BearingIndex
THE BEARINGINDEX DIRECTORY

Dongtai

Taizhou Dongtai publishes alternator bearings with specific outer-ring retention or compensation features, not merely standard envelopes. Match the alternator unit and housing before substituting its EC6203-2RS or NPB10-46D examples. Its participation in the current tensioner/idler bearing standard is a drafting record, while lot qualification, current certificates and the factory receiving address still need confirmation.

DONGTAI · ALTERNATOR INTERFACES AND TENSIONER QUALIFICATION

Match the housing feature before replacing an alternator bearing.

Taizhou Dongtai Bearing Co., Ltd. (台州市东泰轴承有限公司) publishes automotive alternator bearings under YJ designations alongside deep-groove and tensioner categories. Two actual product details identify different outer-ring features, dimensions and alternator references. Those details provide a useful starting point for a replacement enquiry; they do not approve every vehicle carrying the listed brand. Actual company publication [1] EC6203-2RS detail [2] NPB10-46D detail [3]

Prepare a sourcing inquiry
01

The outside diameter does not describe the whole replacement.

Actual Dongtai examplePublished constructionReplacement reference
EC6203-2RS
17 × 40 × 12 mm
Two expansion-compensating nylon rings on the outside diameter; C3 clearance; high-temperature automotive alternator grease.For Ford, Lincoln and Mercury; replaces 6203-2HRLD. Published Lester references include 7773, 7780, 7781, 7787 and 8251.
NPB10-46D
10 × 23 × 11 mm
One eccentric anti-rotation ring on the outside diameter; C3 clearance; high-temperature automotive alternator grease.For Nissan; replaces B10-46. Published Lester 14655 / 14717 and alternator unit LR170-701B / LR170-702B.

These are the actual details of two examples, not specifications for every Dongtai product. The EC compensation rings and NPB eccentric anti-rotation ring serve different mounting interfaces. Request the controlled outside-diameter profile, ring material/geometry and retention requirements, then compare the housing and installation procedure. An ordinary bearing with the same nominal envelope is not established as an equivalent by the dimensions alone. EC construction and references [2] NPB construction and references [3]

Supply the complete alternator unit number, full bearing marking and drawing revision, rather than only “Ford” or “Nissan”. Check shaft shoulders, housing seat, ring position, end clearance and fit. The published cross-references are supplier selection information; they do not establish an OEM approval or every model-year application.

02

Ask for the installed result behind the C3 and grease description.

Both examples specify C3 and automotive alternator grease, but the reviewed details do not give a grease brand, fill quantity or numerical temperature qualification. Freeze the exact grease, seal construction and fill specification on the approved configuration, including substitution/change control. EC example [2] NPB example [3]

Before selecting the sample

Provide speed and duty cycle, belt loading, shaft/housing fits and materials, cold-start and hot operating conditions, exposure and allowed torque/noise. Ask for measured clearance with its measurement load and the estimated installed clearance.

Before accepting serial supply

Agree cold/hot starting and running torque, temperature rise, ring retention/anti-rotation performance, sealing and endurance under the actual alternator duty. Record the tested unit, bearing revision and pass limits.

The old technical clearance page cites ISO 5753-1991 and GB 4604-93 and separately discusses miniature MC groups and motor CM clearance. Those historical references are not a current standard confirmation, and MC or CM wording should not be substituted for the examples’ C3 requirement. Ask for the current applicable specification and model-specific measured values. Actual dated clearance guidance [4]

The oil/grease guidance is general technical background. Its description of lubrication methods does not define the ordered alternator’s lubricant or a universal service interval. Make the duty-specific lubricant and acceptance decision with the supplier’s engineering owner. Actual lubrication guidance [5]

03

Use the current standard as an enquiry reference, then qualify the supplied unit.

