HOTO
HOTO publishes small motor-bearing families with dimensional and load tables. Compare the actual envelope, then qualify noise, lubrication and the producing site for your motor.
Start with the motor envelope. Finish with an installed test.
HOTO’s Ningbo company describes a small motor-bearing focus and names 695, 698, 605, 6900, 6000 and 6200–6203 among its main models. Its actual product detail pages provide more useful selection evidence than the older header links: dimensions, load ratings and separate grease/oil speed columns. These are catalogue entries, not proof of current stock or an approved quiet-running motor assembly. Company and main models [1] Actual 60-series table [2]
A 10 mm shaft does not make three families interchangeable.
HOTO’s actual 69, 60 and 62 tables use explicit millimetre dimensions and kN load columns. These three rows all have a 10 mm bore, but occupy different housing envelopes. They are a supplier catalogue comparison, not a recommendation to substitute one into an existing motor. 60 table [2] 62 table [3] 69 table [4]
| Published model | Envelope, d × D × B | Cr / Cor | Decision before RFQ |
|---|---|---|---|
| 6900 | 10 × 22 × 6 mm | 2.70 / 1.27 kN | Compact radial/axial envelope; check shaft and housing fits, duty and installed performance for the offered variant. |
| 6000 | 10 × 26 × 8 mm | 4.58 / 1.98 kN | Different outside diameter and width; an existing 6900 seat cannot be assumed to accept it. |
| 6200 | 10 × 30 × 9 mm | 5.10 / 2.38 kN | Check the larger seat and shoulder arrangement as well as duty; a larger catalogue rating alone does not resolve motor noise or temperature. |
The company’s main-model statement is narrower than the extensive tables. A listed row does not establish which sizes are made routinely, current tooling or a delivery slot. Ask HOTO to identify the exact production model and suffix, drawing revision, current manufacturing route and supply terms.
Separate catalogue speed, bearing inspection and motor acceptance.
Use the columns as written
The 6000 row lists 20,000 rpm for grease and 28,000 rpm for oil lubrication. The table does not identify the complete order suffix, seal arrangement, grease fill, installed preload or test conditions for those figures. Obtain a controlled specification for your offered variant and duty; do not use an oil figure to approve a grease-filled motor. Actual speed columns [2]
Define the bearing condition
Identify complete model/suffix, shields or seals, grease type and fill, clearance, shaft/housing fits, assembly force and any preload. Ask which parameters HOTO can control for that model.
Agree measurable inspection
State vibration/noise method, measurement speeds and bands, acceptance limits, sampling and lot records. “Silent” or “motor grade” alone leaves the pass/fail decision undefined.
Approve the installed motor
Test the actual motor’s start/run duty, thermal behaviour and sound under the agreed load and environment. Retain bearing lot and assembly settings so a passing sample can be traced into repeat supply.
These are buyer qualification steps. The reviewed catalogue does not establish a particular vibration grade, grease brand, guaranteed life or motor-level acoustic result.
A custom-bearing route needs a defined drawing and release.
HOTO’s nonstandard page explicitly offers customisation to customer requirements. The reviewed text does not give a material menu, tolerance class, minimum quantity, tooling price or lead time. Send a controlled drawing and separate mandatory features from options to be proposed. Require written feasibility and sample acceptance before committing the application to a custom envelope. Custom product entry [9]
Envelope and interfaces
Specify bore/outer diameter/width with units and tolerances, shoulders, corner radii and special features. Identify mating parts and the assembly method; approve a revision rather than a photograph.
Internal and lubrication requirements
Ask for the offered material, heat treatment, clearance, cage, shield/seal and lubrication build. Define permitted alternatives and how a change will be communicated and requalified.
Production release
The manufacturing page shows production, inspection and packing images with broad quality statements. It does not supply a controlled process flow, equipment capability report or order-linked inspection results. Request these for the offered part and lot. Manufacturing publication [5]
For a recurring motor programme, retain the approved drawing, sample and test report, producing site and lot identification. Agree containment and replacement responsibilities for a nonconforming batch, and approval of changes to grease, seals, material, process or site.
