bore suffix. A matching nominal unit family does not verify shaft fit, locking torque or housing load capacity. Downloaded UCP drawing/table actually viewed [6]

The pillow-block sample’s UC 3XX page separately distinguishes bearing ring widths B/C and gives bearing load ratings, while the UCP page gives the assembled housing’s mounting features. Do not substitute insert-bearing ratings for a complete housing or mounting-system rating. Request the full unit drawing, housing material and permissible loading/mounting instructions. Sample pages 4 and 5 [6]

Check an existing installation before requesting a substitute

Record bearing/insert and housing markings separately. Measure the shaft diameter with units, centre height, fixing pattern and available envelope; photograph locking, seals and lubrication points. Supply load directions, speed, temperature, dust/water exposure and the existing failure pattern. Obtain a comparison drawing and approval before changing bore suffix, housing pattern or closure.

03

“100% checked” still needs a list of measured characteristics.

The quality page states hardness/metallographic testing and checks of roundness, roughness, appearance and dimensions, plus 100% component inspection before assembly and 100% finished-bearing inspection before packing. This is a published control claim, not evidence that every destructive, life or performance test is performed on every item. Ask which features are measured individually, which are sampled, the limits/methods, instrument status and how results connect to each production lot. Actual quality-control wording [7]

  1. Approve candidate design and process. Agree steel grade/standard, thermal condition, precision/clearance, cage/closure and lubricant with drawing revision and tolerances.
  2. Approve a traceable sample. Require heat/lot identity, dimensional/rotational and relevant metallurgical records; define torque/noise or seal checks if required by the application.
  3. Approve the complete installation. For tapered rollers verify setting and load directions; for deep grooves check installed clearance and thermal behaviour; for units validate locking, mounting and environmental protection.
  4. Control repeat lots. Agree packaging/preservation, marking, process/design changes, acceptance sampling, complaint analysis and replacement responsibility.

Low-noise, long-life and low-maintenance wording on product pages supplies no quantified candidate guarantee. Set measurable criteria and service instructions for the actual arrangement. Tapered product statements [2] Deep-groove product statements [3] Insert product statements [4]

04

Use the current legal entity and certificate—not transposed website years.

The company text writes “ISO9001:2016” and “GB/T19001-2015”, whereas the actual English and Chinese certificate images show ISO 9001:2015 / GB/T 19001-2016. Both original images were visually read: they name Hebei Bowei Bearing Co., Ltd., describe bearing processing and sales including export, and show 31 May 2019 to 30 May 2022. Request a current original and issuer-status/site verification; those historical images cannot establish present certification. Actual introduction wording [1] Actual original certificate images [8]

A complete Hebei Industry and Information Technology Department notice dated 17 December 2024 lists 河北博威轴承有限公司 at row 812 in the fourth batch of innovative SMEs. The notice describes three-year validity and dynamic management. This is an enterprise-recognition record, not a bearing performance test or proof of current ISO renewal; confirm entity identity and any subsequent status changes in supplier approval. Government notice, PDF pages 1–2 and 24 [9]

The dedicated contact lists Manager Xu at 0319 8453 000 / 151 3133 0888, [email protected], and Manager Xiang at 186 3117 1981, [email protected]. The address is Canal Industrial Park, Hexi Town, Linxi County, Xingtai, Hebei. The domain uses boweibearing.com while Xu’s published email uses boweibearings.com; retain the actual published spelling and verify the responsible contact and sample receiving instructions. The downloaded samples also list Xiang’s mobile/email. Dedicated contacts [10] Sample contact [5] Sample contact [6]

YOUR NEXT STEP

Prepare an MBF construction and installation brief

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

17 model records
Model / bearing familyManufacturerBore dOutside DWidth B / T / LDetails
UCF218Bearing units
MBF90mm · Shaft d235mm · Housing L187mm · Bolt pitch JView model
UCF217Bearing units
MBF85mm · Shaft d220mm · Housing L175mm · Bolt pitch JView model
UCF215Bearing units
MBF75mm · Shaft d200mm · Housing L159mm · Bolt pitch JView model
UCF214Bearing units
MBF70mm · Shaft d193mm · Housing L152mm · Bolt pitch JView model
UCF213Bearing units
MBF65mm · Shaft d187mm · Housing L149mm · Bolt pitch JView model
UCF212Bearing units
MBF60mm · Shaft d175mm · Housing L143mm · Bolt pitch JView model
UCF211Bearing units
MBF55mm · Shaft d162mm · Housing L130mm · Bolt pitch JView model
UCF210Bearing units
MBF50mm · Shaft d143mm · Housing L111mm · Bolt pitch JView model
UCF209Bearing units
MBF45mm · Shaft d137mm · Housing L105mm · Bolt pitch JView model
UCF208Bearing units
MBF40mm · Shaft d130mm · Housing L102mm · Bolt pitch JView model
UCF207Bearing units
MBF35mm · Shaft d117mm · Housing L92mm · Bolt pitch JView model
UCF206Bearing units
MBF30mm · Shaft d108mm · Housing L83mm · Bolt pitch JView model

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Official dedicated company publicationMBF Bowei · company introduction ↗

    Main products and self-reported capacity/exports; transposed standard-year text requires certificate verification.

  2. Official family descriptionMBF Bowei · tapered-roller range ↗

    Metric/inch families; linked PDF incomplete transfer, model ratings not reviewed.

  3. Official product-family publicationMBF Bowei · deep-groove range ↗

    Single-row production listing, P0/P6 and closures; generic double-row explanation not a production table.

  4. Official product-family publicationMBF Bowei · insert and housing range ↗

    UC unit families; actual offered suffix and interface need confirmation.

  5. Complete 17-page PDF downloaded; selected image tables rendered and visually readMBF · deep-groove sample ↗

    Page 4 base 6205 and separate grease/oil columns, pages 4–5 viewed; not current issued suffix performance.

  6. Complete 18-page PDF downloaded; selected image tables rendered and visually readMBF · pillow-block sample ↗

    Pages 4–5 UC/UCP features and metric/inch grouping; full unit load rating not inferred from insert.

  7. Official inspection statementsMBF Bowei · quality control ↗

    100% checking and laboratory-feature claims; actual limits/lot evidence not audited.

  8. Official linked English/Chinese ISO images visually readMBF Bowei · original certificate presentation ↗

    Hebei Bowei entity, scope and past displayed dates; current renewal not established.

  9. Government complete 32-page PDF readHebei industry department · 2024 fourth-batch innovative SMEs ↗

    17 December 2024 notice and row 812 on page 24; enterprise recognition under dynamic management, not product/ISO approval.

  10. Official contact publicationMBF Bowei · dedicated contacts ↗

    Xu/Xiang channels and Canal Industrial Park address; actual receiving/order responsibility requires confirmation.

Report a source correction → · Return to inquiry checklist ↑

MBF published product scope reviewed

The manufacturer website describes tapered roller, ball and insert bearings.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:33

Source documentation retained for editorial review.