Dongtai publishes an automotive tensioner-bearing category. Identify whether the quotation includes the bearing alone, a pulley with bearing, or a larger tensioning assembly. The category image does not settle the supplied interfaces, vehicle interchange or validation scope. Provide the complete drawing, belt arrangement, loads, speed and environmental duty. Actual tensioner category [6]

The national standards platform lists Dongtai among the drafting organisations for JB/T 10859-2025, Rolling bearings — Automotive engine tensioner and idler bearings and their units. The record identifies it as current, published on 9 May 2025, effective 1 November 2025, replacing the 2008 edition. This is a specific drafting record, not proof that every quoted product conforms or is approved by a vehicle manufacturer. Actual official standard record [7]

  1. Identify the complete supplied configuration. Agree the bearing, pulley and other parts included, manufacturing responsibility and drawing revision.
  2. Set applicable acceptance requirements. Ask the supplier to identify the current standard edition and the additional customer/OEM requirements relevant to the application.
  3. Review candidate evidence. Request traceable test reports for the proposed configuration, then validate the installed assembly under the buyer’s duty before serial release.
04

Turn the published inspection flow into a traceable lot dossier.

The actual quality-system image shows incoming parts and auxiliary-material inspection, grinding and superfinishing control, intermediate and final assembly inspection, and finished-product shipment inspection. It also names clearance/vibration measurement and corrective/preventive improvement. Use this flow to ask who records each check for the ordered part. The diagram is not a current certificate, accredited laboratory scope or your lot’s inspection report. Actual quality-flow image viewed in browser [8]

Request the candidate’s control plan and lot traceability from material/heat treatment through finished geometry, clearance, seals/grease and vibration or functional checks. Agree sample size, units, fixtures and acceptance limits, and identify which tests are performed internally or by a qualified external provider.

The company publication includes a historical 1998 ISO 9002 claim. Obtain present management-system documents if your approval requires them, checking legal entity, site, scope and issuing-body status. Advertised annual output and equipment counts do not establish the capacity allocated to your model; ask for the actual sample and serial schedule. Actual historical company claims [1]

05

Resolve the address discrepancy before sending a sample or arranging an audit.

The home page gives 2329 Jiaobei Avenue, Zhang’an, Jiaojiang, Taizhou. The dedicated contact page lists 119 Yingfeng Road for both sales and the production base. Confirm the present manufacturing, audit and sample-receiving addresses in writing; the reviewed publications do not establish which location should receive your shipment. Actual home address [1] Actual sales/production contact [9]

The dedicated contact lists telephone +86-576-89003181 / 89003182, sales email [email protected] and production contact [email protected]. Identify the quotation/engineering owner and the legal company on the contract. Send the alternator unit and bearing details with the housing drawing and acceptance targets, then request a controlled configuration, validation plan, quantity, lead time and warranty proposal. Actual published contact roles [9]

YOUR NEXT STEP

Prepare a Dongtai alternator or tensioner enquiry

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

1 model records
Model / bearing familyManufacturerBore dOutside DWidth B / T / LDetails

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Official actual GB18030 contentDongtai · home and company publication ↗

    Company history, product positioning, historical ISO9002/capacity wording and Jiaobei Avenue2329; current qualification/address require confirmation.

  2. Official actual detail read in browserDongtai · EC6203-2RS ↗

    17x40x12, two nylon compensation rings, C3, grease description and specific alternator references; not universal interchange/OE approval.

  3. Official actual GB18030 detailDongtai · NPB10-46D ↗

    10x23x11, eccentric anti-rotation ring, C3 and published Nissan/Lester/unit references.

  4. Official actual dated technical contentDongtai · radial clearance guidance ↗

    Historical1991/1993 references and separate MC/CM groups; not current model-specific values.

  5. Official actual dated technical contentDongtai · oil/grease lubrication ↗

    General lubrication-method guidance only, not the candidate alternator grease or service interval.

  6. Official actual category contentDongtai · automotive tensioner category ↗

    Category publication; complete assembly supply and model qualification are not established.

  7. Primary official standard record actually readNational standards platform · JB/T10859-2025 ↗

    Current2025 standard, dates, replacement and Dongtai drafting participation; no blanket product conformance/OEM approval.

  8. Official actual diagram viewed in browserDongtai · quality-system flow ↗

    Incoming, grinding/superfinish, assembly/shipment checks and measurement/improvement flow; not a current certificate or lot report.

  9. Official actual GB18030 contact contentDongtai · sales and production contact ↗

    Yingfeng Road119 and specific sales/production channels; differs from homepage address.

Report a source correction → · Return to inquiry checklist ↑

Dongtai published product scope reviewed

The manufacturer website describes small ball bearings and automotive auxiliaries.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:33

Source documentation retained for editorial review.