BearingIndex
THE BEARINGINDEX DIRECTORY

FYB

FYB, Zhenjiang Feiya Bearing, traces its factory history to 1970 and restructuring to 1998. Its official catalogue covers needle-and-cage assemblies, drawn-cup and machined-ring needle bearings, combined bearings and track rollers. Select around the actual raceway, axial-load direction and mounting arrangement. Obtain current controlled drawings: the legacy bilingual catalogue contains translation/field inconsistencies and historical certification editions.

NEEDLE AND COMBINED BEARINGS · DEFINE THE RACEWAY AND LOAD PATH

Decide who supplies the raceway—and where the axial load goes.

FYB is the published brand of Zhenjiang Feiya Bearing Co., Ltd. (镇江飞亚轴承有限责任公司). The official site traces the factory to 1970 and its restructuring from Zhenjiang Bearing Factory to 1998. Its catalogue offers several distinct needle-bearing routes, combined radial/axial bearings and track rollers. These options change the shaft, housing, lubrication and assembly requirements; an identical bore-size request is not a complete selection brief. Actual company history [1] Actual family and series index [2]

Prepare a sourcing inquiry
01

A compact bearing changes what your shaft and housing must provide.

The official index distinguishes with-inner-ring NA49/NA69/NKI routes from without-inner-ring RNA49/RNA69/NK routes, alongside needle-and-cage components and separate IR/LR inner rings. Its machined-ring guidance additionally distinguishes caged/full-complement, sealed/unsealed and flanged/unflanged constructions. These are assembly choices, not interchangeable names. Actual series distinctions [2] Machined-ring construction guidance [3]

Assembly routeBuyer-controlled questionAsk FYB to approve
Without an inner ringCan the proposed shaft actually serve as the rolling surface?Raceway diameter, material, heat treatment, surface finish, geometry and installed clearance for the actual part.
With a supplied inner ringIs the ring included and does its length/fit suit the shaft and adjacent parts?Complete ring/bearing designation, shoulder geometry, fit, axial arrangement and component supply boundary.
Drawn-cup constructionWill the housing support the thin outer cup with the required installed geometry?Housing material/bore control, shaft or separate IR/LR ring, press-in tooling and post-installation checks.

The drawn-cup explanation specifically describes a ground shaft as the raceway, the option of IR/LR rings for an unhardened shaft and the importance of a rigid housing. It advises pressing with an assembly mandrel without tilting the cup. Request the installation method and current fit limits for your candidate rather than adopting its old generic fit table automatically. Actual drawn-cup explanation [4]

State load, speed, lubrication, contamination and operating temperature with the component choices. A material or temperature statement tied to one cage/seal construction is not a qualification of every FYB bearing.

02

Combined bearings need the thrust direction and arrangement on the drawing.

The catalogue lists NKIA/NKIB needle-and-angular-contact combinations, NX/NKX thrust-ball combinations, NKXR thrust-roller combinations and ZARN/ZARF double-direction thrust-cylinder combinations. The explanation describes a radial needle-bearing component combined with different thrust elements, sometimes using the shaft as the raceway or a separate IR ring. Identify the actual radial support and every axial load direction before proposing a series. Actual combined series index [2] Combined-bearing construction and installation guidance [5]

Give the complete load path

Send radial and axial loads separately, including reversals, speed/duty and how the shaft and housing locate the assembly. Ask which direction each candidate supports, whether an opposing arrangement is required and which component establishes location. Confirm thrust-component support and lubrication access.

Agree any preload, endplay and mounting requirements in the controlled assembly drawing. Broad family guidance does not establish the setting for a named supplied part.

Resolve a real bilingual discrepancy

The Chinese combined-bearing text discusses opposed installation for alternating axial loads; its English version says alternating radial loads. Do not approve an arrangement from the translation alone. Ask for a written, drawing-specific confirmation of load directions and mounting.

The page also contains legacy general percentage/preload and cage-temperature statements. Their application, definitions and present revision need supplier engineering approval for the particular candidate; they are not reproduced here as universal selection limits. Actual bilingual source and its limitations [5]

03

The actual ZARN catalogue illustrates why a full suffix and drawing matter.

The actual ZARN/ZARN…L page shows two different section drawings and a table with mm dimensions, separate radial and axial load columns and oil/grease limiting-speed columns in rpm. The page explicitly marks its load, speed and mass information as selection reference only. Treat it as a starting point for a supplier response, not a released machine-design specification. Actual browser-read ZARN table and viewed drawings [6]

One published row pairs ZARN1747TN with ZARN1547LTN while listing a 17 mm shaft/bore entry. That designation inconsistency must be resolved by FYB; this page neither silently changes the name nor approves an alternative part. Other dimensions, suffix construction and the distinction between the two drawings also need a current controlled drawing.

  1. Identify the full candidate. Include every suffix and whether the standard or L drawing is intended. Ask for supplier confirmation of any inconsistent legacy table entry.
  2. Review installation geometry. Check every relevant shoulder, axial dimension, ring face and clearance against the candidate drawing and mating shaft/housing.
  3. Separate ratings and working conditions. Request current radial/axial ratings, their definitions, lubrication/speed conditions and the supplier’s assessment of your actual duty.
  4. Approve evidence for this order. Link sample dimensional and functional records to the agreed drawing revision, material/cage/seal construction and lot identification.

