Giant Bearings
Giant / BMT: industrial bearings and glove-production former holders, chains and parts, with an interface and operating-condition sourcing guide.
Qualify the bearing and the glove-line interface together.
Giant’s introduction identifies BMT and describes industrial/automotive bearings alongside bearings, former holders, chains and parts for PVC and nitrile-glove production. It calls Ningbo Giant a subsidiary of Ningbo Demai Electromechanical. Company publication [1] The useful sourcing distinction is whether you are buying one bearing, a complete holder or a chain/component set to match an existing production line.
Single, double and double-positioning holders need a line drawing.
The catalogue separately labels a single former holder SUS304, a double-positioning double former holder SUS304, and double-former chains. Single holder [2] Double holder [3] Chain [4] The reviewed holder pages show the products, but do not provide a complete readable installation drawing or numbered bill of materials. Several related entries share similar titles; identify the exact page and proposed part number.
Replacing the holder
Send the current line/holder drawing, attachment points, relevant spacing and clearance, former connection and operating arrangement. State single versus double and any positioning requirement. Ask for a dimensioned proposed assembly and an itemised list of included bearings, discs, springs and other components where applicable; the photograph is not the delivered contents list.
Replacing the chain or attached parts
Provide the actual chain pitch and attachment geometry, sprocket/interface drawing, intended load, speed and lubrication/cleaning conditions. Confirm the compatibility of the holder attachment with the offered chain. No pitch or interchangeability is inferred from the “double former” label.
Ask what the AS seal claim covers in your actual process.
The company introduction describes a developed high-temperature AS seal/cover and use above 180°C, alongside complex gas/corrosive environments. [1] No complete model-level thermal/chemical test record was obtained. This is a manufacturer capability statement; the page does not release every Giant bearing or complete holder for that temperature.
- Describe the exposure. Give actual temperature at the bearing location, duration/cycles, line speed and loads, cleaning agents, liquids/gases and how they reach the part. Distinguish continuous conditions from short peaks.
- Identify the complete build. Ask which AS seal variant, seal material, ring/ball/cage materials, lubricant and fill quantity apply to the proposed model. Confirm that the offered configuration corresponds to the stated duty.
- Agree an application test. Define measurable sealing, torque, wear or service-life acceptance and the test conditions with the responsible engineer. Record the approved assembly and maintenance/lubrication requirements; do not convert a seal statement into a whole-line life guarantee.
These are BearingIndex’s procurement questions, not an operating or installation procedure. No hot-process or chemical compatibility test has been performed by BearingIndex.
A conventional bearing order has its own evidence route.
Giant’s 60-series page provides general deep-groove construction explanation. A separate illustrated catalogue sheet shows dimension/load/speed columns and Z, ZZ, RS and 2RS closure drawings. 60-series explanation [5] Illustrated sheet [6] The sheet is useful for identifying the reference and construction to discuss; closure drawings alone do not identify seal material, grease or the supplied variant.
For a motor request, send the complete designation, fits, speed/load, temperature and noise/torque target. Ask for a current legible part sheet and agreed inspection limits, then validate the proposed bearing in the assembly. The site’s EMQ motor-bearing positioning does not identify a numerical noise limit or guarantee an installed sound level. [5]
Keep this separate from glove-line thermal qualification: approval of a general motor bearing is not approval of a former-holder bearing in a hot or corrosive process.
Confirm the Chinese contract and Malaysian service responsibilities.
Giant’s introduction names YUYAO ENGINEERING & PARTS SDN BHD as its Malaysian operation. [1] A separate YUYAO Engineering website publishes former holders, conveyor chains, line parts and former-holder service, with a Teluk Intan, Perak factory-location address. [7] These publications give a route for asking about local parts/service; current ownership, stock and support commitments were not independently audited.
Agree which entity issues the quotation/invoice, manufactures the parts, ships replacements and handles acceptance or service claims. Obtain the actual local service scope and current delivery quotation. A stated Malaysian operation does not establish same-day support, available stock or that every bearing is made there.
The Chinese contact page gives Shiao 183, Longfeng Village, Zhangting, Yuyao. [8] A government-hosted 2022 Yuyao employer record contains the exact Chinese company name and unified social credit code 91330281053820512D. [9] It is historical entity context, not a current factory audit or evidence of the subsidiary relationship.
The official introduction uses ISO/IATF 16949:2016 wording and describes process/material traceability. [1] Request complete current certificates, issuer/site/product scope and part-linked inspection records. Bearing quality-system wording does not automatically cover all holders, chains or the Malaysian service entity.
Prepare a Giant bearing, holder or chain inquiry.
Tick what you have ready. Copy the full checklist with its current status for your procurement notes.
Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.
Documented models.
1 model recordsEvidence, with boundaries.
Our review approach →Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.
- Manufacturer publicationGiant · company introduction ↗
BMT, Demai subsidiary statement, glove-line products, AS seal and Malaysian operation; current corporate/certificate/performance scope not independently validated.
- Manufacturer product pageGiant · single former holder SUS304 ↗
Named holder and photograph; full installation geometry, contents and whole-assembly material scope not obtained.
- Manufacturer product pageGiant · double-positioning double former holder SUS304 ↗
Specific product label and image; not interchangeability, dimensional drawing or complete material certification.
- Manufacturer product pageGiant · double-former chain ↗
Chain route and image; no pitch/interface specification or current availability inferred.
- Manufacturer category explanationGiant · 60-series deep-groove page ↗
General construction/application text and motor-bearing positioning; not part-specific noise, life or temperature qualification.
- Manufacturer illustrated tableGiant · illustrated bearing catalogue sheet ↗
Viewed dimensional/load/speed columns and closure drawings; no current revision, final variant or installed performance inferred.
- Separate operation publicationYUYAO Engineering · products and service routes ↗
Former holders/chains/line parts/service and Perak location; not independent corporate ownership, stock or service-level verification.
- Manufacturer contact publicationGiant · Chinese contact page ↗
Zhangting/Yuyao address and supplier route; confirm current site and dispatch before a visit/order.
- Historical government entity recordYuyao · 2022 employer record ↗
Exact Chinese name and unified social credit code; unrelated to product quality or current group relationship.
Report a source correction → · Return to inquiry checklist ↑
Giant Bearings published product scope reviewed
The manufacturer website describes motor bearings and glove-line components.
Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.
Company-level record; not a model test report · 2026-09-24 04:20:34
Source documentation retained for editorial review.