Public recognition and accredited tests answer different questions.
The original Ningbo 2024 second-batch technology-based SME list includes the exact company at entry 1,725, number 2024330211A0004864. This is a dated government listing; it is not a product approval, current laboratory accreditation or proof of a motor-bearing performance claim. Original list, page 70 [7]
The company description uses “ISO:2008 GB/T 19001-2008” wording. Its research page additionally claims a CNAS laboratory, national technology-centre status and extensive research capabilities. A current issuer certificate and scope, laboratory accreditation number/annex and status were not established in this review. Obtain the exact entity/site, expiry and relevant test scope, then verify the required credential through its issuer before relying on it in supplier approval. System wording [1] Research claims [6]
Ask who will perform the proposed noise, dimensional or durability test, by what method and under whose responsibility. If outsourced, identify that laboratory and its covered method. Public SME recognition does not independently corroborate all website research claims; a missing verification result also does not prove a claim false.
Clarify where the quoted bearing will actually be made.
The dedicated contact page labels the headquarters at 111 Chenjia Road, Chenjia Village, Jiaochuan, Zhenhai, Ningbo, telephone 0574-86366255 and fax 0574-86360898. Published emails are [email protected], [email protected] and [email protected]. Verify the authorised sales/engineering contact, legal contracting name and payment details directly. Headquarters contact [8]
Historical construction is not current production
The timeline describes a Henan branch being planned in December 2020 and a building under construction in August 2021. It does not establish present production status or which model will come from it. Ask for the proposed producing site and its qualified process/inspection scope. Development timeline [1]
Confirm sample availability, tooling costs, order quantity/MOQ, manufacturing slot, delivery and claim handling for the exact model. Catalogue breadth, dated facility/headcount statements and development plans are not a current capacity reservation.
Prepare a HOTO motor-bearing approval brief
Tick what you have ready. Copy the full checklist with its current status for your procurement notes.
Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.
Documented models.
29 model recordsEvidence, with boundaries.
Our review approach →Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.
- Manufacturer publicationHOTO · company and dated development timeline ↗
Small motor-bearing focus, main models, old system wording and 2020–2021 Henan development statements; current capacity and certification not inferred.
- Original manufacturer table, browser checkedHOTO · actual 60-series detail table ↗
Explicit mm and kN columns; 6000 dimensions, load and separate grease/oil speeds. Offered suffix and operating conditions require confirmation.
- Original manufacturer tableHOTO · actual 62-series detail table ↗
6200 dimensions and catalogue Cr/Cor, compared with the same-bore 6000 and 6900. No substitution or stock claim.
- Original manufacturer tableHOTO · actual 69-series detail table ↗
6900 dimensions and ratings; suspect published speed values identified without correction or endorsement.
- Manufacturer facility and inspection publicationHOTO · manufacturing and quality ↗
Production, inspection and packing images and broad statements; no order-linked capability or numerical acceptance inferred.
- Manufacturer claims, verification incompleteHOTO · research and development ↗
CNAS and technology-centre claims read; current accreditation number, status, test scope and issuer records were not established.
- Primary government list, original PDF readNingbo · 2024 second-batch technology-based SME list ↗
Page 70, entry 1,725: exact company and 2024330211A0004864. A dated listing, not laboratory or bearing certification.
- Manufacturer contact publicationHOTO · headquarters contact and website footer ↗
Ningbo headquarters, phone, fax and emails; unexplained Hebei footer address requires identity/site clarification.
- Manufacturer product publicationHOTO · nonstandard custom bearings ↗
Customer customisation offered; no controlled material menu, tolerance, quantity, tooling cost or lead time established.
Report a source correction → · Return to inquiry checklist ↑
HOTO published product scope reviewed
The manufacturer website describes miniature deep groove motor bearings.
Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.
Company-level record; not a model test report · 2026-09-24 04:20:34
Source documentation retained for editorial review.