The old page includes an institute contact different from today’s dedicated contact publication. Route technical questions through the dedicated engineering address and confirm the responsible person rather than assuming the old telephone remains active.

04

The wheel profile and mounting method belong in a roller enquiry.

The official roller guidance distinguishes support and stud-mounted constructions, cylindrical or curved outer profiles, caged or full-complement rolling elements and different seals. It also discusses eccentric adjustment for track matching. Send the actual rail/contact geometry and adjustment arrangement with the load and speed duty; bore diameter alone misses the working interface. Actual track-roller guidance [7]

  • For a support roller: identify the shaft/support arrangement, axial guidance and side-contact conditions.
  • For a stud-mounted follower: specify the mounting thread, fixing/access arrangement, track position and any adjustment need.
  • For either: provide rail material/geometry, alignment, shock duty, contamination and lubrication method; ask for the approved profile, contact capacity and inspection criteria.

The Chinese roller text states an outer-profile diameter tolerance of 0 to −0.05 mm, while the English text omits the minus sign. This is another reason to obtain an authoritative candidate drawing instead of accepting the bilingual webpage as a controlled tolerance sheet. No application-specific roller load, speed or life approval was established.

05

A verified drafting record is useful context; qualify the actual supply separately.

The national standards platform lists Zhenjiang Feiya as a principal drafting organization for GB/T 25768-2010, covering needle and double-direction thrust cylindrical roller combined bearings; its actual detail labels the standard current at review. A second actual platform record names the company in the track-roller revision project and links the published GB/T 6445-2021. These independently support specific drafting participation, not blanket conformity of every FYB part or a purchased lot. Actual national standard record [8] Actual track-roller project/publication record [9]

The Chinese company profile cites ISO/TS16949:2009 and ISO9001:2008 upgrades in 2012; the English profile uses older editions and different staff/equipment/product counts. These publications are not a verified current certificate or present capacity audit. Obtain certificate originals, issuer status and the exact covered legal entity/site. Request applicable current standard editions in the order rather than relying on the legacy technical pages’ 1990s/2001 references. Actual Chinese profile [1] Actual English profile and differences [10]

The dedicated contact page gives Sanmaogong, Zhufang Road, Zhenjiang, engineering [email protected], export [email protected] and domestic sales [email protected]. Published export phone is +86 511 85614402; domestic phones are +86 511 85623531 / 85623814. Confirm present contacts, exact factory/sample address and legal seller directly. The online-order form was read but no enquiry submitted or response-time tested. Actual dedicated contact [11]

YOUR NEXT STEP

Prepare a FYB raceway, load-direction and drawing brief

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

23 model records
Model / bearing familyManufacturerBore dOutside DWidth B / T / LDetails

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Actual official legacy publicationFYB · Chinese company profile ↗

    Factory history and 2012 historical system editions; scale/patent/client claims not independently audited.

  2. Actual official index and live browser readFYB · product and series index ↗

    Distinct ring, cage, combined and roller series; no automatic current stock or interchange approval.

  3. Actual official bilingual guidanceFYB · machined-ring needle-bearing guidance ↗

    Construction choices and old general precision/material conditions; require current candidate-specific release.

  4. Actual official bilingual guidanceFYB · drawn-cup needle-bearing guidance ↗

    Shaft/ring and thin-cup housing requirements, pressing advice; old generic fit table not reproduced as approved design.

  5. Actual official Chinese and English textFYB · combined needle-bearing guidance ↗

    Load-path and construction guidance; alternating axial/radial translation difference explicitly unresolved.

  6. Actual live-browser full text and viewed drawing/tableFYB · ZARN/ZARN…L dimensional/rating table ↗

    Original browser publication read despite local request timeouts; reference-only note, units and unresolved ZARN1747TN/ZARN1547LTN pair.

  7. Actual official bilingual guidanceFYB · track-roller guidance ↗

    Profiles/mounting and actual tolerance-sign disagreement; not an order-specific capacity certificate.

  8. Actual original government standard recordNational standards platform · GB/T 25768-2010 ↗

    Named principal drafting organization and standard metadata/status at review; no purchased-lot conformity established.

  9. Actual original government project recordNational standards platform · track-roller revision project ↗

    Named drafting participation and published GB/T 6445-2021 link; not supplier/product certification.

  10. Actual official legacy profileFYB · English company profile ↗

    Old editions/counts differ from Chinese profile; no current capacity or certificate inferred.

  11. Actual official contact publicationFYB · dedicated contacts ↗

    Distinct engineering/export/domestic routes and Zhufang Road address; activity/response and exact current site require direct confirmation.

Report a source correction → · Return to inquiry checklist ↑

FYB published product scope reviewed

The manufacturer website describes needle roller bearings and combined assemblies.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:33

Source documentation retained for editorial review.